Update other-inverters.md - fix typos

docs/other-inverters.md

@@ -1,6 +1,6 @@
 ## Other Inverters
 
-PredBat was originally written for GivEnergy inverters using the GivTCP integration but this is now being extended to othert models:
+PredBat was originally written for GivEnergy inverters using the GivTCP integration but this is now being extended to other models:
 
 - Solis Hybrid inverters [Solax Modbus integration](https://github.com/wills106/homeassistant-solax-modbus)
 - Solax Gen4 inverters [Solax Modbus integration](https://github.com/wills106/homeassistant-solax-modbus) in Modbus Power Control Mode\*
@@ -15,12 +15,12 @@ Note that support for all these inverters is in various stages of development. P
 To run PredBat with Solis hybrid inverters, follow the following steps:
 
 1. Install PredBat as per the [Installation Summary](installation-summary.md)
-2. Ensure that you have the Solax Modbus integration running. There are a number of entities which this integration disables by defaul that you will need to enable via the Home Assistant GUI:
+2. Ensure that you have the Solax Modbus integration running. There are a number of entities which this integration disables by default that you will need to enable via the Home Assistant GUI:
 
    | Name                          | Description     |
    | :---------------------------- | :-------------- |
    | `sensor.solisx_rtc`           | Real Time Clock |
    | `sensor.solisx_battery_power` | Battery Power   |
 
-3. Instead of `apps.yaml` use `ginlong_solis.yaml` from this Repo as your starting template. The majority of settings should be correct but please cleck. You will need to un-comment the `template` line to enable it. Save it to the `config/appdaemon/apps/predbat/config` folder.
+3. Instead of `apps.yaml` use `ginlong_solis.yaml` from this Repo as your starting template. The majority of settings should be correct but please check. You will need to un-comment the `template` line to enable it. Save it to the `config/appdaemon/apps/predbat/config` folder.
 4. Ensure that the inverter is set Control Mode 35 - on the Solax integration this is `Timed Charge/Discharge`. If you want to use the `Reserve` functionality within PredBat you will need to select `Backup/Reserve` (code 51) instead but be aware that this is not fully tested. In due course these mode settings will be incorporated into the code.