Skip to content

Instructions for setting up the software on your deep learning machine

Notifications You must be signed in to change notification settings

subicWang/dl-setup

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 

Repository files navigation

Update: I've built a quick tool based on this repo. Start running your Tensorflow project on AWS in <30seconds using Floyd. See www.floydhub.com. It's free to try out.

Happy to take feature requests/feedback and answer questions - mail me [email protected].

Setting up a Deep Learning Machine from Scratch (Software)

A detailed guide to setting up your machine for deep learning research. Includes instructions to install drivers, tools and various deep learning frameworks. This was tested on a 64 bit machine with Nvidia Titan X, running Ubuntu 14.04

There are several great guides with a similar goal. Some are limited in scope, while others are not up to date. This guide is based on (with some portions copied verbatim from):

Table of Contents

Basics

  • First, open a terminal and run the following commands to make sure your OS is up-to-date

      sudo apt-get update  
      sudo apt-get upgrade  
      sudo apt-get install build-essential cmake g++ gfortran git pkg-config python-dev software-properties-common wget
      sudo apt-get autoremove 
      sudo rm -rf /var/lib/apt/lists/*
    

Nvidia Drivers

  • Find your graphics card model

      lspci | grep -i nvidia
    
  • Go to the Nvidia website and find the latest drivers for your graphics card and system setup. You can download the driver from the website and install it, but doing so makes updating to newer drivers and uninstalling it a little messy. Also, doing this will require you having to quit your X server session and install from a Terminal session, which is a hassle.

  • We will install the drivers using apt-get. Check if your latest driver exists in the "Proprietary GPU Drivers" PPA. Note that the latest drivers are necessarily the most stable. It is advisable to install the driver version recommended on that page. Add the "Proprietary GPU Drivers" PPA repository. At the time of this writing, the latest version is 361.42, however, the recommended version is 352:

      sudo add-apt-repository ppa:graphics-drivers/ppa
      sudo apt-get update
      sudo apt-get install nvidia-352
    
  • Restart your system

      sudo shutdown -r now
    
  • Check to ensure that the correct version of NVIDIA drivers are installed

      cat /proc/driver/nvidia/version
    

CUDA

  • Download CUDA 7.5 from Nvidia. Go to the Downloads directory and install CUDA

      sudo dpkg -i cuda-repo-ubuntu1404*amd64.deb
      sudo apt-get update
      sudo apt-get install cuda
    
  • Add CUDA to the environment variables

      echo 'export PATH=/usr/local/cuda/bin:$PATH' >> ~/.bashrc
      echo 'export LD_LIBRARY_PATH=/usr/local/cuda/lib64:$LD_LIBRARY_PATH' >> ~/.bashrc
      source ~/.bashrc
    
  • Check to ensure the correct version of CUDA is installed

      nvcc -V
    
  • Restart your computer

      sudo shutdown -r now
    

Checking your CUDA Installation (Optional)

  • Install the samples in the CUDA directory. Compile them (takes a few minutes):

      /usr/local/cuda/bin/cuda-install-samples-7.5.sh ~/cuda-samples
      cd ~/cuda-samples/NVIDIA*Samples
      make -j $(($(nproc) + 1))
    

Note: (-j $(($(nproc) + 1))) executes the make command in parallel using the number of cores in your machine, so the compilation is faster

  • Run deviceQuery and ensure that it detects your graphics card and the tests pass

      bin/x86_64/linux/release/deviceQuery
    

cuDNN

  • cuDNN is a GPU accelerated library for DNNs. It can help speed up execution in many cases. To be able to download the cuDNN library, you need to register in the Nvidia website at https://developer.nvidia.com/cudnn. This can take anywhere between a few hours to a couple of working days to get approved. Once your registration is approved, download cuDNN v4 for Linux. The latest version is cuDNN v5, however, not all toolkits support it yet.

  • Extract and copy the files

      cd ~/Downloads/
      tar xvf cudnn*.tgz
      cd cuda
      sudo cp */*.h /usr/local/cuda/include/
      sudo cp */libcudnn* /usr/local/cuda/lib64/
      sudo chmod a+r /usr/local/cuda/lib64/libcudnn*
    

Check

  • You can do a check to ensure everything is good so far using the nvidia-smi command. This should output some stats about your GPU

Python Packages

  • Install some useful Python packages using apt-get. There are some version incompatibilities with using pip install and TensorFlow ( see tensorflow/tensorflow#2034)

      sudo apt-get update && apt-get install -y python-numpy python-scipy python-nose \
                                              python-h5py python-skimage python-matplotlib \
                                      python-pandas python-sklearn python-sympy
      sudo apt-get clean && sudo apt-get autoremove
      rm -rf /var/lib/apt/lists/*
    

Tensorflow

  • This installs v0.8 with GPU support. Instructions below are from here

      sudo apt-get install python-pip python-dev
      sudo pip install --upgrade https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow-0.8.0-cp27-none-linux_x86_64.whl
    
  • Run a test to ensure your Tensorflow installation is successful. When you execute the import command, there should be no warning/error.

      python
      >>> import tensorflow as tf
      >>> exit()
    

OpenBLAS

  • OpenBLAS is a linear algebra library and is faster than Atlas. This step is optional, but note that some of the following steps assume that OpenBLAS is installed. You'll need to install gfortran to compile it.

      mkdir ~/git
      cd ~/git
      git clone https://github.com/xianyi/OpenBLAS.git
      cd OpenBLAS
      make FC=gfortran -j $(($(nproc) + 1))
      sudo make PREFIX=/usr/local install
    
  • Add the path to your LD_LIBRARY_PATH variable

      echo 'export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH' >> ~/.bashrc
    

Common Tools

  • Install some common tools from the Scipy stack

      sudo apt-get install -y libfreetype6-dev libpng12-dev
      pip install -U matplotlib ipython[all] jupyter pandas scikit-image
    

Caffe

  • The following instructions are from here. The first step is to install the pre-requisites

      sudo apt-get install libprotobuf-dev libleveldb-dev libsnappy-dev libopencv-dev libhdf5-serial-dev protobuf-compiler
      sudo apt-get install --no-install-recommends libboost-all-dev
      sudo apt-get install libgflags-dev libgoogle-glog-dev liblmdb-dev
    
  • Clone the Caffe repo

      cd ~/git
      git clone https://github.com/BVLC/caffe.git
      cd caffe
      cp Makefile.config.example Makefile.config
    
  • If you installed cuDNN, uncomment the USE_CUDNN := 1 line in the Makefile

      sed -i 's/# USE_CUDNN := 1/USE_CUDNN := 1/' Makefile.config
    
  • If you installed OpenBLAS, modify the BLAS parameter value to open

      sed -i 's/BLAS := atlas/BLAS := open/' Makefile.config
    
  • Install the requirements, build Caffe, build the tests, run the tests and ensure that all tests pass. Note that all this takes a while

      sudo pip install -r python/requirements.txt
      make all -j $(($(nproc) + 1))
      make test -j $(($(nproc) + 1))
      make runtest -j $(($(nproc) + 1))
    
  • Build PyCaffe, the Python interface to Caffe

      make pycaffe -j $(($(nproc) + 1))
    
  • Add Caffe to your environment variable

      echo 'export CAFFE_ROOT=$(pwd)' >> ~/.bashrc
      echo 'export PYTHONPATH=$CAFFE_ROOT/python:$PYTHONPATH' >> ~/.bashrc
      source ~/.bashrc
    
  • Test to ensure that your Caffe installation is successful. There should be no warnings/errors when the import command is executed.

      ipython
      >>> import caffe
      >>> exit()
    

Theano

  • Install the pre-requisites and install Theano. These instructions are sourced from here

      sudo apt-get install python-numpy python-scipy python-dev python-pip python-nose g++ python-pygments python-sphinx python-nose
      sudo pip install Theano
    
  • Test your Theano installation. There should be no warnings/errors when the import command is executed.

      python
      >>> import theano
      >>> exit()
    

Keras

  • Keras is a useful wrapper around Theano and Tensorflow. By default, it uses Theano as the backend. See here for instructions on how to change this to Tensorflow.

      sudo pip install keras
    

Torch

  • Instructions to install Torch below are sourced from here. The installation takes a little while

      git clone https://github.com/torch/distro.git ~/git/torch --recursive
      cd torch; bash install-deps;
      ./install.sh
    

X2Go

  • If your deep learning machine is not your primary work desktop, it helps to be able to access it remotely. X2Go is a fantastic remote access solution. You can install the X2Go server on your Ubuntu machine using the instructions below.

      sudo apt-get install software-properties-common
      sudo add-apt-repository ppa:x2go/stable
      sudo apt-get update
      sudo apt-get install x2goserver x2goserver-xsession
    
  • X2Go does not support the Unity desktop environment (the default in Ubuntu). I have found XFCE to work pretty well. More details on the supported environmens here

      sudo apt-get update
      sudo apt-get install -y xfce4 xfce4-goodies xubuntu-desktop
    
  • Find the IP of your machine using

      hostname -I
    
  • You can install a client on your main machine to connect to your deep learning server using the above IP. More instructions here depending on your Client OS

About

Instructions for setting up the software on your deep learning machine

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published