forked from openconfig/featureprofiles
-
Notifications
You must be signed in to change notification settings - Fork 0
chained_policies_test
Github Action edited this page Jun 10, 2024
·
1 revision
- A list of policies to be attached to a neighbor's import-policy
- A list of policies to be attached to a neighbor's export-policy
- Applicable to both IPv4 and IPv6 BGP neighbors
For each section of configuration below, prepare a gnmi.SetBatch with all the configuration items appended to one SetBatch. Then apply the configuration to the DUT in one gnmi.Set using the replace
option.
- Connect DUT port-1, 2 to ATE port-1, 2
- Configure IPv4/IPv6 addresses on the ports
- Create an IPv4 networks i.e.
ipv4-network-1 = 192.168.10.0/24
attached to ATE port-1 - Create an IPv6 networks i.e.
ipv6-network-1 = 2024:db8:128:128::/64
attached to ATE port-1 - Create an IPv4 networks i.e.
ipv4-network-2 = 192.168.20.0/24
attached to ATE port-2 - Create an IPv6 networks i.e.
ipv6-network-2 = 2024:db8:64:64::/64
attached to ATE port-2 - Configure IPv4 and IPv6 eBGP between DUT Port-1 and ATE Port-1
- Note: Chained policies will be applied to this eBGP session later in the test to validate the results
- /network-instances/network-instance/protocols/protocol/bgp/global/config
- /network-instances/network-instance/protocols/protocol/bgp/global/afi-safis/afi-safi/config/
- Advertise
ipv4-network-1 = 192.168.10.0/24
andipv6-network-1 = 2024:db8:128:128::/64
from ATE to DUT over the IPv4 and IPv6 eBGP session on port-1
- Configure IPv4 and IPv6 eBGP between DUT Port-2 and ATE Port-2
- Note: This eBGP session is only used to advertise prefixes to DUT and receive prefixes from DUT
- /network-instances/network-instance/protocols/protocol/bgp/global/config
- /network-instances/network-instance/protocols/protocol/bgp/global/afi-safis/afi-safi/config/
- Advertise
ipv4-network-2 = 192.168.20.0/24
andipv6-network-2 = 2024:db8:64:64::/64
from ATE to DUT over the IPv4 and IPv6 eBGP session on port-2 - Set default import and export policy to
ACCEPT_ROUTE
for this eBGP session only- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
- Configure an IPv4 route-policy definition with the name
match-policy-v4
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
match-policy-v4
configure a statement with the namematch-statement-v4
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
match-policy-v4
statementmatch-statement-v4
set policy-result asACCEPT_ROUTE
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- Configure a prefix-set with the name
prefix-set-v4
and modeIPV4
- /routing-policy/defined-sets/prefix-sets/prefix-set/config/name
- /routing-policy/defined-sets/prefix-sets/prefix-set/config/mode
- For prefix-set
prefix-set-v4
set the ip-prefix toipv4-network-1
i.e.192.168.10.0/24
and masklength toexact
- /routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/ip-prefix
- /routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/masklength-range
- For routing-policy
match-policy-v4
statementmatch-statement-v4
set match options toANY
- /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/match-set-options
- For routing-policy
match-policy-v4
statementmatch-statement-v4
set prefix set toprefix-set-v4
- /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/prefix-set
- Configure an IPv4 route-policy definition with the name
lp-policy-v4
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
lp-policy-v4
configure a statement with the namelp-statement-v4
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
lp-policy-v4
statementlp-statement-v4
set policy-result asACCEPT_ROUTE
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- For routing-policy
lp-policy-v4
statementlp-statement-v4
set local-preference to200
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-local-pref
- Set default import policy to
REJECT_ROUTE
(Note: even though this is the OC default, the DUT should still accept this configuration)- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
- Add both policies in the specified order to the leaf-list
import-policy
:[match-policy-v4, lp-policy-v4]
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
- Use gNMI
replace
to send the configuration to the DUT. - Use gNMI
subscribe
with modeonce
to retrieve the configurationstate
from the DUT. This is to confirm the chained import policies are successfully applied to the DUT BGP neighbor on ATE Port-1- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
- Validate that the DUT receives the prefix
ipv4-network-1
i.e.192.168.10.0/24
from BGP neighbor on ATE Port-1- /network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv4-unicast/loc-rib/routes/route/prefix
- Validate that the prefix
ipv4-network-1
i.e.192.168.10.0/24
on DUT from BGP neighbor on ATE Port-1 has local preference set to 200- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/state/local-pref
- Initiate traffic from ATE Port-2 towards the DUT destined to
ipv4-network-1
i.e.192.168.10.0/24
- Validate that the traffic is received on ATE Port-1
- Configure an IPv4 route-policy definition with the name
asp-policy-v4
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
asp-policy-v4
configure a statement with the nameasp-statement-v4
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
asp-policy-v4
statementasp-statement-v4
set AS-PATH prepend to the ASN of the DUT- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/asn
- Configure an IPv4 route-policy definition with the name
med-policy-v4
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
med-policy-v4
configure a statement with the namemed-statement-v4
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
med-policy-v4
statementmed-statement-v4
set policy-result asACCEPT_ROUTE
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- For routing-policy
med-policy-v4
statementmed-statement-v4
set MED to1000
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-med
- Set default export policy to
REJECT_ROUTE
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
- Add both policies in order to the
export-policy
leaf-list, ie:[asp-policy-v4, med-policy-v4]
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
- Verify that chained export policies are successfully applied to the DUT BGP neighbor on ATE Port-1
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
- Validate that the ATE receives the prefix
ipv4-network-2
i.e.192.168.20.0/24
from BGP neighbor on DUT Port-1- /network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv4-unicast/loc-rib/routes/route/prefix
- Validate that the prefix
ipv4-network-2
i.e.192.168.20.0/24
on ATE from BGP neighbor on DUT Port-1 has AS-PATH with the ASN of DUT occuring twice- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/as-path/as-segment/state/member
- Validate that the prefix
ipv4-network-2
i.e.192.168.20.0/24
on ATE from BGP neighbor on DUT Port-1 has MED set to1000
- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/state/med
- Initiate traffic from ATE Port-1 towards the DUT destined
ipv4-network-2
i.e.192.168.20.0/24
- Validate that the traffic is received on ATE Port-2
- Configure an IPv6 route-policy definition with the name
match-policy-v6
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
match-policy-v6
configure a statement with the namematch-statement-v6
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
match-policy-v6
statementmatch-statement-v6
set policy-result asACCEPT_ROUTE
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- Configure a prefix-set with the name
prefix-set-v6
and modeIPV6
- /routing-policy/defined-sets/prefix-sets/prefix-set/config/name
- /routing-policy/defined-sets/prefix-sets/prefix-set/config/mode
- For prefix-set
prefix-set-v6
set the ip-prefix toipv6-network-1
i.e.2024:db8:128:128::/64
and masklength toexact
- /routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/ip-prefix
- /routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/masklength-range
- For routing-policy
match-policy-v6
statementmatch-statement-v6
set match options toANY
- /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/match-set-options
- For routing-policy
match-policy-v6
statementmatch-statement-v6
set prefix set toprefix-set-v6
- /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/prefix-set
- Configure an IPv6 route-policy definition with the name
lp-policy-v6
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
lp-policy-v6
configure a statement with the namelp-statement-v6
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
lp-policy-v6
statementlp-statement-v6
set policy-result asACCEPT_ROUTE
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- For routing-policy
lp-policy-v6
statementlp-statement-v6
set local-preference to200
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-local-pref
- Set default import policy to
REJECT_ROUTE
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
- Add both policies in order to the leaf-list
import-policy
:[match-policy-v6, lp-policy-v6]
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
- Verify that chained import policies are successfully applied to the DUT BGP neighbor on ATE Port-1
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
- Validate that the DUT receives the prefix
ipv6-network-1
i.e.2024:db8:128:128::/64
from BGP neighbor on ATE Port-1- /network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv6-unicast/loc-rib/routes/route/prefix
- Validate that the prefix
ipv6-network-1
i.e.2024:db8:128:128::/64
from BGP neighbor on ATE Port-1 has local preference set to 200- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/state/med
- Initiate traffic from ATE Port-2 towards the DUT destined to
ipv6-network-1
i.e.2024:db8:128:128::/64
- Validate that the traffic is received on ATE Port-1
- Configure an IPv6 route-policy definition with the name
asp-policy-v6
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
asp-policy-v6
configure a statement with the nameasp-statement-v6
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
asp-policy-v6
statementasp-statement-v6
set AS-PATH prepend to the ASN of the DUT- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-as-path-prepend/config/asn
- Configure an IPv6 route-policy definition with the name
med-policy-v6
- /routing-policy/policy-definitions/policy-definition/config/name
- For routing-policy
med-policy-v6
configure a statement with the namemed-statement-v6
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- For routing-policy
med-policy-v6
statementmed-statement-v6
set policy-result asACCEPT_ROUTE
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- For routing-policy
med-policy-v6
statementmed-statement-v6
set MED to1000
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-med
-
Set default export policy to
REJECT_ROUTE
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
-
Add both policies in order to the leaf-list
export-policy
:[asp-policy-v6, med-policy-v6]
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
- Verify that chained export policies are successfully applied to the DUT BGP neighbor on ATE Port-1
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
- Validate that the ATE receives the prefix
ipv6-network-2
i.e.2024:db8:64:64::/64
from BGP neighbor on DUT Port-1- /network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv6-unicast/loc-rib/routes/route/prefix
- Validate that the prefix
ipv6-network-2
i.e.2024:db8:64:64::/64
on ATE from BGP neighbor on DUT Port-1 has AS-PATH with the ASN of DUT occuring twice- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/as-path/as-segment/state/member
- Validate that the prefix
ipv6-network-2
i.e.2024:db8:64:64::/64
from BGP neighbor on DUT Port-1 has MED set to1000
- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/state/med
- Initiate traffic from ATE Port-1 towards the DUT destined to
ipv6-network-1
i.e.2024:db8:64:64::/64
- Validate that the traffic is received on ATE Port-2
- /network-instances/network-instance/protocols/protocol/bgp/global/config
- /network-instances/network-instance/protocols/protocol/bgp/global/afi-safis/afi-safi/config/
- /routing-policy/policy-definitions/policy-definition/config/name
- /routing-policy/policy-definitions/policy-definition/statements/statement/config/name
- /routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- /routing-policy/defined-sets/prefix-sets/prefix-set/config/name
- /routing-policy/defined-sets/prefix-sets/prefix-set/config/mode
- /routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/ip-prefix
- /routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/masklength-range
- /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/match-set-options
- /routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/prefix-set
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-import-policy
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/default-export-policy
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/import-policy
- /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/state/export-policy
- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/as-path/as-segment/state/member
- /network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv6-unicast/loc-rib/routes/route/prefix
- /network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv4-unicast/loc-rib/routes/route/prefix
- /network-instances/network-instance/protocols/protocol/bgp/rib/attr-sets/attr-set/state/med
rpcs:
gnmi:
gNMI.Get:
gNMI.Subscribe:
- vRX
-
Home
- Test Plans
- Authz: General Authz (1-4) tests
- CNTR-2: Container network connectivity tests
- DP-1.2: QoS policy feature config
- DP-1.3: QoS ECN feature config
- DP-1.4: QoS Interface Output Queue Counters
- DP-1.7: One strict priority queue traffic test
- DP-1.8: Two strict priority queue traffic test
- DP-1.9: WRR traffic test
- DP-1.10: Mixed strict priority and WRR traffic test
- DP-1.11: Bursty traffic test
- DP-1.14: QoS basic test
- example-0.1: Topology Test
- FP-1.1: Power admin DOWN/UP Test
- gNMI-1.1: cli Origin
- gNMI-1.2: Benchmarking: Full Configuration Replace
- gNMI-1.3: Benchmarking: Drained Configuration Convergence Time
- gNMI-1.4: Telemetry: Inventory
- gNMI-1.5: Telemetry: Port Speed Test
- gNMI-1.8: Configuration Metadata-only Retrieve and Replace
- gNMI-1.9: Get requests
- gNMI-1.10: Telemetry: Basic Check
- gNMI-1.11: Telemetry: Interface Packet Counters
- gNMI-1.12: Mixed OpenConfig/CLI Origin
- gNMI-1.13: Optics Telemetry, Instant, threshold, and miscellaneous static info
- gNMI-1.14: OpenConfig metadata consistency during large config push
- gNMI-1.15: Set Requests
- gNMI-1.16: fabric redundancy test
- gNMI-1.17: Controller Card redundancy test
- gNMI-1.18: gNMI subscribe with sample mode for backplane capacity counters
- gNMI-1.19: ConfigPush after Control Card switchover
- gNMI-1.20: Telemetry: Optics Thresholds
- gNMI-1.21: Integrated Circuit Hardware Resource Utilization Test
- gNMI-1.22: Controller card port attributes
- gNMI-1.27: gNMI Sample Mode Test
- gNOI-2.1: Packet-based Link Qualification
- gNOI-3.1: Complete Chassis Reboot
- gNOI-3.2: Per-Component Reboot
- gNOI-3.3: Supervisor Switchover
- gNOI-3.4: Chassis Reboot Status and Reboot Cancellation
- gNOI-4.1: Software Upgrade
- gNOI-5.1: Ping Test
- gNOI-5.2: Traceroute Test
- gNOI-5.3: Copying Debug Files
- gNOI-6.1: Factory Reset
- Health-1.1: Generic Health Check
- Health-1.2: Healthz component status paths
- MGT-1: Management HA solution test
- MTU-1.3: Large IP Packet Transmission
- OC-1.2: Default Address Families
- OC-26.1: Network Time Protocol (NTP)
- P4RT-1.1: Base P4RT Functionality
- P4RT-1.2: P4RT Daemon Failure
- P4RT-2.1: P4RT Election
- P4RT-2.2: P4RT Metadata Validation
- P4RT-3.1: Google Discovery Protocol: PacketIn
- P4RT-3.2: Google Discovery Protocol: PacketOut
- P4RT-5.1: Traceroute: PacketIn
- P4RT-5.2: Traceroute Packetout
- P4RT-6.1: Required Packet I/O rate: Performance
- P4RT-7.1: LLDP: PacketIn
- P4RT-7.2: LLDP: PacketOut
- Replay-1.0: Record/replay presession test
- Replay-1.1: Record/replay diff command trees test
- Replay-1.2: P4RT Replay Test
- RT-1.1: Base BGP Session Parameters
- RT-1.2: BGP Policy & Route Installation
- RT-1.3: BGP Route Propagation
- RT-1.4: BGP Graceful Restart
- RT-1.5: BGP Prefix Limit
- RT-1.7: Local BGP Test
- RT-1.10: BGP Keepalive and HoldTimer Configuration Test
- RT-1.11: BGP remove private AS
- RT-1.12: BGP always compare MED
- RT-1.14: BGP Long-Lived Graceful Restart
- RT-1.19: BGP 2-Byte and 4-Byte ASN support
- RT-1.21: BGP TCP MSS and PMTUD
- RT-1.23: BGP AFI SAFI OC DEFAULTS
- RT-1.24: BGP 2-Byte and 4-Byte ASN support with policy
- RT-1.25: Management network-instance default static route
- RT-1.26: Basic static route support
- RT-1.27: Static route to BGP redistribution
- RT-1.28: BGP to IS-IS redistribution
- RT-1.29: BGP chained import/export policy attachment
- RT-1.30: BGP nested import/export policy attachment
- RT-1.32: BGP policy actions - MED, LocPref, prepend, flow-control
- RT-1.33: BGP Policy with prefix-set matching
- RT-1.51: BGP multipath ECMP
- RT-1.52: BGP multipath UCMP support with Link Bandwidth Community
- RT-2.1: Base IS-IS Process and Adjacencies
- RT-2.2: IS-IS LSP Updates
- RT-2.6: IS-IS Hello-Padding enabled at interface level
- RT-2.7: IS-IS Passive is enabled at interface level
- RT-2.8: IS-IS metric style wide not enabled
- RT-2.9: IS-IS metric style wide enabled
- RT-2.10: IS-IS change LSP lifetime
- RT-2.11: IS-IS Passive is enabled at the area level
- RT-2.12: Static route to IS-IS redistribution
- RT-2.13: Weighted-ECMP for IS-IS
- RT-2.14: IS-IS Drain Test
- RT-3.1: Policy based VRF selection
- RT-3.2: Multiple <Protocol, DSCP> Rules for VRF Selection
- RT-4.10: AFTs Route Summary
- RT-5.1: Singleton Interface
- RT-5.2: Aggregate Interfaces
- RT-5.3: Aggregate Balancing
- RT-5.4: Aggregate Forwarding Viable
- RT-5.5: Interface hold-time
- RT-5.6: Interface Loopback mode
- RT-5.8: IPv6 Link Local
- RT-5.9: Disable IPv6 ND Router Arvetisment
- RT-5.10: IPv6 Link Local generated by SLAAC
- RT-6.1: Core LLDP TLV Population
- RT-7.1: BGP default policies
- RT-7.2: BGP Policy Community Set
- RT-7.3: BGP Policy AS Path Set
- RT-7.4: BGP Policy AS Path Set and Community Set
- RT-7.5: BGP Policy - Match and Set Link Bandwidth Community
- RT-7.8: BGP Policy Match Standard Community and Add Community Import/Export Policy
- RT-7.11: BGP Policy - Import/Export Policy Action Using Multiple Criteria
- SEC-3.1: Authentication
- SFLOW-1: sFlow Configuration and Sampling
- System-1: System testing
- TE-1.1: Static ARP
- TE-1.2: My Station MAC
- TE-2.1: gRIBI IPv4 Entry
- TE-2.2: gRIBI IPv4 Entry With Aggregate Ports
- TE-3.1: Base Hierarchical Route Installation
- TE-3.2: Traffic Balancing According to Weights
- TE-3.3: Hierarchical weight resolution
- TE-3.5: Ordering: ACK Received
- TE-3.6: ACK in the Presence of Other Routes
- TE-3.7: Base Hierarchical NHG Update
- TE-3.31: Hierarchical weight resolution with PBF
- TE-4.1: Base Leader Election
- TE-4.2: Persistence Mode
- TE-5.1: gRIBI Get RPC
- TE-6.1: Route Removal via Flush
- TE-6.2: Route Removal In Non Default VRF
- TE-8.1: DUT Daemon Failure
- TE-8.2: Supervisor Failure
- TE-9.1: FIB FAILURE DUE TO HARDWARE RESOURCE EXHAUST
- TE-9.2: MPLS based forwarding Static LSP
- TE-9: gRIBI MPLS Compliance
- TE-10: gRIBI MPLS Forwarding
- TE-11.1: Backup NHG: Single NH
- TE-11.2: Backup NHG: Multiple NH
- TE-11.3: Backup NHG: Actions
- TE-11.21: Backup NHG: Multiple NH with PBF
- TE-11.31: Backup NHG: Actions with PBF
- TE-13.1: gRIBI route ADD during Failover
- TE-13.2: gRIBI route DELETE during Failover
- TE-14.1: gRIBI Scaling
- TE-14.2: encap and decap scale
- TE-15.1: gRIBI Compliance
- TE-16.1: basic encapsulation tests
- TE-16.2: encapsulation FRR scenarios
- TE-17.1: VRF selection policy driven TE
- TR-6.1: Remote Syslog feature config
- TRANSCEIVER-1: Telemetry: 400ZR Chromatic Dispersion(CD) telemetry values streaming
- TRANSCEIVER-3: Telemetry: 400ZR Optics firmware version streaming
- TRANSCEIVER-4: Telemetry: 400ZR RX input and TX output power telemetry values streaming.
- TRANSCEIVER-5: Configuration: 400ZR channel frequency, output TX launch power and operational mode setting.
- TRANSCEIVER-6: Telemetry: 400ZR Optics performance metrics (pm) streaming.
- TRANSCEIVER-7: Telemetry: 400ZR Optics inventory info streaming
- TRANSCEIVER-8: Telemetry: 400ZR Optics module temperature streaming.
- TRANSCEIVER-9: Telemetry: 400ZR TX laser bias current telemetry values streaming.
- TRANSCEIVER-10: Telemetry: 400ZR Optics FEC(Forward Error Correction) Uncorrectable Frames Streaming.
- TRANSCEIVER-11: Telemetry: 400ZR Optics logical channels provisioning and related telemetry.
- TRANSCEIVER-12: Telemetry: 400ZR Transceiver Supply Voltage streaming.
- TRANSCEIVER-13: Configuration: 400ZR Transceiver Low Power Mode Setting.
- TUN-1.4: Interface based IPv6 GRE Encapsulation
- TUN-1.9: GRE inner packet DSCP
- Test Plans