Merge/sound upstream 20241016 #5206
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Added proper error handling for register value check that return -EPERM when register value does not meet expected condition Signed-off-by: Zhu Jun <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Fix issue of warning messages caused by some variables. Signed-off-by: Jack Yu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
… print Printing the word `index` does not give extra information over printing: `Pin #%d` which tells that the format line is for a specific pin. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…audio_fmt() We have local copies of available_fmt->input_pin_fmts and available_fmt->num_input_formats, use them in the function. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…ut_audio_fmt() At label in_fmt the if (pin_fmts_size && i < pin_fmts_size) is guarantied to be true all the time, drop the check completely. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…t_input_audio_fmt() Print out the information line for the found input format once to avoid duplicated prints in case when multiple formats are available. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…_audio_fmt() Use local variables for available_fmt->output_pin_fmts and available_fmt->num_output_formats similarly to the input format selection to make the two functions easier to understand and help with readability. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…without output Process modules are allowed to have zero outputs, thus zero output formats. In this case there is no need for complicated if expressions to handle such cases, we can just use a single if for the number of output formats and the rest can be simplified. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…output_audio_fmt() Similarly to sof_ipc4_init_input_audio_fmt(), move all output format selection related prints (success or failure) inside of the sof_ipc4_init_output_audio_fmt() function. To do this, we need to pass swidget also, like with the input counterpart. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…n/out audio format Introduce a helper function to print out the audio format(s) used by a module in a consistent way. The printed text depends on the module format configuration, taking into account if they have both input and output support, the format is changed by the module and the number of formats supported on input/output. For example, if a module does not change format, there is no point of printing both in and out format, it is adequate to just state the format the module is using. While the function to generate the print is fairly complex (but not too much), it will create a cleaner experience on the reader side by handling the filtering of the information and present it in a way that it - I hope - makes the developer's live a bit more easier when tracking format changes. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
The current implementation does not work for widgets of DAPMs without component, as snd_soc_dapm_to_component() requires it. If the widget is directly owned by the card, e.g. as it is the case for the tegra implementation, the call leads to UB. Therefore directly access the component of the widget's DAPM to be able to check if a component is available. Fixes: f82eb06 ("ASoC: tegra: machine: Handle component name prefix") Cc: [email protected] # v6.7+ Signed-off-by: Benjamin Bara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Add DT bindings documentation for the Everest-semi ES8323 codec. Everest-semi ES8323 codec is a low-power mono audio codec with I2S audio interface and I2C control. Signed-off-by: Binbin Zhou <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Link: https://patch.msgid.link/414f829342a7b0f9d02a291eb9fd355cbef50005.1728459624.git.zhoubinbin@loongson.cn Signed-off-by: Mark Brown <[email protected]>
Add a codec driver for the Everest ES8323. It supports two separate audio outputs and two separate audio inputs. Signed-off-by: Binbin Zhou <[email protected]> Link: https://patch.msgid.link/135b19b06d19f34af8a0419bd3782ce5b8779870.1728459624.git.zhoubinbin@loongson.cn Signed-off-by: Mark Brown <[email protected]>
Add NXP uda1342 CODEC binding with DT schema format using json-schema. Signed-off-by: Binbin Zhou <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/d75045f8051d6e7a2a711c86a52a7c0a43775d08.1728459624.git.zhoubinbin@loongson.cn Signed-off-by: Mark Brown <[email protected]>
The UDA1342 is an NXP audio codec, support 2x Stereo audio ADC (4x PGA mic inputs), stereo audio DAC, with basic audio processing. Signed-off-by: Binbin Zhou <[email protected]> Link: https://patch.msgid.link/927e46b48ca84865a216ce08e7c53df59c2a8c0b.1728459624.git.zhoubinbin@loongson.cn Signed-off-by: Mark Brown <[email protected]>
Add Loongson I2S controller binding with DT schema format using json-schema. Signed-off-by: Binbin Zhou <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://patch.msgid.link/91e49509f1aaa70e635b6662ed9fffaf31165799.1728459624.git.zhoubinbin@loongson.cn Signed-off-by: Mark Brown <[email protected]>
The Loongson I2S controller exists not only in PCI form (LS7A bridge chip), but also in platform device form (Loongson-2K1000 SoC). This patch adds support for platform device I2S controller. Signed-off-by: Binbin Zhou <[email protected]> Link: https://patch.msgid.link/36c143358c7f48bc2e73c30e1d2009b2f2fc6498.1728459624.git.zhoubinbin@loongson.cn Signed-off-by: Mark Brown <[email protected]>
Merge series from Peter Ujfalusi <[email protected]>: When the audio started we print out here and there the Input and Output or only the Input audio format for the module that is in path of the stream. This is mostly OK but provides inconsistent an - in my opinion - hard to grasp information. The series reworks how the input/output format is selected and tries to improve the consistency of the prints by applying universal rules: - Module is not changing the format or it has only input or output and it has single format on in and out side Audio format for gain.1.1: - Module is not changing the format or it has only input or output and it has multiple formats on either in or out side Audio format (in/out format index: 2/0) for host-copier.0.playback: - Module is changing format then we print the input and output ones - Input if it has single format Input audio format for host-copier.0.capture: - Input has multiple formats Input audio format (format index: 0) for host-copier.0.playback: Similar versions for the output format prints.
Merge series from Binbin Zhou <[email protected]>: This patch set is mainly about Loongson i2s related issues. Please allow me to briefly explain this patch set: Patch 1-2: Add ES8323 codec required on Loongson-2K2000 Patch 3-4: Add uda1342 codec required on Loongson-2K1000 Patch 5: Fix the problem of unable to detect codec under FDT system. Patch 6-7: Add Loongson i2s platform device support
Add missing snd_soc_dai_link.platforms assignment to avoid soc_dai_link_sanity_check() failure. Fixes: d240286 ("ASoC: loongson: Add Loongson ASoC Sound Card Support") Signed-off-by: Binbin Zhou <[email protected]> Link: https://patch.msgid.link/6645888f2f9e8a1d8d799109f867d0f97fd78c58.1728459624.git.zhoubinbin@loongson.cn Signed-off-by: Mark Brown <[email protected]>
During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty thesofproject#18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, thesofproject#16] 6118: a9025bf5 stp x21, x22, [sp, thesofproject#32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, thesofproject#48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, thesofproject#64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, thesofproject#80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, thesofproject#776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, thesofproject#32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argument) to sdw_stream_add_slave() without any checks. Value from x4 is copied to x25 and finally it aborts on trying to load a value from address in x25 plus offset 32 (in dec) which corresponds to master_list member in struct sdw_stream_runtime: struct sdw_stream_runtime { const char * name; /* 0 8 */ struct sdw_stream_params params; /* 8 12 */ enum sdw_stream_state state; /* 20 4 */ enum sdw_stream_type type; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ here-> struct list_head master_list; /* 32 16 */ int m_rt_count; /* 48 4 */ /* size: 56, cachelines: 1, members: 6 */ /* sum members: 48, holes: 1, sum holes: 4 */ /* padding: 4 */ /* last cacheline: 56 bytes */ Fix this by adding required calls to qcom_snd_sdw_startup() and sdw_release_stream() to startup and shutdown routines which restores the previous correct behaviour when ->set_stream() method is called to set a valid stream runtime pointer on playback startup. Reproduced and then fix was tested on db845c RB3 board. Reported-by: Dmitry Baryshkov <[email protected]> Cc: [email protected] Fixes: 15c7fab ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") Cc: Srinivas Kandagatla <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Pierre-Louis Bossart <[email protected]> Signed-off-by: Alexey Klimov <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> # Lenovo Yoga C630 Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Added proper error handling for register value check that return -EPERM when register value does not meet expected condition Signed-off-by: Zhu Jun <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
When v4 topology support was removed, minimal topology ABI version should have been bumped. Fixes: fe4a074 ("ASoC: Drop soc-topology ABI v4 support") Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Add rt721-sdca support for PTL platform. Signed-off-by: Jack Yu <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
After removal of Skylake driver there is no users left for sst-dsp and sst-ipc interfaces. Remove them. Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
The function is for sm8250, so fix the odd number in "sm2450" prefix for soc ops shutdown callback. No functional impact. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
As the same condition was checked in inner and outer if statements. The code never reaches the inner else statement. This issue was reported by Coverity Scan with CID = 1600271. Signed-off-by: Everest K.C. <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Add a kernel parameter to work-around discrepancies between hardware and platform firmware, it's not unusual to see e.g. 38.4MHz listed in _DSD properties as the SoundWire clock source, but the hardware may be based on a 19.2 MHz mclk source. Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Bard Liao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
Follow the recommended programming flows. Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Signed-off-by: Bard Liao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
Follow recommended programming flows. Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Signed-off-by: Bard Liao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
As reported the builtin microphone doesn't work on the ASUS Vivobook model S15 OLED M3502RA. Therefore add a quirk for it to make it work. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219345 Signed-off-by: Christian Heusel <[email protected]> Link: https://patch.msgid.link/20241010-bugzilla-219345-asus-vivobook-v1-1-3bb24834e2c3@heusel.eu Signed-off-by: Mark Brown <[email protected]>
Check for return code from avs_pcm_hw_constraints_init() in avs_dai_fe_startup() only checks if value is different from 0. Currently function can return positive value, change it to return 0 on success. Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> -- I've observed KASAN on our setups and while patch itself is correct regardless. Problem seems to be caused by recent changes to rates, as this started happening after recent patchsets and doesn't reproduce with those reverted https://lore.kernel.org/linux-sound/[email protected]/ https://lore.kernel.org/linux-sound/[email protected]/ I've tested using Mark tree, where they are both applied and for some reason snd_pcm_hw_constraint_minmax() started returning positive value, while previously it returned 0. I'm bit worried if it signals some potential deeper problem regarding constraints with above changes. Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
The macro should have been defined without setting the non-existing name field in the case of CONFIG_SND_DEBUG=n. Reported-by: Stephen Rothwell <[email protected]> Closes: https://lore.kernel.org/[email protected] Fixes: 5b1913a ("ALSA: hda: Use own quirk lookup helper") Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
In the function es8323_i2c_probe(), devm_kzalloc() could possibly return NULL pointer, so IS_ERR() is wrong check in this place, thus fix it. Fixes: b97391a ("ASoC: codecs: Add support for ES8323") Signed-off-by: Tang Bin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
The variable slot_found is being initialized to zero and inside a for-loop is being checked if it's reached MAX_NUM_CH, however, this is currently impossible since slot_found is never changed. In a previous loop a similar coding pattern is used and slot_found is being incremented. It appears the increment of slot_found is missing from the loop, so fix the code by adding in the increment. Fixes: 6a8e1d4 ("ASoC: max98388: add amplifier driver") Signed-off-by: Colin Ian King <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
On the HiHope boards, we have a single port with a single endpoint defined
as below:
....
rsnd_port: port {
rsnd_endpoint: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint>;
frame-master = <&rsnd_endpoint>;
playback = <&ssi2>;
};
};
....
With commit 547b02f ("ASoC: rsnd: enable multi Component support for
Audio Graph Card/Card2"), support for multiple ports was added. This caused
probe failures on HiHope boards, as the endpoint could not be retrieved due
to incorrect device node pointers being used.
This patch fixes the issue by updating the `rsnd_dai_of_node()` and
`rsnd_dai_probe()` functions to use the correct device node pointers based
on the port names ('port' or 'ports'). It ensures that the endpoint is
properly parsed for both single and multi-port configurations, restoring
compatibility with HiHope boards.
Fixes: 547b02f ("ASoC: rsnd: enable multi Component support for Audio Graph Card/Card2")
Signed-off-by: Lad Prabhakar <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Irq handler need to be executed as fast as possible, so the log in irq handler is better to use dev_dbg which needs to be enabled when debugging. Signed-off-by: Shengjiu Wang <[email protected]> Reviewed-by: Iuliana Prodan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
When the eml_lock is already taken, we need an unlocked version. Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Liam Girdwood <[email protected]> Signed-off-by: Bard Liao <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
…fore last power-down The HDaudio mlink support makes it more logical to couple interrupt enabling/disabling with power-up/down sequences. Signed-off-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Liam Girdwood <[email protected]> Signed-off-by: Bard Liao <[email protected]> Acked-by: Vinod Koul <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
As the same condition was checked in inner and outer if statements. The code never reaches the inner else statement. Fix this by removing the logically dead inner else statement. Fixes: 7f5d603 ("ASoC: rt722-sdca: Add RT722 SDCA driver") Reported-by: Shuah Khan <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Everest K.C. <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
In the function mtk_dai_hdmitx_dptx_hw_params, the variable 'ret' is redundant, thus remove it. Signed-off-by: Tang Bin <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Merge series from Bard Liao <[email protected]>: It is more logical to couple interrupt enabling/disabling with power-up/down sequences.
Merge series from Shengjiu Wang <[email protected]>: Add cs42888 codec support
SDM845 sound card driver uses qcom_snd_sdw_startup() from the common Soundwire module, so select it to fix build failures: ERROR: modpost: "qcom_snd_sdw_startup" [sound/soc/qcom/snd-soc-sdm845.ko] undefined! Fixes: d0e806b ("ASoC: qcom: sdm845: add missing soundwire runtime stream alloc") Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
Fixes the below if kernel config disable PCI support:
sound/soc/loongson/loongson_i2s_pci.c:157:1: warning: data definition has no type or storage class
157 | module_pci_driver(loongson_i2s_driver);
| ^~~~~~~~~~~~~~~~~
sound/soc/loongson/loongson_i2s_pci.c:157:1: error: type defaults to 'int' in declaration of 'module_pci_driver' [-Wimplicit-int]
sound/soc/loongson/loongson_i2s_pci.c:157:1: error: parameter names (without types) in function declaration [-Wdeclaration-missing-parameter-type]
sound/soc/loongson/loongson_i2s_pci.c:149:26: warning: 'loongson_i2s_driver' defined but not used [-Wunused-variable]
149 | static struct pci_driver loongson_i2s_driver = {
| ^~~~~~~~~~~~~~~~~~~
Add the appropriate Kconfig dependency.
Fixes: ba4c5fa ("ASoC: loongson: Add I2S controller driver as platform device")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Binbin Zhou <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
…502 drivers To help Claudiu and offload the work, add myself to the maintainer list for those drivers. Acked-by: Claudiu Beznea <[email protected]> Signed-off-by: Andrei Simion <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
It is defined in header to 0xFF, which only allows to set values for 8 streams. In specification it is defined as bits from 0 to 29. In practice there is no HW with 29 streams, but as the only place where the value is used is chip initialization, it is best to make sure that all bits are reset properly. Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
…iable If det_mode is not 0, 3 or 5 then function will return jack_type with an uninitialzed value. Enhance switch case to prevent uninitialized variable issue. Signed-off-by: Jack Yu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
bardliao
requested review from
lgirdwood,
plbossart,
ranj063,
kv2019i,
dbaluta and
ujfalusi
as code owners
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
new upstream merge