In the otelcol docs, refer to either server or client TLS config.

docs/sources/reference/components/otelcol.auth.oauth2.md

@@ -67,7 +67,7 @@ tls       | [tls][] | TLS settings for the token client. | no
 
 The `tls` block configures TLS settings used for connecting to the token client. If the `tls` block isn't provided, TLS won't be used for communication.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ## Exported fields
 

docs/sources/reference/components/otelcol.exporter.loadbalancing.md

@@ -213,7 +213,7 @@ able to handle and proxy HTTP/2 traffic.
 
 The `tls` block configures TLS settings used for the connection to the gRPC server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### keepalive block
 

docs/sources/reference/components/otelcol.exporter.otlp.md

@@ -109,7 +109,7 @@ able to handle and proxy HTTP/2 traffic.
 The `tls` block configures TLS settings used for the connection to the gRPC
 server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 {{< admonition type="note" >}}
 `otelcol.exporter.otlp` uses gRPC, which does not allow you to send sensitive credentials (like `auth`) over insecure channels.

docs/sources/reference/components/otelcol.exporter.otlphttp.md

@@ -104,7 +104,7 @@ If `http2_read_idle_timeout` is unset or set to `0s`, then no health check will
 The `tls` block configures TLS settings used for the connection to the HTTP
 server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### sending_queue block
 

docs/sources/reference/components/otelcol.extension.jaeger_remote_sampling.md

@@ -45,7 +45,7 @@ grpc > keepalive > server_parameters  | [server_parameters][]  | Server paramete
 grpc > keepalive > enforcement_policy | [enforcement_policy][] | Enforcement policy for keepalive settings.                                       | no
 source                                | [source][]             | Configures the Jaeger remote sampling document.                                  | yes
 source > remote                       | [remote][]             | Configures the gRPC client used to retrieve the Jaeger remote sampling document. | no
-source > remote > tls                 | [tls][]                | Configures TLS for the gRPC client.                                              | no
+source > remote > tls                 | [tls_client][]                | Configures TLS for the gRPC client.                                              | no
 source > remote > keepalive           | [keepalive][]          | Configures keepalive settings for the gRPC client.                               | no
 
 The `>` symbol indicates deeper levels of nesting. For example, `grpc > tls`
@@ -80,7 +80,7 @@ Name                    | Type      | Description
 The `tls` block configures TLS settings used for a server. If the `tls` block
 isn't provided, TLS won't be used for connections to the server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-server-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### cors block
 
@@ -223,7 +223,7 @@ able to handle and proxy HTTP/2 traffic.
 The `tls` block configures TLS settings used for the connection to the gRPC
 server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### keepalive client block
 

docs/sources/reference/components/otelcol.processor.resourcedetection.md

@@ -676,7 +676,7 @@ Block                                                  | Description
 The `tls` block configures TLS settings used for the connection to the gRPC
 server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 #### openshift > resource_attributes
 

docs/sources/reference/components/otelcol.receiver.jaeger.md

@@ -110,7 +110,7 @@ Name | Type | Description | Default | Required
 The `tls` block configures TLS settings used for a server. If the `tls` block
 isn't provided, TLS won't be used for connections to the server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-server-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### keepalive block
 

docs/sources/reference/components/otelcol.receiver.kafka.md

@@ -165,7 +165,7 @@ The `tls` block configures TLS settings used for connecting to the Kafka
 brokers. If the `tls` block isn't provided, TLS won't be used for
 communication.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### kerberos block
 

docs/sources/reference/components/otelcol.receiver.opencensus.md

@@ -86,7 +86,7 @@ refers to a `tls` block defined inside a `grpc` block.
 The `tls` block configures TLS settings used for a server. If the `tls` block
 isn't provided, TLS won't be used for connections to the server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-server-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### keepalive block
 

docs/sources/reference/components/otelcol.receiver.otlp.md

@@ -89,7 +89,7 @@ Name | Type | Description | Default | Required
 The `tls` block configures TLS settings used for a server. If the `tls` block
 isn't provided, TLS won't be used for connections to the server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-server-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### keepalive block
 

docs/sources/reference/components/otelcol.receiver.vcenter.md

@@ -90,7 +90,7 @@ output | [output][] | Configures where to send received telemetry data. | yes
 The `tls` block configures TLS settings used for a server. If the `tls` block
 isn't provided, TLS won't be used for connections to the server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-client-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### metrics block
 

docs/sources/reference/components/otelcol.receiver.zipkin.md

@@ -66,7 +66,7 @@ refers to a `tls` block defined inside a `grpc` block.
 The `tls` block configures TLS settings used for a server. If the `tls` block
 isn't provided, TLS won't be used for connections to the server.
 
-{{< docs/shared lookup="reference/components/otelcol-tls-config-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
+{{< docs/shared lookup="reference/components/otelcol-tls-server-block.md" source="alloy" version="<ALLOY_VERSION>" >}}
 
 ### cors block
 

docs/sources/shared/reference/components/otelcol-tls-config-block.md → docs/sources/shared/reference/components/otelcol-tls-client-block.md

@@ -1,6 +1,6 @@
 ---
-canonical: https://grafana.com/docs/alloy/latest/shared/reference/components/otelcol-tls-config-block/
-description: Shared content, otelcol tls config block
+canonical: https://grafana.com/docs/alloy/latest/shared/reference/components/otelcol-tls-client-block/
+description: Shared content, otelcol tls client block
 headless: true
 ---
 

docs/sources/shared/reference/components/otelcol-tls-server-block.md

@@ -0,0 +1,39 @@
+---
+canonical: https://grafana.com/docs/alloy/latest/shared/reference/components/otelcol-tls-server-block/
+description: Shared content, otelcol tls server block
+headless: true
+---
+
+The following arguments are supported:
+
+Name                           | Type           | Description                                                                                  | Default     | Required
+-------------------------------|----------------|----------------------------------------------------------------------------------------------|-------------|---------
+`ca_file`                      | `string`       | Path to the CA file.                                                                         |             | no
+`ca_pem`                       | `string`       | CA PEM-encoded text to validate the server with.                                             |             | no
+`cert_file`                    | `string`       | Path to the TLS certificate.                                                                 |             | no
+`cert_pem`                     | `string`       | Certificate PEM-encoded text for client authentication.                                      |             | no
+`include_system_ca_certs_pool` | `boolean`      | Whether to load the system certificate authorities pool alongside the certificate authority. | `false`     | no
+`key_file`                     | `string`       | Path to the TLS certificate key.                                                             |             | no
+`key_pem`                      | `secret`       | Key PEM-encoded text for client authentication.                                              |             | no
+`max_version`                  | `string`       | Maximum acceptable TLS version for connections.                                              | `"TLS 1.3"` | no
+`min_version`                  | `string`       | Minimum acceptable TLS version for connections.                                              | `"TLS 1.2"` | no
+`cipher_suites`                | `list(string)` | A list of TLS cipher suites that the TLS transport can use.                                  | `[]`        | no
+`reload_interval`              | `duration`     | The duration after which the certificate is reloaded.                                        | `"0s"`      | no
+`client_ca_file`               | `string`       | Path to the TLS cert to use by the server to verify a client certificate.                    |             | no
+
+If `reload_interval` is set to `"0s"`, the certificate never reloaded.
+
+The following pairs of arguments are mutually exclusive and can't both be set simultaneously:
+
+* `ca_pem` and `ca_file`
+* `cert_pem` and `cert_file`
+* `key_pem` and `key_file`
+
+If `cipher_suites` is left blank, a safe default list is used.
+See the [Go Cipher Suites documentation][golang-cipher-suites] for a list of supported cipher suites.
+
+`client_ca_file` sets the `ClientCA` and `ClientAuth` to `RequireAndVerifyClientCert` in the `TLSConfig`. 
+See to the [Go TLS documentation][golang-tls] for more information.
+
+[golang-tls]: https://godoc.org/crypto/tls#Config
+[golang-cipher-suites]: https://go.dev/src/crypto/tls/cipher_suites.go