addition(3rd_party_board): Add Waveshare-S3-touch-lcd

[H-sw123]

Description of Change

Adding variant for Waveshare ESP32-S3-Touch-LCD-4 & ESP32-S3-Touch-LCD-4.3 & ESP32-S3-Touch-LCD-4.3B & ESP32-S3-Touch-LCD-5 & ESP32-S3-Touch-LCD-5B ESP32-S3-Touch-LCD-7 board

Tests scenarios

Untested, pin definition is based on information in Waveshare wiki.

Related links

Wiki for ESP32-S3-Touch-LCD-4
Wiki for ESP32-S3-Touch-LCD-4.3
Wiki for ESP32-S3-Touch-LCD-4.3B
Wiki for ESP32-S3-Touch-LCD-5
Wiki for ESP32-S3-Touch-LCD-5B
Wiki for ESP32-S3-Touch-LCD-7

[CLAassistant]

All committers have signed the CLA.

[github-actions]

Warnings

⚠️

Some issues found for the commit messages in this PR: the commit message "add waveshare_touch_lcd": summary looks empty type/action looks empty the commit message "waveshare_touch_lcd": summary looks empty type/action looks empty the commit message "waveshare_touch_lcd": summary looks empty type/action looks empty Please fix these commit messages - here are some basic tips: follow Conventional Commits style correct format of commit message should be: <type/action>(<scope/component>): <summary>, for example fix(esp32): Fixed startup timeout issue allowed types are: change,ci,docs,feat,fix,refactor,remove,revert,test sufficiently descriptive message summary should be between 20 to 72 characters and start with upper case letter avoid Jira references in commit messages (unavailable/irrelevant for our customers) TIP: Install pre-commit hooks and run this check when committing (uses the Conventional Precommit Linter).

	Messages
📖	You might consider squashing your 5 commits (simplifying branch history).
📖	This PR seems to be quite large (total lines of code: 1857), you might consider splitting it into smaller PRs

👋 Hello H-sw123, we appreciate your contribution to this project!

---

Click to see more instructions ...

This automated output is generated by the PR linter DangerJS, which checks if your Pull Request meets the project's requirements and helps you fix potential issues.

DangerJS is triggered with each push event to a Pull Request and modify the contents of this comment.

Please consider the following:
- Danger mainly focuses on the PR structure and formatting and can't understand the meaning behind your code or changes.
- Danger is not a substitute for human code reviews; it's still important to request a code review from your colleagues.
- Resolve all warnings (⚠️ ) before requesting a review from human reviewers - they will appreciate it.
- Addressing info messages (📖) is strongly recommended; they're less critical but valuable.
- To manually retry these Danger checks, please navigate to the Actions tab and re-run last Danger workflow.

Review and merge process you can expect ...

We do welcome contributions in the form of bug reports, feature requests and pull requests.

1. An internal issue has been created for the PR, we assign it to the relevant engineer.
2. They review the PR and either approve it or ask you for changes or clarifications.
3. Once the GitHub PR is approved we do the final review, collect approvals from core owners and make sure all the automated tests are passing.
- At this point we may do some adjustments to the proposed change, or extend it by adding tests or documentation.
4. If the change is approved and passes the tests it is merged into the default branch.

Generated by 🚫 dangerJS against f59cd63

[P-R-O-C-H-Y]

Hi @H-sw123, as the board comes with the 8MB flash size, please remove all 16MB partition schemes located in each board (fatflash, app3M_fat9M). Thanks

[H-sw123]

Hi, @P-R-O-C-H-Y I am a staff of waveshare. We plan to add a 16M module to our 8M product. I have added a statement in boards.txt that the flash can be selected as 8M or 16M.


Please keep the 16M partition.Thanks