Skip to content

Files and instructions to print and assemble a case for Sipeed Maix Dock with a rotary encoder

Notifications You must be signed in to change notification settings

selfcustody/DockEncoderCase

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

6 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Maix Dock Enclosure for Krux Signer

Case for Maix Dock board with camera, display and a rotary encoder, intended to be used with Krux Signer

plot

Materials for building a Krux

  • Printed parts
  • Maix Dock with display and camera
  • Rotary Encoder Ky-040
  • 4 Screws for plastics (~2.5 mm) x 4mm
  • 4 M3 nuts
  • 4 M3 x 16mm Allen flat screws
  • 5 ~8cm thin wires
  • 1cm x 1cm x 1mm thieck adesive foam

Instructions

Print the stl files, clean and test fittings.

Solder wires between board and rotary encoder.

Encoder - Maix Dock
   GND <->  GND
     + <->  3V3
    SW <-> Pin 9
    DT <-> Pin 10
   CLK <-> Pin 11

Use the foam as a flexible spacer between camera and board. It will keep the camera slightly pressed against the enclosure. Carefully place the board, with camera on place and use 2 plastic screws in diagonal to fix the board and camera to the back enclosure.

plot

Put wires in place and use the other 2 plastic screws to mount the encoder.

plot

Put the display in place

plot

Put the front enclosure in place and fix it with M3 screws and Nuts

About

Files and instructions to print and assemble a case for Sipeed Maix Dock with a rotary encoder

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published