Raspberry Pi

Blogpost - Blogpost repost at dev.to - Thanks at CNCF original issue - Twitter tweet - HN

Install Wekan for RasPi3 or RasPi4

Newest Wekan:

• Ubuntu 19.10 Server arm64 for RasPi3 and RasPi4
• MongoDB 3.6.x
• Newest Wekan with newest Meteor

1. Download Ubuntu 19.10 64bit Server for RasPi and write to SD Card

Download from: https://ubuntu.com/download/raspberry-pi

It seems that RasPi website recommends BalenaEtcher GUI for writing image to SD Card.

For Linux dd users, after unarchiving in file manager, if sd card is /dev/sdb, it's for example:

sudo su
dd if=ubuntu.img of=/dev/sdb conv=sync bs=40M status=progress
sync
exit

And wait for SD card light stop blinking, so it has written everything.

2. Preparing for booting RasPi

With RasPi, you need:

• Ubuntu SD card inserted to your RasPi.
• Ethernet cable connected to your router/modem/hub, with connection to Internet.
• USB keyboard and mouse connected.
• Monitor connected to HDMI. Or alternatively, look at your router webpage http://192.168.0.1 (or similar) what is your RasPi IP address, and ssh [email protected] with password ubuntu.
• Power cable.

Boot RasPi.

Username: ubuntu Password: ubuntu

This info is from https://wiki.ubuntu.com/ARM/RaspberryPi

It will ask you to change your password at first login.

3. Wait for updates to finish

After login, type:

top

When you see apt or dpkg, automatic updates are still running. Wait for updates to finish. Then press q to quit top.

4. Install remaining updates

sudo 

Wekan for RasPi3 arm64 and other CPU architectures

Newest Wekan:

• Ubuntu 19.10 Server arm64 for RasPi3 and RasPi4
• MongoDB 3.6.x
• Newest Wekan with newest Meteor

Note: Raspbian is not recommended, because it is 32bit and has 32bit MongoDB that has file size limit of 2 GB, if it grows bigger then it gets corrupted. That's why here is arm64 version of Ubuntu 18.04.

To test RasPi3, xet7 tested it with all his Wekan boards data:

mongorestore --drop

If there is errors in restoring, try:

mongorestore --drop --noIndexRestore

When using Firefox on network laptop (Core 2 Duo laptop, 8 GB RAM, SSD harddisk) to browse RasPi Wekan server, small boards load at about 3 seconds at first time. When loading, node CPU usage goes to about 100%. MongoDB CPU usage stays low, sometimes goes to 18%. This is because indexes has been added to Wekan MongoDB database. Loading my biggest Wekan board at first time takes 45 seconds, and next time takes about 2 seconds, because data is at browser cache. When Wekan browser tab is closed, node CPU usage drops 4-23%. There is no errors given by Wekan at RasPi3, RasPi3 arm64 behaves similar to x64 server that has 1 GB RAM.

I did also test Wekan arm64 on arm64 bare metal server, same Wekan bundle worked there.

Old info below

.7z size 876 MB, unarchived RasPi3 .img size of 4.5 GB. At first boot disk image expands to full SD card size.

https://releases.wekan.team/raspi3/wekan-2.94-raspi3-ubuntu18.04server.img.7z

Or alternatively Wekan Meteor 1.8.1 bundle for arm64:

https://releases.wekan.team/raspi3/wekan-2.94-arm64-bundle.tar.gz

How to use .img

1. Write image to SD card

sudo apt-get install p7zip-full
7z x wekan-2.94-raspi3-ubuntu18.04server.img.7z
sudo dd if=wekan-2.94-raspi3-ubuntu18.04server.img of=/dev/mmcblk0 conv=sync status=progress bs=100M

2. Login for Wekan files

• Username wekan
• Password wekan (for Wekan files)

(Or for ubuntu user: username ubuntu password ubuntuubuntu)

3. After login as wekan user, check IP address with command:

ip address

4. Change that IP addess to start-wekan.sh:

cd repos
nano start-wekan.sh

There change ROOT_URL to have your IP address. Save and Exit: Ctrl-o Enter Ctrl-x Enter

5. Restore your Wekan dump subdirectory

mongorestore --drop --noIndexRestore

6. Start Wekan:

./start-wekan.sh

And maybe run as service

Or start at boot, by having at bottom of /etc/rc.local.

7. On other computer, with webbrowser go to http://192.168.0.12 (or other of your IP address you changed to start-wekan.sh)

How to use bundle

a) On any Ubuntu 18.04 arm64 server

wget https://releases.wekan.team/raspi3/wekan-2.94-arm64-bundle.tar.gz
tar -xzf wekan-2.94-arm64-bundle.tar.gz
sudo apt-get install build-essential curl make nodejs npm mongodb-clients mongodb-server
sudo npm -g install npm
sudo npm -g install n
sudo n 8.16.0
sudo systemctl start mongodb
sudo systemctl enable mongodb
wget https://releases.wekan.team/raspi3/start-wekan.sh
nano start-wekan.sh

There edit ROOT_URL to have your IP address or domain, and PORT for your localhost port.

You can also allow node to run on port 80, when you check where node is:

which node

and then allow it:

sudo setcap cap_net_bind_service=+ep /usr/local/bin/node

Adding users

Upgrade bundle

Stop Wekan. See what is newest bundle version at https://releases.wekan.team .

Then, for example:

cd ~/repos
rm -rf bundle
wget https://releases.wekan.team/wekan-3.01.zip
unzip wekan-3.01.zip
cd bundle/programs/server
npm install
npm install node-gyp node-pre-gyp fibers    (maybe not needed)
cd ../../..

Then Start Wekan.

b) Other CPU architectures

Do as above, but then also install node packages for your architecture:

cd bundle/programs/server
npm install
npm install node-gyp node-pre-gyp fibers
cd ../../..

Then start Wekan

./start-wekan.sh

c) Even more something?

Well, you could get some other newest Meteor x64 bundle, like RocketChat, and this way make it run on your CPU architecture, that has required Node+NPM+MongoDB.

How this was done

1. Bundle at https://releases.wekan.team/raspi3/ was created this way originally on Xubuntu 19.10 x64. This is because officially Meteor only supports x32 and x64. One workaround would be to add patch to allow other architecture, like this. But better workaround is to just build bundle on x64 and then on other architectures download bundle and reinstall npm packages.

git clone https://github.com/wekan/wekan
cd wekan
git checkout meteor-1.8
./rebuild-wekan.sh
# 1 and Enter to install deps
./rebuild-wekan.sh
# 2 and Enter to build Wekan
cd .build

Then create tar.gz that included bundle directory, with name wekan-VERSION.tar.gz

Ready-made bundles of Meteor 1.6 Wekan x64 at https://releases.wekan.team

Ready-made bundle of Meteor 1.8 Wekan for arm64 at https://releases.wekan.team , works at RasPi3, and any other arm64 server that has Ubuntu 18.04 arm64.

2. Ubuntu Server for RasPi3 from https://www.raspberrypi.org/downloads/

Write to SD card.

Boot:

• Username ubuntu
• Password ubuntu
• It asks to change password at first boot.

3. Create new user:

sudo adduser wekan

Add name wekan, password wekan, and then other empty with Enter, and accept with Y.

4. Add passwordless sudo:

export EDITOR=nano
sudo visudo

There below root add:

wekan  ALL=(ALL:ALL) NOPASSWD:ALL

Save and Exit: Ctrl-o Enter Ctrl-x Enter

5. Logout, and login

• Username wekan
• Password wekan

6. Download bundle etc

See above about downloading bundle, start-wekan.sh, dependencies etc.

7. Shutdown RasPi3

sudo shutdown -h now

8. At computer, insert SD card and unmount partitions:

sudo umount /dev/mmcblk0p1 /dev/mmcblk0p2

9. Read SD card to image

sudo dd if=/dev/mmcblk0 of=wekan-2.94-raspi3-ubuntu18.04server.img conv=sync status=progress

10. Resize image to smaller from 32 GB to 4.5 GB:

Resize script is originally from here.

wget https://releases.wekan.team/raspi3/resize.sh
chmod +x resize.sh
sudo ./resize.sh wekan-2.94-raspi3-ubuntu18.04server.img

11. Make .7z archive to pack about 4.5 GB to about 800 MB:

7z a wekan-2.94-raspi3-ubuntu18.04server.img.7z wekan-2.94-raspi3-ubuntu18.04server.img