Auto mode example

examples/PestoLink_ArcadeBot/NoU2_ArcadeAutoBot.ino

@@ -0,0 +1,102 @@
+#include <PestoLink-Receive.h>
+#include <Alfredo_NoU2.h>
+
+// If your robot has more than a drivetrain and one servo, add those actuators here 
+NoU_Motor frontLeftMotor(1);
+NoU_Motor frontRightMotor(2);
+NoU_Motor rearLeftMotor(3);
+NoU_Motor rearRightMotor(4);
+NoU_Servo servo(1);
+
+// This creates the drivetrain object, you shouldn't have to mess with this
+NoU_Drivetrain drivetrain(&frontLeftMotor, &frontRightMotor, &rearLeftMotor, &rearRightMotor);
+
+// This lets us easily keep track of whether the robot is in auto mode or not.
+// Experiment with adding more modes!
+enum State { MANUAL, AUTO };
+
+// These are the buttons we look for.
+int AUTO_START_BUTTON = 1;
+int AUTO_CANCEL_BUTTON = 2;
+
+// This stores the time at which we started auto mode. This lets us keep track of how long we've been in auto mode for.
+long AUTO_START_TIME = 0;
+State ROBOT_STATE;
+
+void setup() {
+	//EVERYONE SHOULD CHANGE "ESP32 Bluetooth" TO THE NAME OF THEIR ROBOT
+	PestoLink.begin("ESP32 Bluetooth");
+
+	// If a motor in your drivetrain is spinning the wrong way, change the value for it here from 'false' to 'true'
+    frontLeftMotor.setInverted(false);
+    frontRightMotor.setInverted(false);
+    rearLeftMotor.setInverted(false);
+    rearRightMotor.setInverted(false);
+
+	// No need to mess with this code
+    RSL::initialize();
+    RSL::setState(RSL_ENABLED);
+    ROBOT_STATE = MANUAL;
+}
+
+void loop() {
+	// Here we define the variables we use in the loop
+    int throttle = 0;
+    int rotation = 0;
+    int servoAngle = 0;
+
+	//When PestoLink.update() is called, it returns "true" only if the robot is connected to phone/laptop  
+    if (PestoLink.update()) {
+      if (ROBOT_STATE == MANUAL) {
+        // We only want to check manual controls if we're in manual mode!
+          if (PestoLink.buttonHeld(AUTO_START_BUTTON)) {
+            // If the auto mode button is pressed, we should switch to auto mode.
+            ROBOT_STATE = AUTO;
+            AUTO_START_TIME = millis();
+            return; // We don't want to check the manual controls - we just switched to auto mode! This immediately restarts the loop.
+          }
+          float throttle = -PestoLink.getAxis(1);
+          float rotation = PestoLink.getAxis(0);
+
+          drivetrain.arcadeDrive(throttle, rotation);
+
+      // Here we decide what the servo angle will be based on if a button is pressed ()
+      if (PestoLink.buttonHeld(0)) {
+        servoAngle = 50;
+      }
+      else {
+        servoAngle = 110;
+      }
+
+      // Here we set the drivetrain motor speeds and servo angle based on what we found in the above code
+      servo.write(servoAngle);
+      }
+      else {
+        // We're in auto mode, so we should handle auto mode.
+        if (PestoLink.update()) {
+          if (PestoLink.buttonHeld(AUTO_CANCEL_BUTTON)) {
+            // Check to see if we should cancel auto mode.
+            ROBOT_STATE = MANUAL;
+            return;
+          }
+        }
+        // If it's been less than one second (or, 1000 milliseconds) since we started auto mode, drive forwards.
+        if ((millis() - AUTO_START_TIME) < 1000) {
+          drivetrain.arcadeDrive(-1, 0);
+        }
+        // Otherwise, stop and exit auto mode.
+        else {
+          drivetrain.arcadeDrive(0,0);
+          ROBOT_STATE = MANUAL;
+          return;
+        }
+      }
+
+        RSL::setState(RSL_ENABLED);
+    } else {
+        RSL::setState(RSL_DISABLED);
+    }
+
+	// No need to mess with this code
+    RSL::update();
+}