Releases: Amersel/coreboot
Optiplex 9030 AIO v4.17 Release 2
Second release for the Optiplex 9030. Fixes the fan control.
Note: I do not have this machine. This was compiled and tested by @jasonmerc.
Built using SMSC555x sources. Boots Linux Mint 20.3 Kernel 5.4.
Tested working:
- Intel i7-4785T
- 2x 4Gb SODIMM DDR3 1600mhz
- Audio
- Linux Mint 20.3 Kernel 5.4
- SSD
- DVD Drive
- Boot LED
- Ethernet
- S3 Resume
- Internal Display
- USB ports
- Intel wifi card
- Internal flashing with flashrom
- Fan control
Not working:
- TPM 1.2
Untested:
- 2nd NGFF slot
- Camera
Contributors
Assets 3
Optiplex 9030 AIO v4.17
First release for the Optiplex 9030 AIO.
Built using SMSC555x sources. Boots Linux Mint 20.3 Kernel 5.4.
Tested working:
- SeaBIOS
- Intel i7-4785T
- 2x 4Gb SODIMM DDR3 1600mhz
- Audio
- Linux Mint 20.3 Kernel 5.4
- SSD
- DVD Drive
- Boot LED
- Ethernet
- S3 Resume
- Internal Display
- USB ports
- Intel wifi card
Not working:
- Fan control
- TPM 1.2
- Tianocore
Untested:
- Internal flashing with flashrom
- 2nd NGFF slot
- Camera
W541 updated to 4.13 (master)
Updated with the latest coreboot master branch changes.
Known Issues
- Booting from a full shutdown takes ~30 sec
- According to the timestamps, this is due to memory initialization
- mSATA SSDs aren't working
- dGPU doesn't work in Windows
Build 11/14/2020
This is an image of a build I did all the way back in November. I haven't done anything new with these builds lately, but they did fix a few critical issues. In particular, I fixed the headphone jack (with big help from irudog on the IRQ locations in the vendor firmware).
Changes
- Add support for nvram options
- Fix headphone jack audio (props to irudog)
Known Issues
- Booting from a full shutdown takes ~30 sec
- This appears to be the fault of mrc.bin, the memory initialization code
- mSATA SSDs aren't working
- dGPU doesn't work in Windows
Booting W541 build with graphics and ethernet
v4.12-2-w541 mainboard/lenovo/w541/Kconfig: add MAINBOARD_USES_IFD_GBE_REGION to e…
Demo W541 image
Partially working W541 build. Only generates logs and already contains some.
Logs are located here: https://pastebin.com/dVe5XCwG.
Changes from lemenkov's repo:
- Remove one printk line preventing coreboot from going further.
Booting W541 build
First booting build for my W541. It boots through SeaBIOS and can successfully boot Xubuntu 18.04 on an SSD.