addition(3rd_party_board): Add Waveshare-S3-touch-lcd

variants/waveshare_esp32_s3_touch_lcd_4/pins_arduino.h

@@ -0,0 +1,73 @@
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+// BN: ESP32 Family Device
+#define USB_VID 0x303a
+#define USB_PID 0x823D 
+
+#define USB_MANUFACTURER "Waveshare"
+#define USB_PRODUCT      "ESP32-S3-Touch-LCD-4"
+#define USB_SERIAL       ""
+
+// UART0 pins
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// Def for I2C that shares the IMU I2C pins
+static const uint8_t SDA = -1;
+static const uint8_t SCL = -1;
+
+// Mapping based on the ESP32S3 data sheet - alternate for SPI2
+static const uint8_t SS = 34;    // FSPICS0
+static const uint8_t MOSI = 35;  // FSPID
+static const uint8_t MISO = 37;  // FSPIQ
+static const uint8_t SCK = 36;   // FSPICLK
+
+// Mapping based on the ESP32S3 data sheet - alternate for OUTPUT
+static const uint8_t OUTPUT_IO2 = 2;
+static const uint8_t OUTPUT_IO3 = 3;
+static const uint8_t OUTPUT_IO17 = 17;
+static const uint8_t OUTPUT_IO18 = 18;
+
+// Analog capable pins on the header
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+
+// GPIO capable pins on the header
+static const uint8_t D0 = 7;
+static const uint8_t D1 = 6;
+static const uint8_t D2 = 5;
+static const uint8_t D3 = 4;
+static const uint8_t D4 = 3;
+static const uint8_t D5 = 2;
+static const uint8_t D6 = 1;
+static const uint8_t D7 = 44;
+static const uint8_t D8 = 43;
+static const uint8_t D9 = 40;
+static const uint8_t D10 = 39;
+static const uint8_t D11 = 38;
+static const uint8_t D12 = 37;
+static const uint8_t D13 = 36;
+static const uint8_t D14 = 35;
+static const uint8_t D15 = 34;
+static const uint8_t D16 = 33;
+
+// Touch input capable pins on the header
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+
+#endif /* Pins_Arduino_h */

variants/waveshare_esp32_s3_touch_lcd_43/pins_arduino.h

@@ -0,0 +1,117 @@
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+// BN: ESP32 Family Device
+#define USB_VID 0x303a
+#define USB_PID 0x822E
+
+#define USB_MANUFACTURER "Waveshare"
+#define USB_PRODUCT      "ESP32-S3-Touch-LCD-4.3"
+#define USB_SERIAL       ""
+
+// display for ST7262
+#define WS_LCD_B3  14
+#define WS_LCD_B4  38
+#define WS_LCD_B5  18
+#define WS_LCD_B6  17
+#define WS_LCD_B7  10
+
+#define WS_LCD_G2  39
+#define WS_LCD_G3  0
+#define WS_LCD_G4  45
+#define WS_LCD_G5  48
+#define WS_LCD_G6  47
+#define WS_LCD_G7  21
+
+#define WS_LCD_R3  1
+#define WS_LCD_R4  2
+#define WS_LCD_R5  42
+#define WS_LCD_R6  41
+#define WS_LCD_R7  40
+
+#define WS_LCD_VSYNC  3
+#define WS_LCD_HSYNC  46
+#define WS_LCD_PCLK   7
+#define WS_LCD_DE     5
+
+// Touch for gt911
+#define WS_TP_SDA 8
+#define WS_TP_SCL 9
+#define WS_TP_RST -1
+#define WS_TP_INT 4
+
+//RS485
+#define WS_RS485_RXD 16
+#define WS_RS485_TXD 15
+
+//CAN
+#define WS_CAN_RXD 19
+#define WS_CAN_TXD 20
+
+//Onboard CH422G IO expander
+#define WS_CH422G_SDA 8
+#define WS_CH422G_SCL 9
+
+
+// UART0 pins
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// Def for I2C that shares the IMU I2C pins
+static const uint8_t SDA = 11;
+static const uint8_t SCL = 10;
+
+// Mapping based on the ESP32S3 data sheet - alternate for SPI2
+static const uint8_t SS = 34;    // FSPICS0
+static const uint8_t MOSI = 35;  // FSPID
+static const uint8_t MISO = 37;  // FSPIQ
+static const uint8_t SCK = 36;   // FSPICLK
+
+// Mapping based on the ESP32S3 data sheet - alternate for OUTPUT
+static const uint8_t OUTPUT_IO2 = 2;
+static const uint8_t OUTPUT_IO3 = 3;
+static const uint8_t OUTPUT_IO17 = 17;
+static const uint8_t OUTPUT_IO18 = 18;
+
+// Analog capable pins on the header
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+
+// GPIO capable pins on the header
+static const uint8_t D0 = 7;
+static const uint8_t D1 = 6;
+static const uint8_t D2 = 5;
+static const uint8_t D3 = 4;
+static const uint8_t D4 = 3;
+static const uint8_t D5 = 2;
+static const uint8_t D6 = 1;
+static const uint8_t D7 = 44;
+static const uint8_t D8 = 43;
+static const uint8_t D9 = 40;
+static const uint8_t D10 = 39;
+static const uint8_t D11 = 38;
+static const uint8_t D12 = 37;
+static const uint8_t D13 = 36;
+static const uint8_t D14 = 35;
+static const uint8_t D15 = 34;
+static const uint8_t D16 = 33;
+
+// Touch input capable pins on the header
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+
+#endif /* Pins_Arduino_h */

variants/waveshare_esp32_s3_touch_lcd_43b/pins_arduino.h

@@ -0,0 +1,117 @@
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+// BN: ESP32 Family Device
+#define USB_VID 0x303a
+#define USB_PID 0x8231
+
+#define USB_MANUFACTURER "Waveshare"
+#define USB_PRODUCT      "ESP32-S3-Touch-LCD-4.3B"
+#define USB_SERIAL       ""
+
+// display for ST7262
+#define WS_LCD_B3  14
+#define WS_LCD_B4  38
+#define WS_LCD_B5  18
+#define WS_LCD_B6  17
+#define WS_LCD_B7  10
+
+#define WS_LCD_G2  39
+#define WS_LCD_G3  0
+#define WS_LCD_G4  45
+#define WS_LCD_G5  48
+#define WS_LCD_G6  47
+#define WS_LCD_G7  21
+
+#define WS_LCD_R3  1
+#define WS_LCD_R4  2
+#define WS_LCD_R5  42
+#define WS_LCD_R6  41
+#define WS_LCD_R7  40
+
+#define WS_LCD_VSYNC  3
+#define WS_LCD_HSYNC  46
+#define WS_LCD_PCLK   7
+#define WS_LCD_DE     5
+
+// Touch for gt911
+#define WS_TP_SDA 8
+#define WS_TP_SCL 9
+#define WS_TP_RST -1
+#define WS_TP_INT 4
+
+//RS485
+#define WS_RS485_RXD 43
+#define WS_RS485_TXD 44
+
+//CAN
+#define WS_CAN_RXD 15
+#define WS_CAN_TXD 16
+
+//Onboard CH422G IO expander
+#define WS_CH422G_SDA 8
+#define WS_CH422G_SCL 9
+
+
+// UART0 pins
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// Def for I2C that shares the IMU I2C pins
+static const uint8_t SDA = 11;
+static const uint8_t SCL = 10;
+
+// Mapping based on the ESP32S3 data sheet - alternate for SPI2
+static const uint8_t SS = 34;    // FSPICS0
+static const uint8_t MOSI = 35;  // FSPID
+static const uint8_t MISO = 37;  // FSPIQ
+static const uint8_t SCK = 36;   // FSPICLK
+
+// Mapping based on the ESP32S3 data sheet - alternate for OUTPUT
+static const uint8_t OUTPUT_IO2 = 2;
+static const uint8_t OUTPUT_IO3 = 3;
+static const uint8_t OUTPUT_IO17 = 17;
+static const uint8_t OUTPUT_IO18 = 18;
+
+// Analog capable pins on the header
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+
+// GPIO capable pins on the header
+static const uint8_t D0 = 7;
+static const uint8_t D1 = 6;
+static const uint8_t D2 = 5;
+static const uint8_t D3 = 4;
+static const uint8_t D4 = 3;
+static const uint8_t D5 = 2;
+static const uint8_t D6 = 1;
+static const uint8_t D7 = 44;
+static const uint8_t D8 = 43;
+static const uint8_t D9 = 40;
+static const uint8_t D10 = 39;
+static const uint8_t D11 = 38;
+static const uint8_t D12 = 37;
+static const uint8_t D13 = 36;
+static const uint8_t D14 = 35;
+static const uint8_t D15 = 34;
+static const uint8_t D16 = 33;
+
+// Touch input capable pins on the header
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+
+#endif /* Pins_Arduino_h */