Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

feat(config): add Shelly Wave 1PM #6280

Merged
merged 3 commits into from
Sep 21, 2023
Merged

feat(config): add Shelly Wave 1PM #6280

Changes from 2 commits
Commits
Show all changes
3 commits
Select commit Hold shift + click to select a range
bdc916b
feat(config): import config files from zwa
zwave-js-bot Sep 13, 2023
d827296
fix(config): clean up auto-import for Shelly Wave 1PM (#6289)
QubinoHelp Sep 21, 2023
2c5f58e
fix: remove unnecessary description
AlCalzone Sep 21, 2023
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
284 changes: 284 additions & 0 deletions packages/config/config/devices/0x0460/qnsw-001P16.json
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,284 @@
{
"manufacturer": "Shelly",
"manufacturerId": "0x0460",
"label": "QNSW-001P16",
"description": "Wave 1PM",
"devices": [
{
"productType": "0x0002",
"productId": "0x0084"
}
],
"firmwareVersion": {
"min": "0.0",
"max": "255.255"
},
"associations": {
"1": {
"label": "Lifeline",
"maxNodes": 9,
"isLifeline": true
},
"2": {
"label": "I1: On/Off",
"maxNodes": 9
},
"3": {
"label": "I1: Start/Stop Level Change",
"maxNodes": 9
}
},
"paramInformation": [
{
"#": "1",
"label": "SW1 Switch Type",
"description": "This parameter defines how the Device should treat the switch (which type) connected to the SW (SW1) terminal.",
"valueSize": 1,
"minValue": 0,
"maxValue": 2,
"defaultValue": 2,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "Momentary switch",
"value": 0
},
{
"label": "Toggle switch (follow switch)",
"value": 1
},
{
"label": "Toggle switch (change on toggle)",
"value": 2
}
]
},
{
"#": "17",
"$import": "~/templates/master_template.json#state_after_power_failure_prev_off",
"label": "O1: State After Power Failure"
},
{
"#": "19",
"label": "O1: Auto-Off Timer",
"valueSize": 2,
"minValue": 0,
"maxValue": 32535,
"defaultValue": 0,
"unsigned": true
},
{
"#": "20",
"label": "O1: Auto-On Timer",
"valueSize": 2,
"minValue": 0,
"maxValue": 32535,
"defaultValue": 0,
"unsigned": true
},
{
"#": "25",
"label": "O1: Auto-On/Off Timer Unit",
"valueSize": 1,
"minValue": 0,
"maxValue": 1,
"defaultValue": 0,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "Seconds",
"value": 0
},
{
"label": "10 ms",
"value": 1
}
]
},
{
"#": "23",
"label": "O1: Relay Type",
"valueSize": 1,
"minValue": 0,
"maxValue": 1,
"defaultValue": 0,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "Normally open (NO)",
"value": 0
},
{
"label": "Normally closed (NC)",
"value": 1
}
]
},
{
"#": "36",
"label": "O1: Power Change Report Threshold",
"valueSize": 1,
"unit": "%",
"minValue": 0,
"maxValue": 100,
"defaultValue": 50,
"unsigned": true
},
{
"#": "39",
"label": "O1: Minimum Time Between Power Reports",
"valueSize": 1,
"unit": "seconds",
"minValue": 0,
"maxValue": 120,
"defaultValue": 30,
"unsigned": true
},
{
"#": "91",
"label": "Alarm Configuration: Water",
"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.",
"valueSize": 4,
"defaultValue": 0,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "No action",
"value": 0
},
{
"label": "Open relay",
"value": 1
},
{
"label": "Close relay",
"value": 2
}
]
},
{
"#": "92",
"label": "Alarm Configuration: Smoke",
"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.0",
"valueSize": 4,
"defaultValue": 0,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "No action",
"value": 0
},
{
"label": "Open relay",
"value": 1
},
{
"label": "Close relay",
"value": 2
}
]
},
{
"#": "93",
"label": "Alarm Configuration: CO",
"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.",
"valueSize": 4,
"defaultValue": 0,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "No action",
"value": 0
},
{
"label": "Open relay",
"value": 1
},
{
"label": "Close relay",
"value": 2
}
]
},
{
"#": "94",
"label": "Alarm Configuration: Heat",
"description": "This parameter determines which alarm frames the Device should respond to and how. The parameters consist of 4 bytes, the three most significant bytes are set according to the official Z-Wave protocol specification.",
"valueSize": 4,
"defaultValue": 0,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "No action",
"value": 0
},
{
"label": "Open relay",
"value": 1
},
{
"label": "Close relay",
"value": 2
}
]
},
{
"#": "120",
"label": "Factory Reset",
"description": "Reset to factory default settings and remove from the Z-Wave network.",
"valueSize": 4,
"defaultValue": 0,
"unsigned": true,
"allowManualEntry": false,
"options": [
{
"label": "Idle",
"value": 0
},
{
"label": "Factory reset",
"value": 1431655765
}
]
},
{
"#": "201",
"label": "Serial Number: Part 1",
"valueSize": 4,
"minValue": 0,
"maxValue": 2147483647,
"unsigned": true,
"readOnly": true
},
{
"#": "202",
"label": "Serial Number: Part 2",
"valueSize": 4,
"minValue": 0,
"maxValue": 2147483647,
"unsigned": true,
"readOnly": true
},
{
"#": "203",
"label": "Serial Number: Part 3",
"valueSize": 4,
"minValue": 0,
"maxValue": 2147483647,
"unsigned": true,
"readOnly": true
}
],
"metadata": {
"inclusion": "6.1 Adding the Device to a Z-Wave™ network (inclusion)\nNote! All Device outputs (O, O1, O2, etc. - depending on the Device type) will turn the load 1s on/1s off /1s on/1s off if the Device is successfully added to/removed from a Z-Wave™ network.\n\n6.1.1 SmartStart adding (inclusion)\nSmartStart enabled products can be added into a Z-Wave™ network by scanning the Z-Wave™ QR Code present on the Device with a gateway providing SmartStart inclusion. No further action is required, and the SmartStart device will be added automatically within 10 minutes of being switched on in the network vicinity.\n1. With the gateway application scan the QR code on the Device label and add the Security 2 (S2) Device Specific Key (DSK) to the provisioning list in the gateway.\n2. Connect the Device to a power supply.\n3. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave™ network.\n4. Adding will be initiated automatically within a few seconds after connecting the Device to a power supply, and the Device will be added to a Z-Wave™ network automatically.\n5. The blue LED will be blinking in Mode 2 during the adding process.\n6. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave™ network.\n\n6.1.2 Adding (inclusion) with a switch/push-button\n1. Connect the Device to a power supply.\n2. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave™ network.\n3. Enable add/remove mode on the gateway.\n4. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2, etc.) 3 times within 3 seconds (this procedure puts the Device in Learn mode*). The Device must receive on/off signal 3 times, which means pressing the momentary switch 3 times, or toggling the switch on and off 3 times.\n5. The blue LED will be blinking in Mode 2 during the adding process.\n6. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave™ network.\n*Learn mode - a state that allows the Device to receive network information from the gateway.\n\n6.1.3 Adding (inclusion) with the S button\n1. Connect the Device to a power supply.\n2. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave™ network.\n3. Enable add/remove mode on the gateway.\n4. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.\n5. Quickly release and then press and hold (> 2s) the S button on the Device until the blue LED starts blinking in Mode 3. Releasing the S button will start the Learn mode.\n6. The blue LED will be blinking in Mode 2 during the adding process.\n7. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave™ network.\nNote! In Setting mode, the Device has a timeout of 10s before entering again into Normal mode",
"exclusion": "Removing the Device from a Z-Wave™ network (exclusion)\nNote! The Device will be removed from your Z-wave™ network, but any custom configuration parameters will not be erased.\nNote! All Device outputs (O, O1, O2, etc. - depending on the Device type) will turn the load 1s on/1s off /1s on/1s off if the Device is successfully added to/removed from a Z-Wave™ network.\n\n6.2.1 Removing (exclusion) with a switch/push-button\n1. Connect the Device to a power supply.\n2. Check if the green LED is blinking in Mode 1. If so, the Device is added to a Z-Wave™ network.\n3. Enable add/remove mode on the gateway.\n4. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2,…) 3 times within 3 seconds (this procedure puts the Device in Learn mode). The Device must receive on/off signal 3 times, which means pressing the momentary switch 3 times, or toggling the switch on and off 3 times.\n5. The blue LED will be blinking in Mode 2 during the removing process.\n6. The blue LED will be blinking in Mode 1 if the Device is successfully removed from a Z-Wave™ network.\n\n6.2.2 Removing (exclusion) with the S button\n1. Connect the Device to a power supply.\n2. Check if the green LED is blinking in Mode 1. If so, the Device is added to a Z-Wave™ network.\n3. Enable add/remove mode on the gateway.\n4. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.\n5. Quickly release and then press and hold (> 2s) the S button on the Device until the blue LED starts blinking in Mode 3. Releasing the S button will start the Learn mode.\n6. The blue LED will be blinking in Mode 2 during the removing process.\n7. The blue LED will be blinking in Mode 1 if the Device is successfully removed from a Z-Wave™ network.\nNote! In Setting mode, the Device has a timeout of 10s before entering again into Normal mode",
"reset": "6.3 Factory reset\n6.3.1 Factory reset general\nAfter Factory reset, all custom parameters and stored values (kWh, associations, routings, etc.) will return to their default state. HOME ID and NODE ID assigned to the Device will be deleted. Use this reset procedure only when the gateway is missing or otherwise inoperable.\n\n6.3.2 Factory reset with a switch/push-button\nNote! Factory reset with a switch/push-button is only possible within the first minute after the Device is connected to a power supply.\n1. Connect the Device to a power supply.\n2. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2,…) 5 times within 3 seconds. The Device must receive on/off signal 5 times, which means pressing the push-button 5 times, or toggling the switch on and off 5 times.\n3. During factory reset, the LED will turn solid green for about 1s, then the blue and red LED will start blinking in Mode 3 for approx. 2s.\n4. The blue LED will be blinking in Mode 1 if the Factory reset is successful.\n\n6.3.3 Factory reset with the S button\nNote! Factory reset with the S button is possible anytime.\n1. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.\n2. Press the S button multiple times until the LED turns solid red.\n3. Press and hold (> 2s) S button on the Device until the red LED starts blinking in Mode 3. Releasing the S button will start the factory reset.\n4. During factory reset, the LED will turn solid green for about 1s, then the blue and red LED will start blinking in Mode 3 for approx. 2s.\n5. The blue LED will be blinking in Mode 1 if the Factory reset is successful.\n\n6.3.4 Remote factory reset with parameter with the gateway\nFactory reset can be done remotely with the settings in Parameter No. 120"
}
}
Loading