Skip to content

Issues: MEGA65/megaphone-r4-pcb

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

42 Open 38 Closed
42 Open 38 Closed
Author
Filter by author
Loading
Label
Filter by label
Loading
Use alt + click/return to exclude labels
or ⇧ + click/return for logical OR
Projects
Filter by project
Loading
Milestones
Filter by milestone
Loading
Assignee
Filter by who’s assigned
Sort
Sort by
Newest Oldest Most commented Least commented Recently updated Least recently updated Best match
Most reactions
👍 👎 😄 🎉 😕 ❤️ 🚀 👀

Issues list

SIM SD card pins are shorted on schematics
#84 opened Jan 19, 2023 by goran-mahovlic
SIM/SDCARD footprint is wrong
#83 opened Sep 20, 2022 by goran-mahovlic
Move EN_MIC from gpio_0 of OrangeCrab to P17 (pin 20) of U14
#82 opened Sep 18, 2022 by gardners
VCC_MIC is used to supply 5V to various other things, like joystick and HDMI ports
#81 opened Sep 18, 2022 by gardners
1
Rename SDATA_amp to i2s_speaker in schematic
#80 opened Sep 17, 2022 by gardners
LCD_RED[5] pin should be P5, not R5 in the schematic
#79 opened Sep 17, 2022 by gardners
No connections from FPGA to bluetooth audio
#78 opened Sep 17, 2022 by gardners
LCD Backlight sits on 2.65V when VCC_SCREEN is off
#77 opened Sep 17, 2022 by gardners
/INT line should be connected to Xilinx FPGA
#76 opened Sep 17, 2022 by gardners
Indicator LEDs can leak current between them
#75 opened Sep 7, 2022 by gardners
IO expanders are powered from VCC_FPGA, which can be shut down
#74 opened Sep 3, 2022 by gardners
1
PCA9535 pin 3 is labeled "reset" but datasheet says it is "A2"
#73 opened Sep 3, 2022 by gardners
Replace CN3791 with CN3801
#72 opened Sep 3, 2022 by gardners
Resistive touch pins are not connected - they should be connected to LCD connector.
#71 opened Aug 22, 2022 by goran-mahovlic
We will need holes for holders of wifi/lora boards.
#70 opened Aug 22, 2022 by goran-mahovlic
OrangeCrab needs low profile connectors
#69 opened Aug 22, 2022 by goran-mahovlic
Q3 and Q4 did slip in oven
#68 opened Aug 22, 2022 by goran-mahovlic
Parts unification
#67 opened Aug 22, 2022 by goran-mahovlic
Part marking on silkscreen should be fixed - they are all over the place.
#66 opened Aug 22, 2022 by goran-mahovlic
Marking power supply input wold be usefull
#65 opened Aug 22, 2022 by goran-mahovlic
Main I2C SDA and SCL lines are currently connected with wires to Orangecrab
#63 opened Aug 22, 2022 by goran-mahovlic
3
Touch screen hole on PCB was not cutted by JLCPCB
#62 opened Aug 22, 2022 by goran-mahovlic
Would be usefull to add marked testing points for the signals and voltages
#61 opened Aug 22, 2022 by goran-mahovlic
Q3 - if placed CN3791 does not know how charged battery is
#60 opened Aug 22, 2022 by goran-mahovlic
1
On powersupply input schematics V_Bat and BAT are not connected
#59 opened Aug 22, 2022 by goran-mahovlic
ProTip! Add no:assignee to see everything that’s not assigned.