fix(mpc.param.yaml) change enable_path_smoothing to false

Signed-off-by: shtokuda <[email protected]>

autoware_launch/config/control/trajectory_follower/1/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/10/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/2/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/3/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/4/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/5/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/6/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/7/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/8/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/9/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/awsim_jpt/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)

autoware_launch/config/control/trajectory_follower/default/lateral/mpc.param.yaml

@@ -7,7 +7,7 @@
     admissible_yaw_error_rad: 1.57  # stop mpc calculation when error is larger than the following value
 
     # -- path smoothing --
-    enable_path_smoothing: true    # flag for path smoothing
+    enable_path_smoothing: false    # flag for path smoothing
     path_filter_moving_ave_num: 25 # param of moving average filter for path smoothing
     curvature_smoothing_num_traj: 15        # point-to-point index distance used in curvature calculation (for trajectory): curvature is calculated from three points p(i-num), p(i), p(i+num)
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)