Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Update README.md to match Makefile #3

Open
wants to merge 1 commit into
base: main
Choose a base branch
from
Open

Update README.md to match Makefile #3

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion examples/blink/README.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,7 +8,7 @@ This design alternatively blinks the red and green LEDs.
- Verify the device path at which the Signaloid C0-microSD device shows up in your operating system. In our example, the Signaloid C0-microSD device path is `/dev/disk4`.
- Verify that the device is in `Bootloader` mode (solid red LED).
- In case the device is not in `Bootloader` mode, you can switch its operation mode by running `make make flash DEVICE=<device-path>` and power-cycling the device.
- Run `make flash DEVICE=<device-path>`. Make sure to replace the `<device-path>` with the correct path of the C0-microSD. For example, if the device path is `/dev/disk4`, you will need to run `make program DEVICE=/dev/disk4`.
- Run `make flash DEVICE=<device-path>`. Make sure to replace the `<device-path>` with the correct path of the C0-microSD. For example, if the device path is `/dev/disk4`, you will need to run `make flash DEVICE=/dev/disk4`.


If the bitstream flashed successfully, you should see:
Expand Down