fib_failed_due_to_hw_res_exhaust_test

TE-9.1: FIB FAILURE DUE TO HARDWARE RESOURCE EXHAUST

Summary

Validate gRIBI FIB_FAILED functionality.

Procedure

• Connect ATE port-1 to DUT port-1, and ATE port-2 to DUT port-2.

• Establish a gRIBI connection (SINGLE_PRIMARY and PRESERVE mode) to the DUT.

• Establish BGP session between ATE Port1 --- DUT Port1. Inject unique BGP routes to exhaust FIB on DUT.

• Continuously injecting the following gRIB structure until FIB FAILED is received. Each DstIP and VIP should be unique and of /32. All the NHG and NH should be unique (of unique ID). DstIP/32 -> NHG -> NH {next-hop:} -> VIP/32 -> NHG -> NH {next-hop: AtePort2Ip}

• Expect FIB_PROGRAMMED message until the first FIB_FAILED message received.

• Validate that traffic for the FIB_FAILED route will not get forwarded.

• Pick any route that received FIB_PROGRAMMED. Validate that traffic hitting the route should be forwarded to port2

Protocol/RPC Parameter coverage

• gRIBI
  • Flush

Config parameter coverage

Telemery parameter coverage