goto https://kinesiscorporation.github.io/Adv360-Pro-GUI/

ADV360-PRO-ZMK

To build Firmware in GitHub Actions

Setup

1. Fork this repo.
2. Enable GitHub Actions on your fork.

Build firmware

1. Push a commit to trigger the build.
2. Download the artifact.

Local building in a container

Setup

Software

Either Podman or Docker is required, Podman is preferred if both are present.
Make is also required

Windows specific

If compiling on Windows use WSL2 and Docker Docker Setup Guide.
Install make using sudo apt-get install make.
The repository can be cloned directly into the WSL2 instance or accessed through the C: mount point WSL provides by default (/mnt/c/path-to-repo).

Build firmware

1. Execute make.
2. Check the firmware directory for the latest firmware build.

Cleanup

The built docker container and compiled firmware files can be deleted with make clean.

Flashing firmware

Follow the programming instruction on page 8 of the Quick Start Guide to flash the firmware.

Other support

Further support resources can be found on Kinesis.com https://kinesis-ergo.com/support/kb360pro/#firmware-updates https://kinesis-ergo.com/support/kb360pro/#manuals