Skip to content

How to update firmware version

Alex Cazorla Solà edited this page Feb 8, 2019 · 13 revisions

If a message like the one shown below appears after connecting your BonadroneFC to the platform, it means that you must update your firmware version.

New version available

In order to update the flight controller firmware to the latest version you should follow the steps listed below:

  1. Disconnect the FC from Bonadrone's platform and unplug the USB cable from the PC
  2. If the FC is also being powered with a battery, disconnect the battery from the FC
  3. Maintain pressed the FC button labeled as "BTN"
  4. Connect via USB the FC to Bonadrone's platform
  5. Go to "Firmware" section and select your Mosquito version and if your drone has the position board included.
  6. Press the button "Load Firmware" and wait.

New version available

Clone this wiki locally