Updates
Updated to Tasmota V13.2.0.
Tested on all EZHome Devices
Disabled MQTT Host Discovery as Tasmota team states this can cause high load and delays on tasmota devices.
Removed Flood Bulbs as they never were released.
OTA Update Notes
If updating from the OTA server listed in the plug does not work then manually download the file for your plug or bulb and upload it manually.
Power Calibration Info
Due to manufacturing variances the plug info may still be slightly off, this is normal.
If you want to get it exact for your power and particular setup you can always calibrate with the Tasmota Power Calibration guide.
Readme before upgrading
If on version V2.0 or higher, just install the firmware via the web GUI.
On a version older than V2.0? Upgrade to EZHome V1.0 before updating to this V3.0 release.
Then update to this release after you issue the Reset 4 option in the console as detailed below.
If coming from V2.0 you can upgrade in place. To get the new power calibration settings for the EZPlug plus use the Reset 4 option in the console as detailed in the V1.0 release notes.
Restore Firmware Defaults w/Keeping Wifi
We recommend resetting the firmware to defaults after installing this update. If you do not some backend settings and the OTA URL will not be correct when coming from our older firmware for the EZHome products.
To do this bring up the web interface for your device and then click the Console button.
In the console type Reset 4 and press enter. This will reset the device to defaults but still retain your wifi information.