Update yale_template.json

packages/config/config/devices/0x0129/templates/yale_template.json

@@ -580,6 +580,5 @@
 		"classic_exclusion": "Classic Exclusion:\n1. On your lock keypad, enter your master entry code followed by the gear icon\n2. Press the 7 key followed by the gear icon\n3. Press the 3 key followed by the gear icon\n4. Open the Z-Wave system's smart home or alarm app and follow the instructions for removing a device\n5. Remove the Yale Smart Module from the slot above the battery compartment\nIMPORTANT: The batteries must be removed before removing the Yale Smart Module:\n• Remove battery cover\n• Remove batteries\n• Insert or remove Yale Smart Module\n• Reinstall batteries\n• Reinstall battery cover\n6. If you're adding a new Yale Smart Module, follow the instructions included with it.",
 		"wake_up_procedure": "Wake-Up Procedure: Press any key",
 		"reset": "When lock is reset to factory defaults, all Entry Codes (including the Master Entry Code*) are deleted, and all programming features are reset to original default settings (see below). \n1. Remove battery cover and batteries. \n2. Remove inside lock to access reset button. \n3. Reset button (see image at right) is located beside cable adapter. \n4. While pressing reset button, reinstall batteries. Hold reset button for a minimum of 3 seconds, then release. \n5. Replace battery cover. After reset, Master Entry Code creation is the only option available and must be performed prior to any other programming of the lock."
-
 	}
 }