Merge pull request #591 from SinKy-Yan/main

con4a，组装中英文文档

docs/hardware/en/lichee/th1520/lcon4a/3_images.md

@@ -0,0 +1,14 @@
+# Sipeed Official Image
+
+The Sipeed official image is modified and adapted based on the Debian system.
+
+The default image account and password configuration is as follows:
+Account: `sipeed`, Password: `licheepi`;
+Account: `debian`, Password: `debian`;
+The root account has no password set by default.
+
+Image Download:
+[Baidu Netdisk](https://pan.baidu.com/s/19ShinFf8FMtqSsJGSAMfpA) Extraction code: 6wqg
+[mega Netdisk](https://mega.nz/folder/p0oiwCqI#EFGgwRnoB9mX14pKI2pu4Q)
+
+Please refer to [Burning Image] for the burning method.

docs/hardware/en/lichee/th1520/lcon4a/4_burn_image.md

@@ -0,0 +1,19 @@
+* # **Burning Image**
+
+1. Remove the SSD back cover
+2. Find the BOOT button and RST button
+
+![boot_and_rst_key](burn_image/boot_and_rst_key.png)
+
+1. Hold down the BOOT button, then press the power button on the keyboard to start up, and then connect the typec port to another machine.
+
+![typec_connect](burn_image/typec_connect.png)
+
+1. Download the image for burning on another machine: [Click here to download](https://wiki.sipeed.com/hardware/zh/lichee/th1520/lcon4a/3_images.html)
+2. On another machine, execute `fastboot flash ram u-boot-with-spl-console.bin`
+3. On another machine, execute `fastboot reboot`
+4. On another machine, execute `fastboot flash uboot u-boot-with-spl-console.bin`
+5. On another machine, execute `fastboot flash boot boot.ext4`
+6. On another machine, execute `fastboot flash root root.ext4`
+7. Press the RST button next to BOOT to restart the notebook.
+

docs/hardware/en/lichee/th1520/lcon4a/setup_guide.md

@@ -0,0 +1,94 @@
+---
+title: setup—guide
+keywords: Lichee, TH1520, Console, RISCV,
+update:
+  - date: 2023-12-19
+    version: v1.0
+    author: sinky
+    content:
+      - Release docs
+---
+
+For customers who purchased Package A, the following accessories are included. Please check whether all the product accessories have been received:
+
+- Back case x1
+- SSD cover x1
+- SSD cover screw x1
+- Screwdriver x1
+- Thermal pad x2
+- Heat pipe x1
+- Back cover screws x6
+
+![Accessories](assets/lcon4a/配件.jpg)
+
+Please prepare the cross-head screwdriver as shown in the picture on your own.
+
+## Assembly Steps
+
+1. Insert the core board into the motherboard.
+   Place one of the thermal pads at the core position of TH1520 as shown in the picture below.
+
+   ![Installing Thermal Pad 1](assets/lcon4a/安装导热垫1.jpg)
+
+2. Peel off the release film from the thermal pad.
+
+   ![Installing Thermal Pad 2](assets/lcon4a/安装导热垫2.jpg)
+
+3. Cut another thermal pad in half for later use.
+
+4. Place the heat pipe between the core board and the fan **(as close to the fan as possible to ensure the cooling effect)** as shown in the picture below.
+
+   ![Placing Heat Pipe](assets/lcon4a/放置铜管.jpg)
+
+5. Place the two cut thermal pads on the heat pipe to conduct the heat to the outer shell, as shown in the picture.
+
+   ![Placing Heat Pipe for Cooling](assets/lcon4a/放置铜管散热.jpg)
+
+   To ensure that the heat pipe is securely fixed, it is recommended to use tape to fix the middle part of the heat pipe.
+
+6. Insert the battery connection ribbon **(pay attention to the direction of the battery ribbon)**.
+
+   ![Connecting Battery Ribbon](assets/lcon4a/链接电池排线.png)
+
+7. Cover the back case, it is recommended to align the back first and then press it for convenience.
+
+   ![组装后盖1](assets/lcon4a/组装后盖1.jpg)
+
+   ![Assembling Back Cover 2](assets/lcon4a/组装后盖2.jpg)
+
+   **When buckling the other side, using a disassembly piece to assist can save more effort.**
+
+8. After buckling the back case, take out the 6 back cover screws and the screwdriver that come with the package, tighten the back cover fixing screws. It is recommended to press the back cover at the same time when tightening the screws to ensure that the buckle will not pop open.
+
+   ![Back Cover Fixing Screws](assets/lcon4a/后盖固定螺丝.jpg)
+
+   **Please note that the screws for fixing the SSD cover and the back cover are of different sizes.**
+   At this point, the assembly is complete, and you can start using it.
+
+## SSD Installation
+
+1. Use a cross screwdriver to remove the SSD cover.
+
+   ![Removing SSD Cover Screws](assets/lcon4a/取下SSD盖板螺丝.jpg)
+
+2. Prepare the NGFF interface 2242 size SSD.
+
+   ![SSD](assets/lcon4a/ssd.png)
+
+3. Unscrew the SSD fixing screw.
+
+   ![Removing SSD Fixing Screw](assets/lcon4a/取下ssd固定.jpg)
+
+4. Insert the SSD, **due to the small space, it is suggested to first put the SSD into the machine body, and then insert the SSD forcefully perpendicular to the interface**.
+
+   ![Inserting SSD](assets/lcon4a/放入ssd.jpg)
+
+   ![Inserting SSD](assets/lcon4a/插入ssd.jpg)
+
+5. After it is in place, screw on the SSD fixing screw, cover the SSD cover, and screw on the cover fixing screw.
+
+   ![Fixing SSD](assets/lcon4a/固定ssd.jpg)
+
+   ![Replacing SSD Cover](assets/lcon4a/装回ssd盖板.JPG)
+
+   ![Fixing SSD Cover](assets/lcon4a/固定SSD盖板.jpg)

docs/hardware/en/sidebar.yaml

@@ -116,6 +116,14 @@ items:
         -   label: Lichee Cluster 4A
             file: lichee/th1520/lc4a/lc4a.md
         -   label: Lichee Console 4A
+            items:
+            -   label: setup_guide
+                file: lichee/th1520/lcon4a/setup_guide.md
+            -   label: images
+                file: lichee/th1520/lcon4a/3_images.md
+            -   label: burn_image
+                file: lichee/th1520/lcon4a/4_burn_image.md
+
             file: lichee/th1520/lcon4a/lcon4a.md
         -   label: Lichee PI 4A
             items:
@@ -250,7 +258,7 @@ items:
         -   label: Tang Mega 138K Pro
             items:
             -   label: Introduction
-                file: tang/tang-mega-138k/mega-138k Pro.md
+                file: tang/tang-mega-138k/mega-138k-pro.md
             -   label: Install IDE
                 file: tang/Tang-Nano-Doc/install-the-ide.md
             -   label: Questions&Answers

docs/hardware/zh/lichee/th1520/lcon4a/setup_guide.md

@@ -0,0 +1,75 @@
+---
+title: 组装指南
+keywords:  Lichee, TH1520, Console, RISCV, 
+update:
+  - date: 2023-12-19
+    version: v1.0
+    author: sinky
+    content:
+      - 新建文档
+---
+
+**购买A套餐用户收到配件如下，请先核对收到的产品配件是否齐全**
+后壳x1、SSD盖板x1、SSD盖板螺丝x1、螺丝刀x1、导热垫x2、热管x1、后盖螺丝x6
+
+![配件](assets/lcon4a/配件.jpg)
+
+图中所示十字批头请自备
+
+# 组装步骤
+
+1. 将核心板插入主板
+    将其中一片导热垫置于下图所示TH1520核心位置。
+    ![安装导热垫1](assets/lcon4a/安装导热垫1.jpg)
+
+2. 剥离导热垫离型膜
+    ![安装导热垫2](assets/lcon4a/安装导热垫2.jpg)
+
+3. 将另一片导热垫从中间剪开备用
+
+4. 将热管放置于核心板和风扇中间**（尽量靠近风扇以保证散热效果）**如下图所示。
+    ![放置铜管](assets/lcon4a/放置铜管.jpg)
+
+5. 将剪开的两块散热垫放置于热管上，用于将热量导出至外壳，如图所示。![放置铜管散热](assets/lcon4a/放置铜管散热.jpg)
+
+  为保证热管固定牢固，建议使用胶带对热管中部进行固定。
+
+7. 插入电池连接排线**（注意电池排线的方向）**
+
+  <img src="assets/lcon4a/链接电池排线.png" alt="链接电池排线" style="zoom:150%;" />
+
+7. 将后壳盖回，此处建议先将后方对齐后按压较为方便。
+
+![组装后盖1](assets/lcon4a/组装后盖1.jpg)
+
+  ![组装后盖2](assets/lcon4a/组装后盖2.jpg)**扣合另一边时可使用拆机片辅助会更为省力**
+
+8. 将后壳扣回后，取出随机附带的6颗后盖螺丝及配送的螺丝刀，拧紧后壳固定螺丝，拧紧螺丝时建议同时按压后盖以保证卡扣不会弹开。
+    ![后盖固定螺丝](assets/lcon4a/后盖固定螺丝.jpg)
+    **此处应注意固定SSD盖板的螺丝与后壳固定螺丝为不同尺寸**
+    至此组装完成，开机使用即可
+
+  # SSD安装
+
+  1.使用十字螺丝刀取下SSD盖板
+
+![取下SSD盖板螺丝](assets/lcon4a/取下SSD盖板螺丝.jpg)
+
+  2.准备NGFF接口的2242尺寸SSD
+
+  ![ssd](assets/lcon4a/ssd.png)
+
+  3.旋下SSD固定螺丝
+  ![取下ssd固定](assets/lcon4a/取下ssd固定.jpg)
+
+  4.将SSD插入，**此处由于空间较小，建议先将SSD放入机身，垂直于接口用力将SSD插入**
+  ![放入ssd](assets/lcon4a/放入ssd.jpg)
+
+  ![插入ssd](assets/lcon4a/插入ssd.jpg)
+
+  5.插入到位后，旋上SSD固定螺丝，盖上SSD盖板，旋上盖板固定螺丝即可
+  ![固定ssd](assets/lcon4a/固定ssd.jpg)
+
+![装回ssd盖板](assets/lcon4a/装回ssd盖板.JPG)
+
+![固定SSD盖板](assets/lcon4a/固定SSD盖板.jpg)

docs/hardware/zh/sidebar.yaml

@@ -134,6 +134,8 @@ items:
             file: lichee/th1520/lc4a/lc4a.md
         -   label: Lichee Console 4A
             items:
+            -   label: 组装指南
+                file: lichee/th1520/lcon4a/setup_guide.md
             -   label: 镜像集合
                 file: lichee/th1520/lcon4a/3_images.md
             -   label: 烧录镜像
@@ -276,7 +278,7 @@ items:
         -   label: Tang Mega 138K Pro
             items:
             -   label: 板卡介绍
-                file: tang/tang-mega-138k/mega-138k.md
+                file: tang/tang-mega-138k/mega-138k-pro.md
             -   label: 安装 IDE
                 file: tang/Tang-Nano-Doc/get_started/install-the-ide.md
             -   label: 常见问题