Dongle settings

Jump to bottom

Linar Yusupov edited this page Nov 26, 2019 · 9 revisions

Plug your LilyGO® & SoftRF T-Motion dongle into USB slot of a Windows PC/tablet.
The board should appear in the list of hardware as a COM port:

Connect to the COM port while using PuTTY utility as follows:

Skip boot-time diagnostic messages and wait for a flow of NMEA sentences to come up:

Open up a browser and follow this URL to access SoftRF on-line settings tool.
Select your desired SoftRF unit settings.
The settings are explained on this page in details.
In the example below, default OGNTP radio protocol setting is changed onto Legacy.

While using your pointing device (mouse, touchpad, etc), select an automatically generated "NMEA control sentence" line and do "Copy".
Make sure that you've copied the sentence in full, because invisible trailing "Carriage Return" and "Line Feed" symbols does matter.
Switch onto your PuTTY window and do "Paste".
You should see that your settings has become applied and restart is initiated:

Your device is ready to go. Plug it out and use for intended purpose.