Scheduled monthly dependency update for April #60

pyup-bot · 2020-04-01T18:34:17Z

Update PyYAML from 5.1.2 to 5.3.1.

The bot wasn't able to find a changelog for this release. Got an idea?

Links

PyPI: https://pypi.org/project/pyyaml
Repo: https://github.com/yaml/pyyaml

Update wheel from 0.33.6 to 0.34.2.

Changelog

0.34.2

- Fixed installation of ``wheel`` from sdist on environments without Unicode
file name support

0.34.1

- Fixed installation of ``wheel`` from sdist which was broken due to a chicken
and egg problem with PEP 517 and setuptools_scm

0.34.0

- Dropped Python 3.4 support
- Added automatic platform tag detection for macOS binary wheels
(PR by Grzegorz Bokota)
- Added the ``--compression=`` option to the ``bdist_wheel`` command
- Fixed PyPy tag generation to work with the updated semantics (328)
- Updated project packaging and testing configuration for :pep:`517`
- Moved the contents of setup.py to setup.cfg
- Fixed duplicate RECORD file when using ``wheel pack`` on Windows
- Fixed bdist_wheel failing at cleanup on Windows with a read-only source tree
- Fixed ``wheel pack`` not respecting the existing build tag in ``WHEEL``
- Switched the project to use the &quot;src&quot; layout
- Switched to setuptools_scm_ for versioning

.. _setuptools_scm: https://github.com/pypa/setuptools_scm/

Links

PyPI: https://pypi.org/project/wheel
Changelog: https://pyup.io/changelogs/wheel/
Repo: https://github.com/pypa/wheel

Update watchdog from 0.9.0 to 0.10.2.

Changelog

0.10.2

~~~~~~

2020-02-08 • `full history &lt;https://github.com/gorakhargosh/watchdog/compare/v0.10.1...v0.10.2&gt;`__

- Fixed the ``build_ext`` command on macOS Catalina (`628 &lt;https://github.com/gorakhargosh/watchdog/pull/628&gt;`__)
- Fixed the installation of macOS requirements on non-macOS OSes (`635 &lt;https://github.com/gorakhargosh/watchdog/pull/635&gt;`__)
- Refactored ``dispatch()`` method of ``FileSystemEventHandler``,
``PatternMatchingEventHandler`` and ``RegexMatchingEventHandler``
- [bsd] Improved tests support on non Windows/Linux platforms (`633 &lt;https://github.com/gorakhargosh/watchdog/pull/633&gt;`__, `639 &lt;https://github.com/gorakhargosh/watchdog/pull/639&gt;`__)
- [bsd] Added FreeBSD CI support (`532 &lt;https://github.com/gorakhargosh/watchdog/pull/532&gt;`__)
- [bsd] Restored full support (`638 &lt;https://github.com/gorakhargosh/watchdog/pull/638&gt;`__, `641 &lt;https://github.com/gorakhargosh/watchdog/pull/641&gt;`__)
- Thanks to our beloved contributors: BoboTiG, evilham, danilobellini

0.10.1

~~~~~~

2020-01-30 • `full history &lt;https://github.com/gorakhargosh/watchdog/compare/v0.10.0...v0.10.1&gt;`__

- Fixed Python 2.7 to 3.6 installation when the OS locale is set to POSIX (`615 &lt;https://github.com/gorakhargosh/watchdog/pull/615&gt;`__)
- Fixed the ``build_ext`` command on macOS  (`618 &lt;https://github.com/gorakhargosh/watchdog/pull/618&gt;`__, `620 &lt;https://github.com/gorakhargosh/watchdog/pull/620&gt;`_)
- Moved requirements to ``setup.cfg``  (`617 &lt;https://github.com/gorakhargosh/watchdog/pull/617&gt;`__)
- [mac] Removed old C code for Python 2.5 in the `fsevents` C implementation
- [snapshot] Added ``EmptyDirectorySnapshot`` (`613 &lt;https://github.com/gorakhargosh/watchdog/pull/613&gt;`__)
- Thanks to our beloved contributors: Ajordat, tehkirill, BoboTiG

0.10.0

~~~~~~

2020-01-26 • `full history &lt;https://github.com/gorakhargosh/watchdog/compare/v0.9.0...v0.10.0&gt;`__

**Breaking Changes**

- Dropped support for Python 2.6, 3.2 and 3.3
- Emitters that failed to start are now removed
- [snapshot] Removed the deprecated ``walker_callback`` argument,
use ``stat`` instead
- [watchmedo] The utility is no more installed by default but via the extra
``watchdog[watchmedo]``

**Other Changes**

- Fixed several Python 3 warnings
- Identify synthesized events with ``is_synthetic`` attribute (`369 &lt;https://github.com/gorakhargosh/watchdog/pull/369&gt;`__)
- Use ``os.scandir()`` to improve memory usage (`503 &lt;https://github.com/gorakhargosh/watchdog/pull/503&gt;`__)
- [bsd] Fixed flavors of FreeBSD detection (`529 &lt;https://github.com/gorakhargosh/watchdog/pull/529&gt;`__)
- [bsd] Skip unprocessable socket files (`509 &lt;https://github.com/gorakhargosh/watchdog/issue/509&gt;`__)
- [inotify] Fixed events containing non-ASCII characters (`516 &lt;https://github.com/gorakhargosh/watchdog/issues/516&gt;`__)
- [inotify] Fixed the way ``OSError`` are re-raised (`377 &lt;https://github.com/gorakhargosh/watchdog/issues/377&gt;`__)
- [inotify] Fixed wrong source path after renaming a top level folder (`515 &lt;https://github.com/gorakhargosh/watchdog/pull/515&gt;`__)
- [inotify] Removed  delay from non-move events (`477 &lt;https://github.com/gorakhargosh/watchdog/pull/477&gt;`__)
- [mac] Fixed a bug when calling ``FSEventsEmitter.stop()`` twice (`466 &lt;https://github.com/gorakhargosh/watchdog/pull/466&gt;`__)
- [mac] Support for unscheduling deleted watch (`541 &lt;https://github.com/gorakhargosh/watchdog/issue/541&gt;`__)
- [mac] Fixed missing field initializers and unused parameters in
``watchdog_fsevents.c``
- [snapshot] Don&#39;t walk directories without read permissions (`408 &lt;https://github.com/gorakhargosh/watchdog/pull/408&gt;`__)
- [snapshot] Fixed a race condition crash when a directory is swapped for a file (`513 &lt;https://github.com/gorakhargosh/watchdog/pull/513&gt;`__)
- [snasphot] Fixed an ``AttributeError`` about forgotten ``path_for_inode`` attr (`436 &lt;https://github.com/gorakhargosh/watchdog/issues/436&gt;`__)
- [snasphot] Added the ``ignore_device=False`` parameter to the ctor (`597 &lt;https://github.com/gorakhargosh/watchdog/pull/597&gt;`__)
- [watchmedo] Fixed the path separator used (`478 &lt;https://github.com/gorakhargosh/watchdog/pull/478&gt;`__)
- [watchmedo] Fixed the use of ``yaml.load()`` for ``yaml.safe_load()`` (`453 &lt;https://github.com/gorakhargosh/watchdog/issues/453&gt;`__)
- [watchmedo] Handle all available signals (`549 &lt;https://github.com/gorakhargosh/watchdog/issue/549&gt;`__)
- [watchmedo] Added the ``--debug-force-polling`` argument (`404 &lt;https://github.com/gorakhargosh/watchdog/pull/404&gt;`__)
- [windows] Fixed issues when the observed directory is deleted (`570 &lt;https://github.com/gorakhargosh/watchdog/issues/570&gt;`__ and `601 &lt;https://github.com/gorakhargosh/watchdog/pull/601&gt;`__)
- [windows] ``WindowsApiEmitter`` made easier to subclass (`344 &lt;https://github.com/gorakhargosh/watchdog/pull/344&gt;`__)
- [windows] Use separate ctypes DLL instances
- [windows] Generate sub created events only if ``recursive=True`` (`454 &lt;https://github.com/gorakhargosh/watchdog/pull/454&gt;`__)
- Thanks to our beloved contributors: BoboTiG, LKleinNux, rrzaripov,
wildmichael, TauPan, segevfiner, petrblahos, QuantumEnergyE,
jeffwidman, kapsh, nickoala, petrblahos, julianolf, tonybaloney,
mbakiev, pR0Ps, javaguirre, skurfer, exarkun, joshuaskelly,
danilobellini, Ajordat

Links

PyPI: https://pypi.org/project/watchdog
Changelog: https://pyup.io/changelogs/watchdog/
Repo: http://github.com/gorakhargosh/watchdog
Docs: https://pythonhosted.org/watchdog/

Update flake8 from 3.7.8 to 3.7.9.

The bot wasn't able to find a changelog for this release. Got an idea?

Links

PyPI: https://pypi.org/project/flake8
Changelog: https://pyup.io/changelogs/flake8/
Repo: https://gitlab.com/pycqa/flake8

Update tox from 3.13.2 to 3.14.6.

The bot wasn't able to find a changelog for this release. Got an idea?

Links

PyPI: https://pypi.org/project/tox
Docs: http://tox.readthedocs.org

Update Sphinx from 2.2.0 to 2.4.4.

Changelog

2.4.4

=====================================

Bugs fixed
----------

* 7197: LaTeX: platex cause error to build image directive with target url
* 7223: Sphinx builds has been slower since 2.4.0

2.4.3

=====================================

Bugs fixed
----------

* 7184: autodoc: ``*args`` and ``**kwarg`` in type comments are not handled
properly
* 7189: autodoc: classmethod coroutines are not detected
* 7183: intersphinx: ``:attr:`` reference to property is broken
* 6244, 6387: html search: Search breaks/hangs when built with dirhtml builder
* 7195: todo: emit doctree-resolved event with non-document node incorrectly

2.4.2

=====================================

Bugs fixed
----------

* 7138: autodoc: ``autodoc.typehints`` crashed when variable has unbound object
as a value
* 7156: autodoc: separator for keyword only arguments is not shown
* 7146: autodoc: IndexError is raised on suppressed type_comment found
* 7161: autodoc: typehints extension does not support parallel build
* 7178: autodoc: TypeError is raised on fetching type annotations
* 7151: crashed when extension assigns a value to ``env.indexentries``
* 7170: text: Remove debug print
* 7137: viewcode: Avoid to crash when non-python code given

2.4.1

=====================================

Bugs fixed
----------

* 7120: html: crashed when on scaling SVG images which have float dimentions
* 7126: autodoc: TypeError: &#39;getset_descriptor&#39; object is not iterable

2.4.0

=====================================

Deprecated
----------

* The ``decode`` argument of ``sphinx.pycode.ModuleAnalyzer()``
* ``sphinx.directives.other.Index``
* ``sphinx.environment.temp_data[&#39;gloss_entries&#39;]``
* ``sphinx.environment.BuildEnvironment.indexentries``
* ``sphinx.environment.collectors.indexentries.IndexEntriesCollector``
* ``sphinx.ext.apidoc.INITPY``
* ``sphinx.ext.apidoc.shall_skip()``
* ``sphinx.io.FiletypeNotFoundError``
* ``sphinx.io.get_filetype()``
* ``sphinx.pycode.ModuleAnalyzer.encoding``
* ``sphinx.roles.Index``
* ``sphinx.util.detect_encoding()``
* ``sphinx.util.get_module_source()``
* ``sphinx.util.inspect.Signature``
* ``sphinx.util.inspect.safe_getmembers()``
* ``sphinx.writers.latex.LaTeXTranslator.settings.author``
* ``sphinx.writers.latex.LaTeXTranslator.settings.contentsname``
* ``sphinx.writers.latex.LaTeXTranslator.settings.docclass``
* ``sphinx.writers.latex.LaTeXTranslator.settings.docname``
* ``sphinx.writers.latex.LaTeXTranslator.settings.title``
* ``sphinx.writers.latex.ADDITIONAL_SETTINGS``
* ``sphinx.writers.latex.DEFAULT_SETTINGS``
* ``sphinx.writers.latex.LUALATEX_DEFAULT_FONTPKG``
* ``sphinx.writers.latex.PDFLATEX_DEFAULT_FONTPKG``
* ``sphinx.writers.latex.XELATEX_DEFAULT_FONTPKG``
* ``sphinx.writers.latex.XELATEX_GREEK_DEFAULT_FONTPKG``

Features added
--------------

* 6910: inheritance_diagram: Make the background of diagrams transparent
* 6446: duration: Add ``sphinx.ext.durations`` to inspect which documents slow
down the build
* 6837: LaTeX: Support a nested table
* 7115: LaTeX: Allow to override LATEXOPTS and LATEXMKOPTS via environment
variable
* 6966: graphviz: Support ``:class:`` option
* 6696: html: ``:scale:`` option of image/figure directive not working for SVG
images (imagesize-1.2.0 or above is required)
* 6994: imgconverter: Support illustrator file (.ai) to .png conversion
* autodoc: Support Positional-Only Argument separator (PEP-570 compliant)
* autodoc: Support type annotations for variables
* 2755: autodoc: Add new event: :event:`autodoc-before-process-signature`
* 2755: autodoc: Support type_comment style (ex. `` type: (str) -&gt; str``)
annotation (python3.8+ or `typed_ast &lt;https://github.com/python/typed_ast&gt;`_
is required)
* 7051: autodoc: Support instance variables without defaults (PEP-526)
* 6418: autodoc: Add a new extension ``sphinx.ext.autodoc.typehints``. It shows
typehints as object description if ``autodoc_typehints = &quot;description&quot;`` set.
This is an experimental extension and it will be integrated into autodoc core
in Sphinx-3.0
* SphinxTranslator now calls visitor/departure method for super node class if
visitor/departure method for original node class not found
* 6418: Add new event: :event:`object-description-transform`
* py domain: :rst:dir:`py:data` and :rst:dir:`py:attribute` take new options
named ``:type:`` and ``:value:`` to describe its type and initial value
* 6785: py domain: ``:py:attr:`` is able to refer properties again
* 6772: apidoc: Add ``-q`` option for quiet mode

Bugs fixed
----------

* 6925: html: Remove redundant type=&quot;text/javascript&quot; from &lt;script&gt; elements
* 7112: html: SVG image is not layouted as float even if aligned
* 6906, 6907: autodoc: failed to read the source codes encoeded in cp1251
* 6961: latex: warning for babel shown twice
* 7059: latex: LaTeX compilation falls into infinite loop (wrapfig issue)
* 6581: latex: ``:reversed:`` option for toctree does not effect to LaTeX build
* 6559: Wrong node-ids are generated in glossary directive
* 6986: apidoc: misdetects module name for .so file inside module
* 6899: apidoc: private members are not shown even if ``--private`` given
* 6327: apidoc: Support a python package consisted of __init__.so file
* 6999: napoleon: fails to parse tilde in :exc: role
* 7019: gettext: Absolute path used in message catalogs
* 7023: autodoc: nested partial functions are not listed
* 7023: autodoc: partial functions imported from other modules are listed as
module members without :impoprted-members: option
* 6889: autodoc: Trailing comma in ``:members::`` option causes cryptic warning
* 6568: autosummary: ``autosummary_imported_members`` is ignored on generating
a stub file for submodule
* 7055: linkcheck: redirect is treated as an error
* 7088: HTML template: If ``navigation_with_keys`` option is activated,
modifier keys are ignored, which means the feature can interfere with browser
features
* 7090: std domain: Can&#39;t assign numfig-numbers for custom container nodes
* 7106: std domain: enumerated nodes are marked as duplicated when extensions
call ``note_explicit_target()``
* 7095: dirhtml: Cross references are broken via intersphinx and ``:doc:`` role
* C++:

- Don&#39;t crash when using the ``struct`` role in some cases.
- Don&#39;t warn when using the ``var``/``member`` role for function
 parameters.
- Render call and braced-init expressions correctly.
* 7097: Filenames of images generated by
``sphinx.transforms.post_transforms.images.ImageConverter``
or its subclasses (used for latex build) are now sanitized,
to prevent broken paths

2.3.1

=====================================

Bugs fixed
----------

* 6936: sphinx-autogen: raises AttributeError

2.3.0

=====================================

Incompatible changes
--------------------

* 6742: ``end-before`` option of :rst:dir:`literalinclude` directive does not
match the first line of the code block.
* 1331: Change default User-Agent header to ``&quot;Sphinx/X.Y.Z requests/X.Y.Z
python/X.Y.Z&quot;``.  It can be changed via :confval:`user_agent`.
* 6867: text: content of admonitions starts after a blank line

Deprecated
----------

* ``sphinx.builders.gettext.POHEADER``
* ``sphinx.io.SphinxStandaloneReader.app``
* ``sphinx.io.SphinxStandaloneReader.env``
* ``sphinx.util.texescape.tex_escape_map``
* ``sphinx.util.texescape.tex_hl_escape_map_new``
* ``sphinx.writers.latex.LaTeXTranslator.no_contractions``

Features added
--------------

* 6707: C++, support bit-fields.
* 267: html: Eliminate prompt characters of doctest block from copyable text
* 6548: html: Use favicon for OpenSearch if available
* 6729: html theme: agogo theme now supports ``rightsidebar`` option
* 6780: Add PEP-561 Support
* 6762: latex: Allow to load additonal LaTeX packages via ``extrapackages`` key
of :confval:`latex_elements`
* 1331: Add new config variable: :confval:`user_agent`
* 6000: LaTeX: have backslash also be an inline literal word wrap break
character
* 4186: LaTeX: Support upLaTeX as a new :confval:`latex_engine` (experimental)
* 6812: Improve a warning message when extensions are not parallel safe
* 6818: Improve Intersphinx performance for multiple remote inventories.
* 2546: apidoc: .so file support
* 6798: autosummary: emit ``autodoc-skip-member`` event on generating stub file
* 6483: i18n: make explicit titles in toctree translatable
* 6816: linkcheck: Add :confval:`linkcheck_auth` option to provide
authentication information when doing ``linkcheck`` builds
* 6872: linkcheck: Handles HTTP 308 Permanent Redirect
* 6613: html: Wrap section number in span tag
* 6781: gettext: Add :confval:`gettext_last_translator&#39; and
:confval:`gettext_language_team` to customize headers of POT file

Bugs fixed
----------

* 6668: LaTeX: Longtable before header has incorrect distance
(refs: `latex3/latex2e173`_)

.. _latex3/latex2e173: https://github.com/latex3/latex2e/issues/173
* 6618: LaTeX: Avoid section names at the end of a page
* 6738: LaTeX: Do not replace unicode characters by LaTeX macros on unicode
supported LaTeX engines: ¶, §, €, ∞, ±, →, ‣, –, superscript and subscript
digits go through &quot;as is&quot; (as default OpenType font supports them)
* 6704: linkcheck: Be defensive and handle newly defined HTTP error code
* 6806: linkcheck: Failure on parsing content
* 6655: image URLs containing ``data:`` causes gettext builder crashed
* 6584: i18n: Error when compiling message catalogs on Hindi
* 6718: i18n: KeyError is raised if section title and table title are same
* 6743: i18n: :confval:`rst_prolog` breaks the translation
* 6708: mathbase: Some deprecated functions have removed
* 6709: autodoc: mock object does not work as a class decorator
* 5070: epub: Wrong internal href fragment links
* 6712: Allow not to install sphinx.testing as runtime (mainly for ALT Linux)
* 6741: html: search result was broken with empty :confval:`html_file_suffix`
* 6001: LaTeX does not wrap long code lines at backslash character
* 6804: LaTeX: PDF build breaks if admonition of danger type contains
code-block long enough not to fit on one page
* 6809: LaTeX: code-block in a danger type admonition can easily spill over
bottom of page
* 6793: texinfo: Code examples broken following &quot;sidebar&quot;
* 6813: An orphan warning is emitted for included document on Windows.  Thanks
to drillan
* 6850: Fix smartypants module calls re.sub() with wrong options
* 6824: HTML search: If a search term is partially matched in the title and
fully matched in a text paragraph on the same page, the search does not
include this match.
* 6848: config.py shouldn&#39;t pop extensions from overrides
* 6867: text: extra spaces are inserted to hyphenated words on folding lines
* 6886: LaTeX: xelatex converts straight double quotes into right curly ones
(shows when :confval:`smartquotes` is ``False``)
* 6890: LaTeX: even with smartquotes off, PDF output transforms straight
quotes and consecutive hyphens into curly quotes and dashes
* 6876: LaTeX: multi-line display of authors on title page has ragged edges
* 6887: Sphinx crashes with docutils-0.16b0
* 6920: sphinx-build: A console message is wrongly highlighted
* 6900: sphinx-build: ``-D`` option does not considers ``0`` and ``1`` as a
boolean value

2.2.2

=====================================

Incompatible changes
--------------------

* 6803: For security reason of python, parallel mode is disabled on macOS and
Python3.8+

Bugs fixed
----------

* 6776: LaTeX: 2019-10-01 LaTeX release breaks :file:`sphinxcyrillic.sty`
* 6815: i18n: French, Hindi, Chinese, Japanese and Korean translation messages
has been broken
* 6803: parallel build causes AttributeError on macOS and Python3.8

2.2.1

=====================================

Bugs fixed
----------

* 6641: LaTeX: Undefined control sequence ``\sphinxmaketitle``
* 6710: LaTeX not well configured for Greek language as main language
* 6759: validation of html static paths and extra paths no longer throws
an error if the paths are in different directories

Links

PyPI: https://pypi.org/project/sphinx
Changelog: https://pyup.io/changelogs/sphinx/
Homepage: http://sphinx-doc.org/

Update coverage from 4.5.4 to 5.0.4.

Changelog

5.0.4

----------------------------

- If using the ``[run] relative_files`` setting, the XML report will use
relative files in the ``&lt;source&gt;`` elements indicating the location of source
code.  Closes `issue 948`_.

- The textual summary report could report missing lines with negative line
numbers on PyPy3 7.1 (`issue 943`_).  This is now fixed.

- Windows wheels for Python 3.8 were incorrectly built, but are now fixed.
(`issue 949`_)

- Updated Python 3.9 support to 3.9a4.

- HTML reports couldn&#39;t be sorted if localStorage wasn&#39;t available. This is now
fixed: sorting works even though the sorting setting isn&#39;t retained. (`issue
944`_ and `pull request 945`_). Thanks, Abdeali Kothari.

.. _issue 943: https://github.com/nedbat/coveragepy/issues/943
.. _issue 944: https://github.com/nedbat/coveragepy/issues/944
.. _pull request 945: https://github.com/nedbat/coveragepy/pull/945
.. _issue 948: https://github.com/nedbat/coveragepy/issues/948
.. _issue 949: https://github.com/nedbat/coveragepy/issues/949


.. _changes_503:

5.0.3

----------------------------

- A performance improvement in 5.0.2 didn&#39;t work for test suites that changed
directory before combining data, causing &quot;Couldn&#39;t use data file: no such
table: meta&quot; errors (`issue 916`_).  This is now fixed.

- Coverage could fail to run your program with some form of &quot;ModuleNotFound&quot; or
&quot;ImportError&quot; trying to import from the current directory. This would happen
if coverage had been packaged into a zip file (for example, on Windows), or
was found indirectly (for example, by pyenv-virtualenv).  A number of
different scenarios were described in `issue 862`_ which is now fixed.  Huge
thanks to Agbonze O. Jeremiah for reporting it, and Alexander Waters and
George-Cristian Bîrzan for protracted debugging sessions.

- Added the &quot;premain&quot; debug option.

- Added SQLite compile-time options to the &quot;debug sys&quot; output.

.. _issue 862: https://github.com/nedbat/coveragepy/issues/862
.. _issue 916: https://github.com/nedbat/coveragepy/issues/916


.. _changes_502:

5.0.2

----------------------------

- Programs that used multiprocessing and changed directories would fail under
coverage.  This is now fixed (`issue 890`_).  A side effect is that debug
information about the config files read now shows absolute paths to the
files.

- When running programs as modules (``coverage run -m``) with ``--source``,
some measured modules were imported before coverage starts.  This resulted in
unwanted warnings (&quot;Already imported a file that will be measured&quot;) and a
reduction in coverage totals (`issue 909`_).  This is now fixed.

- If no data was collected, an exception about &quot;No data to report&quot; could happen
instead of a 0% report being created (`issue 884`_).  This is now fixed.

- The handling of source files with non-encodable file names has changed.
Previously, if a file name could not be encoded as UTF-8, an error occurred,
as described in `issue 891`_.  Now, those files will not be measured, since
their data would not be recordable.

- A new warning (&quot;dynamic-conflict&quot;) is issued if two mechanisms are trying to
change the dynamic context.  Closes `issue 901`_.

- ``coverage run --debug=sys`` would fail with an AttributeError. This is now
fixed (`issue 907`_).

.. _issue 884: https://github.com/nedbat/coveragepy/issues/884
.. _issue 890: https://github.com/nedbat/coveragepy/issues/890
.. _issue 891: https://github.com/nedbat/coveragepy/issues/891
.. _issue 901: https://github.com/nedbat/coveragepy/issues/901
.. _issue 907: https://github.com/nedbat/coveragepy/issues/907
.. _issue 909: https://github.com/nedbat/coveragepy/issues/909


.. _changes_501:

5.0.1

----------------------------

- If a 4.x data file is the cause of a &quot;file is not a database&quot; error, then use
a more specific error message, &quot;Looks like a coverage 4.x data file, are you
mixing versions of coverage?&quot;  Helps diagnose the problems described in
`issue 886`_.

- Measurement contexts and relative file names didn&#39;t work together, as
reported in `issue 899`_ and `issue 900`_.  This is now fixed, thanks to
David Szotten.

- When using ``coverage run --concurrency=multiprocessing``, all data files
should be named with parallel-ready suffixes.  5.0 mistakenly named the main
process&#39; file with no suffix when using ``--append``.  This is now fixed,
closing `issue 880`_.

- Fixed a problem on Windows when the current directory is changed to a
different drive (`issue 895`_).  Thanks, Olivier Grisel.

- Updated Python 3.9 support to 3.9a2.

.. _issue 880: https://github.com/nedbat/coveragepy/issues/880
.. _issue 886: https://github.com/nedbat/coveragepy/issues/886
.. _issue 895: https://github.com/nedbat/coveragepy/issues/895
.. _issue 899: https://github.com/nedbat/coveragepy/issues/899
.. _issue 900: https://github.com/nedbat/coveragepy/issues/900


.. _changes_50:

5.0

--------------------------

Nothing new beyond 5.0b2.


.. _changes_50b2:

5.0b2

----------------------------

- An experimental ``[run] relative_files`` setting tells coverage to store
relative file names in the data file. This makes it easier to run tests in
one (or many) environments, and then report in another.  It has not had much
real-world testing, so it may change in incompatible ways in the future.

- When constructing a :class:`coverage.Coverage` object, `data_file` can be
specified as None to prevent writing any data file at all.  In previous
versions, an explicit `data_file=None` argument would use the default of
&quot;.coverage&quot;. Fixes `issue 871`_.

- Python files run with ``-m`` now have ``__spec__`` defined properly.  This
fixes `issue 745`_ (about not being able to run unittest tests that spawn
subprocesses), and `issue 838`_, which described the problem directly.

- The ``[paths]`` configuration section is now ordered. If you specify more
than one list of patterns, the first one that matches will be used.  Fixes
`issue 649`_.

- The :func:`.coverage.numbits.register_sqlite_functions` function now also
registers `numbits_to_nums` for use in SQLite queries.  Thanks, Simon
Willison.

- Python 3.9a1 is supported.

- Coverage.py has a mascot: :ref:`Sleepy Snake &lt;sleepy&gt;`.

.. _issue 649: https://github.com/nedbat/coveragepy/issues/649
.. _issue 745: https://github.com/nedbat/coveragepy/issues/745
.. _issue 838: https://github.com/nedbat/coveragepy/issues/838
.. _issue 871: https://github.com/nedbat/coveragepy/issues/871


.. _changes_50b1:

5.0b1

----------------------------

- The HTML and textual reports now have a ``--skip-empty`` option that skips
files with no statements, notably ``__init__.py`` files.  Thanks, Reya B.

- Configuration can now be read from `TOML`_ files.  This requires installing
coverage.py with the ``[toml]`` extra.  The standard &quot;pyproject.toml&quot; file
will be read automatically if no other configuration file is found, with
settings in the ``[tool.coverage.]`` namespace.  Thanks to Frazer McLean for
implementation and persistence.  Finishes `issue 664`_.

- The ``[run] note`` setting has been deprecated. Using it will result in a
warning, and the note will not be written to the data file.  The
corresponding :class:`.CoverageData` methods have been removed.

- The HTML report has been reimplemented (no more table around the source
code). This allowed for a better presentation of the context information,
hopefully resolving `issue 855`_.

- Added sqlite3 module version information to ``coverage debug sys`` output.

- Asking the HTML report to show contexts (``[html] show_contexts=True`` or
``coverage html --show-contexts``) will issue a warning if there were no
contexts measured (`issue 851`_).

.. _TOML: https://github.com/toml-lang/tomlreadme
.. _issue 664: https://github.com/nedbat/coveragepy/issues/664
.. _issue 851: https://github.com/nedbat/coveragepy/issues/851
.. _issue 855: https://github.com/nedbat/coveragepy/issues/855


.. _changes_50a8:

5.0a8

----------------------------

- The :class:`.CoverageData` API has changed how queries are limited to
specific contexts.  Now you use :meth:`.CoverageData.set_query_context` to
set a single exact-match string, or :meth:`.CoverageData.set_query_contexts`
to set a list of regular expressions to match contexts.  This changes the
command-line ``--contexts`` option to use regular expressions instead of
filename-style wildcards.


.. _changes_50a7:

5.0a7

----------------------------

- Data can now be &quot;reported&quot; in JSON format, for programmatic use, as requested
in `issue 720`_.  The new ``coverage json`` command writes raw and summarized
data to a JSON file.  Thanks, Matt Bachmann.

- Dynamic contexts are now supported in the Python tracer, which is important
for PyPy users.  Closes `issue 846`_.

- The compact line number representation introduced in 5.0a6 is called a
&quot;numbits.&quot;  The :mod:`coverage.numbits` module provides functions for working
with them.

- The reporting methods used to permanently apply their arguments to the
configuration of the Coverage object.  Now they no longer do.  The arguments
affect the operation of the method, but do not persist.

- A class named &quot;test_something&quot; no longer confuses the ``test_function``
dynamic context setting.  Fixes `issue 829`_.

- Fixed an unusual tokenizing issue with backslashes in comments.  Fixes
`issue 822`_.

- ``debug=plugin`` didn&#39;t properly support configuration or dynamic context
plugins, but now it does, closing `issue 834`_.

.. _issue 720: https://github.com/nedbat/coveragepy/issues/720
.. _issue 822: https://github.com/nedbat/coveragepy/issues/822
.. _issue 834: https://github.com/nedbat/coveragepy/issues/834
.. _issue 829: https://github.com/nedbat/coveragepy/issues/829
.. _issue 846: https://github.com/nedbat/coveragepy/issues/846


.. _changes_50a6:

5.0a6

----------------------------

- Reporting on contexts. Big thanks to Stephan Richter and Albertas Agejevas
for the contribution.

- The ``--contexts`` option is available on the ``report`` and ``html``
 commands.  It&#39;s a comma-separated list of shell-style wildcards, selecting
 the contexts to report on.  Only contexts matching one of the wildcards
 will be included in the report.

- The ``--show-contexts`` option for the ``html`` command adds context
 information to each covered line.  Hovering over the &quot;ctx&quot; marker at the
 end of the line reveals a list of the contexts that covered the line.

- Database changes:

- Line numbers are now stored in a much more compact way.  For each file and
 context, a single binary string is stored with a bit per line number.  This
 greatly improves memory use, but makes ad-hoc use difficult.

- Dynamic contexts with no data are no longer written to the database.

- SQLite data storage is now faster.  There&#39;s no longer a reason to keep the
 JSON data file code, so it has been removed.

- Changes to the :class:`.CoverageData` interface:

- The new :meth:`.CoverageData.dumps` method serializes the data to a string,
 and a corresponding :meth:`.CoverageData.loads` method reconstitutes this
 data.  The format of the data string is subject to change at any time, and
 so should only be used between two installations of the same version of
 coverage.py.

- The :meth:`CoverageData constructor&lt;.CoverageData.__init__&gt;` has a new
 argument, `no_disk` (default: False).  Setting it to True prevents writing
 any data to the disk.  This is useful for transient data objects.

- Added the classmethod :meth:`.Coverage.current` to get the latest started
Coverage instance.

- Multiprocessing support in Python 3.8 was broken, but is now fixed.  Closes
`issue 828`_.

- Error handling during reporting has changed slightly.  All reporting methods
now behave the same.  The ``--ignore-errors`` option keeps errors from
stopping the reporting, but files that couldn&#39;t parse as Python will always
be reported as warnings.  As with other warnings, you can suppress them with
the ``[run] disable_warnings`` configuration setting.

- Coverage.py no longer fails if the user program deletes its current
directory. Fixes `issue 806`_.  Thanks, Dan Hemberger.

- The scrollbar markers in the HTML report now accurately show the highlighted
lines, regardless of what categories of line are highlighted.

- The hack to accommodate ShiningPanda_ looking for an obsolete internal data
file has been removed, since ShiningPanda 0.22 fixed it four years ago.

- The deprecated `Reporter.file_reporters` property has been removed.

.. _ShiningPanda: https://wiki.jenkins.io/display/JENKINS/ShiningPanda+Plugin
.. _issue 806: https://github.com/nedbat/coveragepy/pull/806
.. _issue 828: https://github.com/nedbat/coveragepy/issues/828


.. _changes_50a5:

5.0a5

----------------------------

- Drop support for Python 3.4

- Dynamic contexts can now be set two new ways, both thanks to Justas
Sadzevičius.

- A plugin can implement a ``dynamic_context`` method to check frames for
 whether a new context should be started.  See
 :ref:`dynamic_context_plugins` for more details.

- Another tool (such as a test runner) can use the new
 :meth:`.Coverage.switch_context` method to explicitly change the context.

- The ``dynamic_context = test_function`` setting now works with Python 2
old-style classes, though it only reports the method name, not the class it
was defined on.  Closes `issue 797`_.

- ``fail_under`` values more than 100 are reported as errors.  Thanks to Mike
Fiedler for closing `issue 746`_.

- The &quot;missing&quot; values in the text output are now sorted by line number, so
that missing branches are reported near the other lines they affect. The
values used to show all missing lines, and then all missing branches.

- Access to the SQLite database used for data storage is now thread-safe.
Thanks, Stephan Richter. This closes `issue 702`_.

- Combining data stored in SQLite is now about twice as fast, fixing `issue
761`_.  Thanks, Stephan Richter.

- The ``filename`` attribute on :class:`.CoverageData` objects has been made
private.  You can use the ``data_filename`` method to get the actual file
name being used to store data, and the ``base_filename`` method to get the
original filename before parallelizing suffixes were added.  This is part of
fixing `issue 708`_.

- Line numbers in the HTML report now align properly with source lines, even
when Chrome&#39;s minimum font size is set, fixing `issue 748`_.  Thanks Wen Ye.

.. _issue 702: https://github.com/nedbat/coveragepy/issues/702
.. _issue 708: https://github.com/nedbat/coveragepy/issues/708
.. _issue 746: https://github.com/nedbat/coveragepy/issues/746
.. _issue 748: https://github.com/nedbat/coveragepy/issues/748
.. _issue 761: https://github.com/nedbat/coveragepy/issues/761
.. _issue 797: https://github.com/nedbat/coveragepy/issues/797


.. _changes_50a4:

5.0a4

----------------------------

- You can specify the command line to run your program with the ``[run]
command_line`` configuration setting, as requested in `issue 695`_.

- Coverage will create directories as needed for the data file if they don&#39;t
exist, closing `issue 721`_.

- The ``coverage run`` command has always adjusted the first entry in sys.path,
to properly emulate how Python runs your program.  Now this adjustment is
skipped if sys.path[0] is already different than Python&#39;s default.  This
fixes `issue 715`_.

- Improvements to context support:

- The &quot;no such table: meta&quot; error is fixed.: `issue 716`_.

- Combining data files is now much faster.

- Python 3.8 (as of today!) passes all tests.

.. _issue 695: https://github.com/nedbat/coveragepy/issues/695
.. _issue 715: https://github.com/nedbat/coveragepy/issues/715
.. _issue 716: https://github.com/nedbat/coveragepy/issues/716
.. _issue 721: https://github.com/nedbat/coveragepy/issues/721


.. _changes_50a3:

5.0a3

----------------------------

- Context support: static contexts let you specify a label for a coverage run,
which is recorded in the data, and retained when you combine files.  See
:ref:`contexts` for more information.

- Dynamic contexts: specifying ``[run] dynamic_context = test_function`` in the
config file will record the test function name as a dynamic context during
execution.  This is the core of &quot;Who Tests What&quot; (`issue 170`_).  Things to
note:

- There is no reporting support yet.  Use SQLite to query the .coverage file
 for information.  Ideas are welcome about how reporting could be extended
 to use this data.

- There&#39;s a noticeable slow-down before any test is run.

- Data files will now be roughly N times larger, where N is the number of
 tests you have.  Combining data files is therefore also N times slower.

- No other values for ``dynamic_context`` are recognized yet.  Let me know
 what else would be useful.  I&#39;d like to use a pytest plugin to get better
 information directly from pytest, for example.

.. _issue 170: https://github.com/nedbat/coveragepy/issues/170

- Environment variable substitution in configuration files now supports two
syntaxes for controlling the behavior of undefined variables: if ``VARNAME``
is not defined, ``${VARNAME?}`` will raise an error, and ``${VARNAME-default
value}`` will use &quot;default value&quot;.

- Partial support for Python 3.8, which has not yet released an alpha. Fixes
`issue 707`_ and `issue 714`_.

.. _issue 707: https://github.com/nedbat/coveragepy/issues/707
.. _issue 714: https://github.com/nedbat/coveragepy/issues/714


.. _changes_50a2:

5.0a2

----------------------------

- Coverage&#39;s data storage has changed.  In version 4.x, .coverage files were
basically JSON.  Now, they are SQLite databases.  This means the data file
can be created earlier than it used to.  A large amount of code was
refactored to support this change.

- Because the data file is created differently than previous releases, you
 may need ``parallel=true`` where you didn&#39;t before.

- The old data format is still available (for now) by setting the environment
 variable COVERAGE_STORAGE=json. Please tell me if you think you need to
 keep the JSON format.

- The database schema is guaranteed to change in the future, to support new
 features.  I&#39;m looking for opinions about making the schema part of the
 public API to coverage.py or not.

- Development moved from `Bitbucket`_ to `GitHub`_.

- HTML files no longer have trailing and extra whitespace.

- The sort order in the HTML report is stored in local storage rather than
cookies, closing `issue 611`_.  Thanks, Federico Bond.

- pickle2json, for converting v3 data files to v4 data files, has been removed.

.. _Bitbucket: https://bitbucket.org/ned/coveragepy
.. _GitHub: https://github.com/nedbat/coveragepy

.. _issue 611: https://github.com/nedbat/coveragepy/issues/611


.. _changes_50a1:

5.0a1

----------------------------

- Coverage.py no longer supports Python 2.6 or 3.3.

- The location of the configuration file can now be specified with a
``COVERAGE_RCFILE`` environment variable, as requested in `issue 650`_.

- Namespace packages are supported on Python 3.7, where they used to cause
TypeErrors about path being None. Fixes `issue 700`_.

- A new warning (``already-imported``) is issued if measurable files have
already been imported before coverage.py started measurement.  See
:ref:`cmd_warnings` for more information.

- Running coverage many times for small runs in a single process should be
faster, closing `issue 625`_.  Thanks, David MacIver.

- Large HTML report pages load faster.  Thanks, Pankaj Pandey.

.. _issue 625: https://bitbucket.org/ned/coveragepy/issues/625/lstat-dominates-in-the-case-of-small
.. _issue 650: https://bitbucket.org/ned/coveragepy/issues/650/allow-setting-configuration-file-location
.. _issue 700: https://github.com/nedbat/coveragepy/issues/700


.. _changes_454:

Links

PyPI: https://pypi.org/project/coverage
Changelog: https://pyup.io/changelogs/coverage/
Repo: https://github.com/nedbat/coveragepy

Update cryptography from 2.7 to 2.8.

Changelog

2.8

~~~~~~~~~~~~~~~~

* Updated Windows, macOS, and ``manylinux1`` wheels to be compiled with
OpenSSL 1.1.1d.
* Added support for Python 3.8.
* Added class methods
:meth:`Poly1305.generate_tag
&lt;cryptography.hazmat.primitives.poly1305.Poly1305.generate_tag&gt;`
and
:meth:`Poly1305.verify_tag
&lt;cryptography.hazmat.primitives.poly1305.Poly1305.verify_tag&gt;`
for Poly1305 sign and verify operations.
* Deprecated support for OpenSSL 1.0.1. Support will be removed in
``cryptography`` 2.9.
* We now ship ``manylinux2010`` wheels in addition to our ``manylinux1``
wheels.
* Added support for ``ed25519`` and ``ed448`` keys in the
:class:`~cryptography.x509.CertificateBuilder`,
:class:`~cryptography.x509.CertificateSigningRequestBuilder`,
:class:`~cryptography.x509.CertificateRevocationListBuilder` and
:class:`~cryptography.x509.ocsp.OCSPResponseBuilder`.
* ``cryptography`` no longer depends on ``asn1crypto``.
* :class:`~cryptography.x509.FreshestCRL` is now allowed as a
:class:`~cryptography.x509.CertificateRevocationList` extension.

.. _v2-7:

Links

PyPI: https://pypi.org/project/cryptography
Changelog: https://pyup.io/changelogs/cryptography/
Repo: https://github.com/pyca/cryptography

Update pytest from 5.1.2 to 5.4.1.

The bot wasn't able to find a changelog for this release. Got an idea?

Links

PyPI: https://pypi.org/project/pytest
Homepage: https://docs.pytest.org/en/latest/

Update pytest-runner from 5.1 to 5.2.

Changelog

5.2

===

* 50: This project is deprecated.

Links

PyPI: https://pypi.org/project/pytest-runner
Changelog: https://pyup.io/changelogs/pytest-runner/
Repo: https://github.com/pytest-dev/pytest-runner/

pyup-bot added 11 commits April 1, 2020 11:34

Update pyyaml from 5.1.2 to 5.3.1

f388cce

Update pyyaml from 5.1.2 to 5.3.1

2683bff

Update wheel from 0.33.6 to 0.34.2

28a8326

Update watchdog from 0.9.0 to 0.10.2

11a15e2

Update flake8 from 3.7.8 to 3.7.9

ebb22f6

Update tox from 3.13.2 to 3.14.6

f1d6e83

Update sphinx from 2.2.0 to 2.4.4

7d9e932

Update coverage from 4.5.4 to 5.0.4

cd5488f

Update cryptography from 2.7 to 2.8

18828be

Update pytest from 5.1.2 to 5.4.1

622c498

Update pytest-runner from 5.1 to 5.2

37df484

pyup-bot mentioned this pull request Apr 1, 2020

Scheduled monthly dependency update for March #59

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Scheduled monthly dependency update for April #60

Scheduled monthly dependency update for April #60

pyup-bot commented Apr 1, 2020

Scheduled monthly dependency update for April #60

Are you sure you want to change the base?

Scheduled monthly dependency update for April #60

Conversation

pyup-bot commented Apr 1, 2020

Update PyYAML from 5.1.2 to 5.3.1.

Update wheel from 0.33.6 to 0.34.2.

0.34.2

0.34.1

0.34.0

Update watchdog from 0.9.0 to 0.10.2.

0.10.2

0.10.1

0.10.0

Update flake8 from 3.7.8 to 3.7.9.

Update tox from 3.13.2 to 3.14.6.

Update Sphinx from 2.2.0 to 2.4.4.

2.4.4

2.4.3

2.4.2

2.4.1

2.4.0

2.3.1

2.3.0

2.2.2

2.2.1

Update coverage from 4.5.4 to 5.0.4.

5.0.4

5.0.3

5.0.2

5.0.1

5.0

5.0b2

5.0b1

5.0a8

5.0a7

5.0a6

5.0a5

5.0a4

5.0a3

5.0a2

5.0a1

Update cryptography from 2.7 to 2.8.

2.8

Update pytest from 5.1.2 to 5.4.1.

Update pytest-runner from 5.1 to 5.2.

5.2