Pull bpf/for-next #216

The page-owner tracking code records stack traces during page allocation. To do this, it must do a memory allocation for the stack information from inside an existing memory allocation context. This internal allocation must obey the high level caller allocation constraints to avoid generating false positive warnings that have nothing to do with the code they are instrumenting/tracking (e.g. through lockdep reclaim state tracking) We also don't want recording stack traces to deplete emergency memory reserves - debug code is useless if it creates new issues that can't be replicated when the debug code is disabled. Switch the stack tracking allocation masking to use gfp_nested_mask() to address these issues. gfp_nested_mask() naturally strips GFP_ZONEMASK, too, which greatly simplifies this code. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Vlastimil Babka <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Cc: Andrey Konovalov <[email protected]> Cc: Marco Elver <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Bitops API is the very basic, and it's widely used by the kernel. But corresponding files are not maintained. Bitmaps actively use bit operations, and big share of bitops material already moves through the bitmap branch. I would like to take a closer look to bitops. This patch creates a BITOPS API record in the MAINTAINERS, and adds Rasmus as a reviewer, and myself as a maintainer of those files. CC: Rasmus Villemoes <[email protected]> Signed-off-by: Yury Norov <[email protected]>

The bitops.h is for bit related operations. The aligned_byte_mask() is about byte (or part of the machine word) operations, for which we have a separate header, move the mentioned macro to wordpart.h to consolidate similar operations. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Yury Norov <[email protected]>

Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Yury Norov <[email protected]>

These function are not used, remove these here. While here, remove the leading _ from the driver internal functions that do the same thing as the functions removed. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

This function is not used, remove this function. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

This is only used internal to the driver, move it out of the public header and into the driver file. While we are here, this is not used as a bitwise, so drop that and make it a simple enum type. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The mbox_kfifo_size can be changed at runtime, the sanity check on it's value should be done when it is used, not only once at init time. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The type of message sent using omap-mailbox is always u32. The definition of mbox_msg_t is uintptr_t which is wrong as that type changes based on the architecture (32bit vs 64bit). This type should have been defined as u32. Instead of making that change here, simply remove the header usage and fix the last couple users of the same in this driver. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The driver currently creates a new device class "mbox". Then for each mailbox adds a device to that class. This class provides no file operations provided for any userspace users of this device class. It may have been extended to be functional in our vendor tree at some point, but that is not the case anymore, nor does it matter for the upstream tree. Remove this device class and related functions and variables. This also allows us to switch to module_platform_driver() as there is nothing left to do in module_init(). Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Use device life-cycle managed runtime enable function to simplify probe and exit paths. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Currently the driver loops through all mailbox child nodes twice, once to read in data from each node, and again to make use of this data. Instead read the data and make use of it in one pass. This removes the need for several temporary data structures and reduces the complexity of this main loop in probe. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The mbox_controller struct is only needed in the probe function. Make it a local variable instead of storing a copy in omap_mbox_device to simplify that struct. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The driver stores a list of omap_mbox structs so it can later use it to lookup the mailbox names in of_xlate. This same information is already available in the mbox_controller passed into of_xlate. Simply use that data and remove the extra allocation and storage of the omap_mbox list. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

This function only checks if mbox_chan *chan is not NULL, but that cannot be the case and if it was returning NULL which is not later checked doesn't save us from this. The second check for chan->con_priv is completely redundant as if it was NULL we would return NULL just the same. Simply dereference con_priv directly and remove this function. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

It is much more clear to check if the hardware FIFO is full and return EBUSY if true. This allows us to also remove one level of indention from the core of this function. It also makes the similarities between omap_mbox_chan_send_noirq() and omap_mbox_chan_send() more obvious. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The kernel FIFO queue has a couple issues. The biggest issue is that it causes extra latency in a path that can be used in real-time tasks, such as communication with real-time remote processors. The whole FIFO idea itself looks to be a leftover from before the unified mailbox framework. The current mailbox framework expects mbox_chan_received_data() to be called with data immediately as it arrives. Remove the FIFO and pass the messages to the mailbox framework directly as part of a threaded IRQ handler. Signed-off-by: Andrew Davis <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Add bindings for the ARM MHUv3 Mailbox controller. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Add support for ARM MHUv3 mailbox controller. Support is limited to the MHUv3 Doorbell extension using only the PBX/MBX combined interrupts. Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

At least one IPI is used in TF-A for communication with PMC firmware. If this IPI needs to be used by other agents such as RPU then, IPI system interrupt can't be generated in mailbox driver. In such case TF-A generates SGI to mailbox driver for IPI notification. Signed-off-by: Tanmay Shah <[email protected]> Signed-off-by: Saeed Nowshadi <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Add MODULE_DEVICE_TABLE(), so this module could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown() will return 1 when pm runtime state is active, and we don't want to get the warning message in this case. So we change the return value < 0 for WARN_ON(). Fixes: 8afe816 ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend") Signed-off-by: Jason-JH.Lin <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

The only generic interface to execute asynchronously in the BH context is tasklet; however, it's marked deprecated and has some design flaws. To replace tasklets, BH workqueue support was recently added. A BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. Based on the work done by Tejun Heo <[email protected]> Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10 Signed-off-by: Allen Pais <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Add compatible for the Qualcomm MSM8974 APCS block. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Document the Inter-Processor Communication Controller on the SDX75 Platform. Signed-off-by: Rohit Agarwal <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Jassi Brar <[email protected]>

Stephen reported that he was unable to get the dsa_loop driver to get probed, and the reason ended up being because he had CONFIG_FIXED_PHY=y in his kernel configuration. As Masahiro explained it: "obj-m += dsa/" means everything under dsa/ must be modular. If there is a built-in object under dsa/ with CONFIG_NET_DSA=m, you cannot do "obj-$(CONFIG_NET_DSA) += dsa/". You need to change it back to "obj-y += dsa/". This was the case here whereby CONFIG_NET_DSA=m, and so the obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o rule is not executed and the DSA loop mdio_board info structure is not registered with the kernel, and eventually the device is simply not found. To preserve the intention of the original commit of limiting the amount of folder descending, conditionally descend into drivers/net/dsa when CONFIG_NET_DSA is enabled. Fixes: 227d720 ("dsa: simplify Kconfig symbols and dependencies") Reported-by: Stephen Langstaff <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The seg6_input() function is responsible for adding the SRH into a packet, delegating the operation to the seg6_input_core(). This function uses the skb_cow_head() to ensure that there is sufficient headroom in the sk_buff for accommodating the link-layer header. In the event that the skb_cow_header() function fails, the seg6_input_core() catches the error but it does not release the sk_buff, which will result in a memory leak. This issue was introduced in commit af3b515 ("ipv6: sr: fix BUG due to headroom too small after SRH push") and persists even after commit 7a3f5b0 ("netfilter: add netfilter hooks to SRv6 data plane"), where the entire seg6_input() code was refactored to deal with netfilter hooks. The proposed patch addresses the identified memory leak by requiring the seg6_input_core() function to release the sk_buff in the event that skb_cow_head() fails. Fixes: af3b515 ("ipv6: sr: fix BUG due to headroom too small after SRH push") Signed-off-by: Andrea Mayer <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The amt.sh requires smcrouted for multicasting routing. So, it starts smcrouted before forwarding tests. It must be stopped after all tests, but it isn't. To fix this issue, it kills smcrouted in the cleanup logic. Fixes: c08e8ba ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>

syzbot reported the following uninit-value access issue [1] nci_rx_work() parses received packet from ndev->rx_q. It should be validated header size, payload size and total packet size before processing the packet. If an invalid packet is detected, it should be silently discarded. Fixes: d24b035 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=d7b4dc6cd50410152534 [1] Signed-off-by: Ryosuke Yasuoka <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

This reverts commit daef47b. This framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h is causing build failures and warnings. Revert this change. Reported-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]>

This reverts commit 2c3b8f8. The framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h is reverted as it is causing build failures and warnings. Revert this change as this change depends on the framework change. Reported-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]>

This reverts commit c1457d9. The framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h is reverted as it is causing build failures and warnings. Revert this change as this change depends on the framework change. Reported-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]>

…/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a bug in the new ecc P521 code as well as a buggy fix in qat" * tag 'v6.10-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ecc - Prevent ecc_digits_from_bytes from reading too many bytes crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak

…nel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries New drivers: - Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support Improvements: - Serious cleanup of the recently merged aw9523 driver - Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single - A slew of device tree binding cleanups - Support a bus clock in the Samsung driver" * tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) pinctrl: bcm2835: Make pin freeing behavior configurable dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108 pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function dt-bindings: pinctrl: mediatek: mt7622: fix array properties pinctrl: samsung: drop redundant drvdata assignment pinctrl: samsung: support a bus clock dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function pinctrl: renesas: r8a779h0: Fix IRQ suffixes pinctrl: renesas: rzg2l: Remove extra space in function parameter dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901 pinctrl: pinconf-generic: print hex value pinctrl: realtek: fix module autoloading pinctrl: qcom: sm7150: fix module autoloading pinctrl: loongson2: fix module autoloading pinctrl: mediatek: fix module autoloading pinctrl: freescale: imx8ulp: fix module autoloading dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes ...

…rnel/git/wsa/linux Pull i2c updates from Wolfram Sang: "i2c core removes an argument from the i2c_mux_add_adapter() call to further deprecate class based I2C device instantiation. All users are converted, too. Other that that, Andi collected a number if I2C host driver patches. Those merges have their own description" * tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits) power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter() i2c: mux: Remove class argument from i2c_mux_add_adapter() i2c: synquacer: Fix an error handling path in synquacer_i2c_probe() i2c: acpi: Unbind mux adapters before delete i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() i2c: pxa: use 'time_left' variable with wait_event_timeout() i2c: s3c2410: use 'time_left' variable with wait_event_timeout() i2c: rk3x: use 'time_left' variable with wait_event_timeout() i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout() i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout() i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout() i2c: st: use 'time_left' variable with wait_for_completion_timeout() i2c: omap: use 'time_left' variable with wait_for_completion_timeout() i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout() i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout() i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout() i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout() i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout() ...

…inux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Lenovo SE10 platform Watchdog Driver - Other small fixes and improvements * tag 'linux-watchdog-6.10-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: LENOVO_SE10_WDT should depend on X86 && DMI watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe() watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin watchdog: add HAS_IOPORT dependencies watchdog/wdt-main: Use cpumask_of() to avoid cpumask var on stack watchdog: bd9576: Drop "always-running" property watchdog: mtx-1: drop driver owner assignment watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform

…l/git/jdelvare/staging Pull dmi updates from Jean Delvare: "Bug fixes: - KCFI violation in dmi-id - stop decoding on broken (short) DMI table entry New features: - print info about populated memory slots at boot" * tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: Add info message for number of populated and total memory slots firmware: dmi: Stop decoding on broken entry firmware: dmi-id: add a release callback function

…t/mips/linux Pull MIPS updates from Thomas Bogendoerfer: "Just cleanups and fixes" * tag 'mips_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (24 commits) MIPS: Take in account load hazards for HI/LO restoring MIPS: SGI-IP27: use WARN_ON() output MIPS: SGI-IP27: fix -Wunused-variable in arch_init_irq() MIPS: SGI-IP27: micro-optimize arch_init_irq() mips: dts: ralink: mt7621: reorder the attributes of the root node mips: dts: ralink: mt7621: reorder pci?_phy attributes mips: dts: ralink: mt7621: reorder pcie node attributes and children mips: dts: ralink: mt7621: reorder ethernet node attributes and kids mips: dts: ralink: mt7621: reorder gic node attributes mips: dts: ralink: mt7621: reorder mmc node attributes mips: dts: ralink: mt7621: move pinctrl and sort its children mips: dts: ralink: mt7621: reorder spi0 node attributes mips: dts: ralink: mt7621: reorder i2c node attributes mips: dts: ralink: mt7621: reorder gpio node attributes mips: dts: ralink: mt7621: reorder sysc node attributes mips: dts: ralink: mt7621: reorder mmc regulator attributes mips: dts: ralink: mt7621: reorder cpuintc node attributes mips: dts: ralink: mt7621: reorder cpu node attributes MIPS: Add prototypes for plat_post_relocation() and relocate_kernel() MIPS: Octeon: Add PCIe link status check ...

…ers/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) * tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping: dma: fix DMA sync for drivers not calling dma_set_mask*() xsk: use generic DMA sync shortcut instead of a custom one page_pool: check for DMA sync shortcut earlier page_pool: don't use driver-set flags field directly page_pool: make sure frag API fields don't span between cachelines iommu/dma: avoid expensive indirect calls for sync operations dma: avoid redundant calls for sync operations dma: compile-out DMA sync op calls when not used iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Documentation/core-api: add swiotlb documentation

Most of the people prefer: return ret < 0 ? ret: 0; than: return min(ret, 0); Let's tweak the cocci file to ignore those lines completely. Signed-off-by: Ricardo Ribalda <[email protected]> Signed-off-by: Julia Lawall <[email protected]>

s/does not use unnecessary/do not unnecessarily use/ Signed-off-by: Thorsten Blum <[email protected]> Signed-off-by: Julia Lawall <[email protected]>

…nux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: - reduce overhead of fsnotify infrastructure when no permission events are in use - a few small cleanups * tag 'fsnotify_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: fix UAF from FS_ERROR event on a shutting down filesystem fsnotify: optimize the case of no permission event watchers fsnotify: use an enum for group priority constants fsnotify: move s_fsnotify_connectors into fsnotify_sb_info fsnotify: lazy attach fsnotify_sb_info state to sb fsnotify: create helper fsnotify_update_sb_watchers() fsnotify: pass object pointer and type to fsnotify mark helpers fanotify: merge two checks regarding add of ignore mark fsnotify: create a wrapper fsnotify_find_inode_mark() fsnotify: create helpers to get sb and connp from object fsnotify: rename fsnotify_{get,put}_sb_connectors() fsnotify: Avoid -Wflex-array-member-not-at-end warning fanotify: remove unneeded sub-zero check for unsigned value

This reverts commit e659522. These kinds of patches are only making the code worse. Compilers don't care about the unnecessary check, but removing it makes the code less obvious to a human. The declaration of 'len' is more than 80 lines earlier, so a human won't easily see that 'len' is of an unsigned type, so to a human the range check that checks against zero is much more explicit and obvious. Any tool that complains about a range check like this just because the variable is unsigned is actively detrimental, and should be ignored. Signed-off-by: Linus Torvalds <[email protected]>

dm-integrity could set discard_granularity lower than the logical block size. This could result in failures when sending discard requests to dm-integrity. This fix is needed for kernels prior to 6.10. Signed-off-by: Mikulas Patocka <[email protected]> Reported-by: Eric Wheeler <[email protected]> Cc: [email protected] # <= 6.9 Signed-off-by: Mike Snitzer <[email protected]>

…rnel/git/jack/linux-fs Pull isofs, udf, quota, ext2, and reiserfs updates from Jan Kara: - convert isofs to the new mount API - cleanup isofs Makefile - udf conversion to folios - some other small udf cleanups and fixes - ext2 cleanups - removal of reiserfs .writepage method - update reiserfs README file * tag 'fs_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: isofs: Use *-y instead of *-objs in Makefile ext2: Remove LEGACY_DIRECT_IO dependency isofs: Remove calls to set/clear the error flag ext2: Remove call to folio_set_error() udf: Use a folio in udf_write_end() udf: Convert udf_page_mkwrite() to use a folio udf: Convert udf_symlink_getattr() to use a folio udf: Convert udf_adinicb_readpage() to udf_adinicb_read_folio() udf: Convert udf_expand_file_adinicb() to use a folio udf: Convert udf_write_begin() to use a folio udf: Convert udf_symlink_filler() to use a folio reiserfs: Trim some README bits quota: fix to propagate error of mark_dquot_dirty() to caller reiserfs: Convert to writepages udf: udftime: prevent overflow in udf_disk_stamp_to_time() ext2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method udf: replace deprecated strncpy/strcpy with strscpy udf: Remove second semicolon isofs: convert isofs to use the new mount API fs: quota: use group allocation of per-cpu counters API

Commit 4f563a6 ("block: add a max_user_discard_sectors queue limit") changed block core to set max_discard_sectors to: min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors) Since commit 1c0e720 ("dm: use queue_limits_set") it was reported dm-thinp was failing in a few fstests (generic/347 and generic/405) with the first WARN_ON_ONCE in dm_cell_key_has_valid_range() being reported, e.g.: WARNING: CPU: 1 PID: 30 at drivers/md/dm-bio-prison-v1.c:128 dm_cell_key_has_valid_range+0x3d/0x50 blk_set_stacking_limits() sets max_user_discard_sectors to UINT_MAX, so given how block core now sets max_discard_sectors (detailed above) it follows that blk_stack_limits() stacks up the underlying device's max_hw_discard_sectors and max_discard_sectors is set to match it. If max_hw_discard_sectors exceeds dm's BIO_PRISON_MAX_RANGE, then dm_cell_key_has_valid_range() will trigger the warning with: WARN_ON_ONCE(key->block_end - key->block_begin > BIO_PRISON_MAX_RANGE) Aside from this warning, the discard will fail. Fix this and other DM issues by governing discard support in terms of max_hw_discard_sectors instead of max_discard_sectors. Reported-by: Theodore Ts'o <[email protected]> Fixes: 1c0e720 ("dm: use queue_limits_set") Signed-off-by: Mike Snitzer <[email protected]>

…fs-linux Pull xfs updates from Chandan Babu: "Online repair feature continues to be expanded. Also, we now support delayed allocation for realtime devices which have an extent size that is equal to filesystem's block size. New code: - Introduce Parent Pointer extended attribute for inodes - Bring back delalloc support for realtime devices which have an extent size that is equal to filesystem's block size - Improve performance of log incompat feature handling Online Repair: - Implement atomic file content exchanges i.e. exchange ranges of bytes between two files atomically - Create temporary files to repair file-based metadata. This uses atomic file content exchange facility to swap file fork mappings between the temporary file and the metadata inode - Allow callers of directory/xattr code to set an explicit owner number to be written into the header fields of any new blocks that are created. This is required to avoid walking every block of the new structure and modify their ownership during online repair - Repair more data structures: - Extended attributes - Inode unlinked state - Directories - Symbolic links - AGI's unlinked inode list - Parent pointers - Move Orphan files to lost and found directory - Fixes for Inode repair functionality - Introduce a new sub-AG FITRIM implementation to reduce the duration for which the AGF lock is held - Updates for the design documentation - Use Parent Pointers to assist in checking directories, parent pointers, extended attributes, and link counts Fixes: - Prevent userspace from reading invalid file data due to incorrect. updation of file size when performing a non-atomic clone operation - Minor fixes to online repair - Fix confusing return values from xfs_bmapi_write() - Fix an out of bounds access due to incorrect h_size during log recovery - Defer upgrading the extent counters in xfs_reflink_end_cow_extent() until we know we are going to modify the extent mapping - Remove racy access to if_bytes check in xfs_reflink_end_cow_extent() - Fix sparse warnings Cleanups: - Hold inode locks on all files involved in a rename until the completion of the operation. This is in preparation for the parent pointers patchset where parent pointers are applied in a separate chained update from the actual directory update - Compile out v4 support when disabled - Cleanup xfs_extent_busy_clear() - Remove unused flags and fields from struct xfs_da_args - Remove definitions of unused functions - Improve extended attribute validation - Add higher level directory operations helpers to remove duplication of code - Cleanup quota (un)reservation interfaces" * tag 'xfs-6.10-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (221 commits) xfs: simplify iext overflow checking and upgrade xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent xfs: upgrade the extent counters in xfs_reflink_end_cow_extent later xfs: xfs_quota_unreserve_blkres can't fail xfs: consolidate the xfs_quota_reserve_blkres definitions xfs: clean up buffer allocation in xlog_do_recovery_pass xfs: fix log recovery buffer allocation for the legacy h_size fixup xfs: widen flags argument to the xfs_iflags_* helpers xfs: minor cleanups of xfs_attr3_rmt_blocks xfs: create a helper to compute the blockcount of a max sized remote value xfs: turn XFS_ATTR3_RMT_BUF_SPACE into a function xfs: use unsigned ints for non-negative quantities in xfs_attr_remote.c xfs: do not allocate the entire delalloc extent in xfs_bmapi_write xfs: fix xfs_bmap_add_extent_delay_real for partial conversions xfs: remove the xfs_iext_peek_prev_extent call in xfs_bmapi_allocate xfs: pass the actual offset and len to allocate to xfs_bmapi_allocate xfs: don't open code XFS_FILBLKS_MIN in xfs_bmapi_write xfs: lift a xfs_valid_startblock into xfs_bmapi_allocate xfs: remove the unusued tmp_logflags variable in xfs_bmapi_allocate xfs: fix error returns from xfs_bmapi_write ...

…ernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've tried to address some performance issues on zoned storage such as direct IO and write_hints. In addition, we've migrated some IO paths using folio. Meanwhile, there are multiple bug fixes in the compression paths, sanity check conditions, and error handlers. Enhancements: - allow direct io of pinned files for zoned storage - assign the write hint per stream by default - convert read paths and test_writeback to folio - avoid allocating WARM_DATA segment for direct IO Bug fixes: - fix false alarm on invalid block address - fix to add missing iput() in gc_data_segment() - fix to release node block count in error path of f2fs_new_node_page() - compress: - don't allow unaligned truncation on released compress inode - cover {reserve,release}_compress_blocks() w/ cp_rwsem lock - fix error path of inc_valid_block_count() - fix to update i_compr_blocks correctly - fix block migration when section is not aligned to pow2 - don't trigger OPU on pinfile for direct IO - fix to do sanity check on i_xattr_nid in sanity_check_inode() - write missing last sum blk of file pinning section - clear writeback when compression failed - fix to adjust appropirate defragment pg_end As usual, there are several minor code clean-ups, and fixes to manage missing corner cases in the error paths" * tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits) f2fs: initialize last_block_in_bio variable f2fs: Add inline to f2fs_build_fault_attr() stub f2fs: fix some ambiguous comments f2fs: fix to add missing iput() in gc_data_segment() f2fs: allow dirty sections with zero valid block for checkpoint disabled f2fs: compress: don't allow unaligned truncation on released compress inode f2fs: fix to release node block count in error path of f2fs_new_node_page() f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock f2fs: compress: fix error path of inc_valid_block_count() f2fs: compress: fix typo in f2fs_reserve_compress_blocks() f2fs: compress: fix to update i_compr_blocks correctly f2fs: check validation of fault attrs in f2fs_build_fault_attr() f2fs: fix to limit gc_pin_file_threshold f2fs: remove unused GC_FAILURE_PIN f2fs: use f2fs_{err,info}_ratelimited() for cleanup f2fs: fix block migration when section is not aligned to pow2 f2fs: zone: fix to don't trigger OPU on pinfile for direct IO f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode() f2fs: fix to avoid allocating WARM_DATA segment for direct IO f2fs: remove redundant parameter in is_next_segment_free() ...

Commit 2fd001c ("arch: Rename fbdev header and source files") renames the video source files under arch/ such that they do not refer to fbdev any longer. The new files named video.o conflict with ACPI's video.ko module. Modprobing the ACPI module can then fail with warnings about missing symbols, as shown below. (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_unregister (err -2) (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register_backlight (err -2) (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol __acpi_video_get_backlight_type (err -2) (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register (err -2) Fix the issue by renaming the architecture's video.o to video-common.o. Reported-by: Chaitanya Kumar Borah <[email protected]> Closes: https://lore.kernel.org/intel-gfx/[email protected]/T/#t Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: 2fd001c ("arch: Rename fbdev header and source files") Reviewed-by: Hans de Goede <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Arnd Bergmann <[email protected]>

…rg/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h and follow-on changes to cgroup and sgx test as they are causing build failures and warnings" * tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Revert "selftests/cgroup: Drop define _GNU_SOURCE" Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile" Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE"

Pull vfio updates from Alex Williamson: - The vfio fsl-mc bus driver has become orphaned. We'll consider removing it in future releases if a new maintainer isn't found (Alex Williamson) - Improved usage of opaque data in vfio-pci INTx handling, avoiding lookups of the eventfd through the interrupt and irqfd runtime paths (Alex Williamson) - Resolve an error path memory leak introduced in vfio-pci interrupt code (Ye Bin) - Addition of interrupt support for vfio devices exposed on the CDX bus, including a new MSI allocation helper and export of existing helpers for MSI alloc and free (Nipun Gupta) - A new vfio-pci variant driver supporting migration of Intel QAT VF devices for the GEN4 PFs (Xin Zeng & Yahui Cao) - Resolve a possibly circular locking dependency in vfio-pci by avoiding copy_to_user() from a PCI bus walk callback (Alex Williamson) - Trivial docs update to remove a duplicate semicolon (Foryun Ma) * tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio: vfio/pci: Restore zero affected bus reset devices warning vfio: remove an extra semicolon vfio/pci: Collect hot-reset devices to local buffer vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices vfio/cdx: add interrupt support genirq/msi: Add MSI allocation helper and export MSI functions vfio/pci: fix potential memory leak in vfio_intx_enable() vfio/pci: Pass eventfd context object through irqfd vfio/pci: Pass eventfd context to IRQ handler MAINTAINERS: Orphan vfio fsl-mc bus driver

…rnel/git/soc/soc Pull more SoC devicetree updates from Arnd Bergmann: "This is a follow-up to an earlier pull request for device tree changes, as three platform maintainers sent their contents too late to be included in the main set, but had not caused any further problems since then: - The Amlogic platform now containts support for two new SoC types, the A4 and A5 chips for audio applications. Both come with a reference board, and one more dts file gets addded for the combination of the MNT Reform Laptop with the BPI-CM4 CPU module - The ASpeed platform adds support for six addititional server platforms that use ast2500 or ast2600 as their BMC, while another one gets removed - The RISC-V platforms from Microchip, Starfive and and T-HEAD get additional features for existing hardware, plus the addition of the Milk-V Mars based on the StarFive VisionFive v2 board" * tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits) riscv: dts: microchip: add pac1934 power-monitor to icicle riscv: dts: thead: Fix node ordering in TH1520 device tree ARM: dts: aspeed: Add ASRock E3C256D4I BMC dt-bindings: arm: aspeed: document ASRock E3C256D4I dt-bindings: trivial-devices: add isil,isl69269 ARM: dts: aspeed: x4tf: Add dts for asus x4tf project dt-bindings: arm: aspeed: add ASUS X4TF board ARM: dts: aspeed: Remove Facebook Cloudripper dts ARM: dts: aspeed: drop unused ref_voltage ADC property ARM: dts: aspeed: harma: correct Mellanox multi-host property ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property ARM: dts: aspeed: Modify I2C bus configuration ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name ...

…rnel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "These are a few cross-architecture cleanup patches: - separate out fbdev support from the asm/video.h contents that may be used by either the old fbdev drivers or the newer drm display code (Thomas Zimmermann) - cleanups for the generic bitops code and asm-generic/bug.h (Thorsten Blum) - remove the orphaned include/asm-generic/page.h header that used to be included by long-removed mmu-less architectures (me)" * tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: Fix name collision with ACPI's video.o bug: Improve comment asm-generic: remove unused asm-generic/page.h arch: Rename fbdev header and source files arch: Remove struct fb_info from video helpers arch: Select fbdev helpers with CONFIG_VIDEO bitops: Change function return types from long to int

…el/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "One patch slightly improves the text in a comment. The other patch (on minmax.cocci) removes a report about ? being used in return statements that has been generating not very useful suggestions to change idiomatic code" * tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: Coccinelle: pm_runtime: Fix grammar in comment coccinelle: misc: minmax: Suppress reports for err returns

'scratch' is never freed. Fix this by calling kfree() in the success, and in the error case. Cc: [email protected] # +v5.13 Fixes: f221974 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs") Signed-off-by: Jarkko Sakkinen <[email protected]>

When asn1_encode_sequence() fails, WARN is not the correct solution. 1. asn1_encode_sequence() is not an internal function (located in lib/asn1_encode.c). 2. Location is known, which makes the stack trace useless. 3. Results a crash if panic_on_warn is set. It is also noteworthy that the use of WARN is undocumented, and it should be avoided unless there is a carefully considered rationale to use it. Replace WARN with pr_err, and print the return value instead, which is only useful piece of information. Cc: [email protected] # v5.13+ Fixes: f221974 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs") Signed-off-by: Jarkko Sakkinen <[email protected]>

Merge an amd-pstate driver fix for 6.10-rc1: - Fix a memory leak in the exit path of amd-pstate (Peng Ma). * pm-cpufreq: cpufreq: amd-pstate: fix memory leak on CPU EPP exit

…already" This reverts commit 7274c41. Ken reported that RTL8125b can lock up if gro_flush_timeout has the default value of 20000 and napi_defer_hard_irqs is set to 0. In this scenario device interrupts aren't disabled, what seems to trigger some silicon bug under heavy load. I was able to reproduce this behavior on RTL8168h. Fix this by reverting 7274c41. Fixes: 7274c41 ("r8169: don't try to disable interrupts if NAPI is scheduled already") Cc: [email protected] Reported-by: Ken Milmore <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Billy Jheng Bing-Jhong reported a race between __unix_gc() and queue_oob(). __unix_gc() tries to garbage-collect close()d inflight sockets, and then if the socket has MSG_OOB in unix_sk(sk)->oob_skb, GC will drop the reference and set NULL to it locklessly. However, the peer socket still can send MSG_OOB message and queue_oob() can update unix_sk(sk)->oob_skb concurrently, leading NULL pointer dereference. [0] To fix the issue, let's update unix_sk(sk)->oob_skb under the sk_receive_queue's lock and take it everywhere we touch oob_skb. Note that we defer kfree_skb() in manage_oob() to silence lockdep false-positive (See [1]). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 8000000009f5e067 P4D 8000000009f5e067 PUD 9f5d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc5-00191-gd091e579b864 #110 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events delayed_fput RIP: 0010:skb_dequeue (./include/linux/skbuff.h:2386 ./include/linux/skbuff.h:2402 net/core/skbuff.c:3847) Code: 39 e3 74 3e 8b 43 10 48 89 ef 83 e8 01 89 43 10 49 8b 44 24 08 49 c7 44 24 08 00 00 00 00 49 8b 14 24 49 c7 04 24 00 00 00 00 <48> 89 42 08 48 89 10 e8 e7 c5 42 00 4c 89 e0 5b 5d 41 5c c3 cc cc RSP: 0018:ffffc900001bfd48 EFLAGS: 00000002 RAX: 0000000000000000 RBX: ffff8880088f5ae8 RCX: 00000000361289f9 RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff8880088f5b00 RBP: ffff8880088f5b00 R08: 0000000000080000 R09: 0000000000000001 R10: 0000000000000003 R11: 0000000000000001 R12: ffff8880056b6a00 R13: ffff8880088f5280 R14: 0000000000000001 R15: ffff8880088f5a80 FS: 0000000000000000(0000) GS:ffff88807dd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000006314000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> unix_release_sock (net/unix/af_unix.c:654) unix_release (net/unix/af_unix.c:1050) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:423) delayed_fput (fs/file_table.c:444 (discriminator 3)) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Modules linked in: CR2: 0000000000000008 Link: https://lore.kernel.org/netdev/[email protected]/ [1] Fixes: 1279f9d ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Reported-by: Billy Jheng Bing-Jhong <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

seg6_hmac_init_algo returns without cleaning up the previous allocations if one fails, so it's going to leak all that memory and the crypto tfms. Update seg6_hmac_exit to only free the memory when allocated, so we can reuse the code directly. Fixes: bf355b8 ("ipv6: sr: add core files for SR HMAC support") Reported-by: Sabrina Dubroca <[email protected]> Closes: https://lore.kernel.org/netdev/Zj3bh-gE7eT6V6aH@hog/ Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Test arp_ndisc_untracked_subnets use tcpdump to filter the unsolicited and untracked na messages. It set -e before calling tcpdump. But if tcpdump filters 0 packet, it will return none zero, and cause the script to exit. Instead of using slow tcpdump to capture packets, let's using tc rule to filter out the na message. At the same time, fix function setup_v6 which only needs one parameter. Move all the related helpers from forwarding lib.sh to net lib.sh. Fixes: 0ea7b0a ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows: alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g); It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g: memcpy((void*)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul, /*flags=*/2ul, /*mode=*/0ul); memcpy((void*)0x20000000, "100\000", 4); syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul); Let's limit the max value of dctcp_shift_g by param_set_uint_minmax(). With this patch: # echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument [0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Yue Sun <[email protected]> Reported-by: xingwei lee <[email protected]> Closes: https://lore.kernel.org/netdev/CAEkJfYNJM=cw-8x7_Vmj1J6uYVCWMbbvD=EFmDPVBGpTsqOxEA@mail.gmail.com/ Fixes: e3118e8 ("net: tcp: add DCTCP congestion control algorithm") Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

GC attempts to explicitly drop oob_skb's reference before purging the hit list. The problem is with embryos: kfree_skb(u->oob_skb) is never called on an embryo socket. The python script below [0] sends a listener's fd to its embryo as OOB data. While GC does collect the embryo's queue, it fails to drop the OOB skb's refcount. The skb which was in embryo's receive queue stays as unix_sk(sk)->oob_skb and keeps the listener's refcount [1]. Tell GC to dispose embryo's oob_skb. [0]: from array import array from socket import * addr = '\x00unix-oob' lis = socket(AF_UNIX, SOCK_STREAM) lis.bind(addr) lis.listen(1) s = socket(AF_UNIX, SOCK_STREAM) s.connect(addr) scm = (SOL_SOCKET, SCM_RIGHTS, array('i', [lis.fileno()])) s.sendmsg([b'x'], [scm], MSG_OOB) lis.close() [1] $ grep unix-oob /proc/net/unix $ ./unix-oob.py $ grep unix-oob /proc/net/unix 0000000000000000: 00000002 00000000 00000000 0001 02 0 @unix-oob 0000000000000000: 00000002 00000000 00010000 0001 01 6072 @unix-oob Fixes: 4090fa3 ("af_unix: Replace garbage collection algorithm.") Signed-off-by: Michal Luczaj <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>

scm_rights.c covers various test cases for inflight file descriptors and garbage collector for AF_UNIX sockets. Currently, SCM_RIGHTS messages are sent with 3-bytes string, and it's not good for MSG_OOB cases, as SCM_RIGTS cmsg goes with the first 2-bytes, which is non-OOB data. Let's send SCM_RIGHTS messages with 1-byte character to pack SCM_RIGHTS into OOB data. Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Michal Luczaj <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>

Michal Luczaj says: ==================== af_unix: Fix GC and improve selftest Series deals with AF_UNIX garbage collector mishandling some in-flight graph cycles. Embryos carrying OOB packets with SCM_RIGHTS cause issues. Patch 1/2 fixes the memory leak. Patch 2/2 tweaks the selftest for a better OOB coverage. v3: - Patch 1/2: correct the commit message (Kuniyuki) v2: https://lore.kernel.org/netdev/[email protected]/ - Patch 1/2: remove WARN_ON_ONCE() (Kuniyuki) - Combine both patches into a series (Kuniyuki) v1: https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Open vSwitch is originally intended to switch at layer 2, only dealing with Ethernet frames. With the introduction of l3 tunnels support, it crossed into the realm of needing to care a bit about some routing details when making forwarding decisions. If an oversized packet would need to be fragmented during this forwarding decision, there is a chance for pmtu to get involved and generate a routing exception. This is gated by the skbuff->pkt_type field. When a flow is already loaded into the openvswitch module this field is set up and transitioned properly as a packet moves from one port to another. In the case that a packet execute is invoked after a flow is newly installed this field is not properly initialized. This causes the pmtud mechanism to omit sending the required exception messages across the tunnel boundary and a second attempt needs to be made to make sure that the routing exception is properly setup. To fix this, we set the outgoing packet's pkt_type to PACKET_OUTGOING, since it can only get to the openvswitch module via a port device or packet command. Even for bridge ports as users, the pkt_type needs to be reset when doing the transmit as the packet is truly outgoing and routing needs to get involved post packet transformations, in the case of VXLAN/GENEVE/udp-tunnel packets. In general, the pkt_type on output gets ignored, since we go straight to the driver, but in the case of tunnel ports they go through IP routing layer. This issue is periodically encountered in complex setups, such as large openshift deployments, where multiple sets of tunnel traversal occurs. A way to recreate this is with the ovn-heater project that can setup a networking environment which mimics such large deployments. We need larger environments for this because we need to ensure that flow misses occur. In these environment, without this patch, we can see: ./ovn_cluster.sh start podman exec ovn-chassis-1 ip r a 170.168.0.5/32 dev eth1 mtu 1200 podman exec ovn-chassis-1 ip netns exec sw01p1 ip r flush cache podman exec ovn-chassis-1 ip netns exec sw01p1 \ ping 21.0.0.3 -M do -s 1300 -c2 PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data. From 21.0.0.3 icmp_seq=2 Frag needed and DF set (mtu = 1142) --- 21.0.0.3 ping statistics --- ... Using tcpdump, we can also see the expected ICMP FRAG_NEEDED message is not sent into the server. With this patch, setting the pkt_type, we see the following: podman exec ovn-chassis-1 ip netns exec sw01p1 \ ping 21.0.0.3 -M do -s 1300 -c2 PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data. From 21.0.0.3 icmp_seq=1 Frag needed and DF set (mtu = 1222) ping: local error: message too long, mtu=1222 --- 21.0.0.3 ping statistics --- ... In this case, the first ping request receives the FRAG_NEEDED message and a local routing exception is created. Tested-by: Jaime Caamano <[email protected]> Reported-at: https://issues.redhat.com/browse/FDP-164 Fixes: 5826484 ("openvswitch: Add vxlan tunneling support.") Signed-off-by: Aaron Conole <[email protected]> Acked-by: Eelco Chaudron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

pidfs started using much saner inodes in commit b28ddcc ("pidfs: convert to path_from_stashed() helper"), but that exposed the fact that lsof had some knowledge of just how odd our old anon_inode usage was. For example, legacy anon_inodes hadn't even initialized the inode type in the inode mode, so everything had a type of zero. So sane tools like 'stat' would report these files as "weird file", but 'lsof' instead used that (together with the name of the link in proc) to notice that it's an anonymous inode, and used it to detect pidfd files. Let's keep our internal new sane inode model, but mask the file type bits at 'stat()' time in the getattr() function we already have, and by making the dentry name match what lsof expects too. This keeps our internal models sane, but should make user space see the same old odd behavior. Reported-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Link: lsof-org/lsof#317 Cc: Alexander Viro <[email protected]> Cc: Seth Forshee <[email protected]> Cc: Tycho Andersen <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Following the relocation of the function call outside of __acpi_find_gpio(), move the ACPI device NULL check to acpi_can_fallback_to_crs(). Signed-off-by: Laura Nao <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reported-by: kernelci.org bot <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: 49c02f6 ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()") Signed-off-by: Andy Shevchenko <[email protected]>

…kernel/git/viro/vfs Pull vfs blocksize updates from Al Viro: "This gets rid of bogus set_blocksize() uses, switches it over to be based on a 'struct file *' and verifies that the caller has the device opened exclusively" * tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make set_blocksize() fail unless block device is opened exclusive set_blocksize(): switch to passing struct file * btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens swsusp: don't bother with setting block size zram: don't bother with reopening - just use O_EXCL for open swapon(2): open swap with O_EXCL swapon(2)/swapoff(2): don't bother with block size pktcdvd: sort set_blocksize() calls out bcache_register(): don't bother with set_blocksize()

…de match Previous patch modified the standard used by acpi_gpiochip_find() to match device nodes. Using the device node set in gc->gpiodev->d- ev instead of gc->parent. However, there is a situation in gpio-dwapb where the GPIO device driver will set gc->fwnode for each port corresponding to a child node under a GPIO device, so gc->gpiodev->dev will be assigned the value of each child node in gpiochip_add_data(). gpio-dwapb.c: 128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, struct dwapb_port_property *pp, unsigned int offs); port->gc.fwnode = pp->fwnode; 693,39 static int dwapb_gpio_probe; err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i); When other drivers request GPIO pin resources through the GPIO device node provided by ACPI (corresponding to the parent node), the change of the matching object to gc->gpiodev->dev in acpi_gpiochip_find() only allows finding the value of each port (child node), resulting in a failed request. Reapply the condition of using gc->parent for match in acpi_gpio- chip_find() in the code can compatible with the problem of gpio-dwapb, and will not affect the two cases mentioned in the patch: 1. There is no setting for gc->fwnode. 2. The case that depends on using gc->fwnode for match. Fixes: 5062e4c ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()") Fixes: 067dbc1 ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()") Signed-off-by: Devyn Liu <[email protected]> Reviewed-by: Mika Westerberg <[email protected]> Tested-by: Benjamin Tissoires <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>

…nel/git/viro/vfs Pull bdev bd_inode updates from Al Viro: "Replacement of bdev->bd_inode with sane(r) set of primitives by me and Yu Kuai" * tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RIP ->bd_inode dasd_format(): killing the last remaining user of ->bd_inode nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode block/bdev.c: use the knowledge of inode/bdev coallocation gfs2: more obvious initializations of mapping->host fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here... grow_dev_folio(): we only want ->bd_inode->i_mapping there use ->bd_mapping instead of ->bd_inode->i_mapping block_device: add a pointer to struct address_space (page cache of bdev) missing helpers: bdev_unhash(), bdev_drop() block: move two helpers into bdev.c block2mtd: prevent direct access of bd_inode dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode) blkdev_write_iter(): saner way to get inode and bdev bcachefs: remove dead function bdev_sectors() ext4: remove block_device_ejected() erofs_buf: store address_space instead of inode erofs: switch erofs_bread() to passing offset instead of block number

…pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull trusted keys fixes from Jarkko Sakkinen: "These are two bugs I found from trusted keys while working on a new RSA key type for TPM2. Both originate form v5.13. The memory leak is more crucial but I don't think it is either good idea if kernel throws WARN when ASN.1 parser fails, even if it is related to programming error, as it is not that mature code yet. There's at least two WARN's in that code but I picked just the one more likely to trigger. Planning to fix the other one too over time" * tag 'keys-trusted-next-6.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: KEYS: trusted: Do not use WARN when encode fails KEYS: trusted: Fix memory leak in tpm2_key_encode()

…ernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...

…git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: "This makes core rpmsg_class const and ensures that the automatic module loading of the Qualcomm glink_ssr driver happens" * tag 'rpmsg-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: qcom_glink_ssr: fix module autoloading rpmsg: core: Make rpmsg_class constant

…git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "This makes the remoteproc core rproc_class const. DeviceTree bindings for a few different Qualcomm remoteprocs are updated to remove a range of validation warnings/errors. The Qualcomm SMD binding marks qcom,ipc deprecated, in favor or the mailbox interface. The TI K3 R5 remoteproc driver is updated to ensure that cores are powered up in the appropriate order. The driver also see a couple of fixes related to cleanups in error paths during probe. The Mediatek remoteproc driver is extended to support the MT8188 SCP core 1. Support for varying DRAM and IPI shared buffer sizes are introduced. This together with a couple of bug fixes and improvements to the driver. Support for the AMD-Xilinx Versal and Versal-NET platforms are added. Coredump support and support for parsing TCM information from DeviceTree is added to the Xilinx R5F remoteproc driver" * tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits) dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996 dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated remoteproc: k3-r5: Jump to error handling labels in start/stop errors remoteproc: mediatek: Fix error code in scp_rproc_init() remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs remoteproc: k3-r5: Wait for core0 power-up before powering up core1 remoteproc: mediatek: Add IMGSYS IPI command remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes remoteproc: mediatek: Support MT8188 SCP core 1 dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP drivers: remoteproc: xlnx: Fix uninitialized tcm mode drivers: remoteproc: xlnx: Fix uninitialized variable use drivers: remoteproc: xlnx: Add Versal and Versal-NET support remoteproc: zynqmp: parse TCM from device tree dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings remoteproc: zynqmp: fix lockstep mode memory region remoteproc: zynqmp: Add coredump support ...

LLVM 17 started treating const structs as constants: * llvm/llvm-project@0b2d5b967d98 Combined with pointer laundering via ptr_to_u64, which takes a const ptr, but in reality treats the underlying memory as mutable, this makes clang always pass zero to btf__type_by_id, which breaks full name resolution. Disassembly before (LLVM 16) and after (LLVM 17): - 8b 75 cc mov -0x34(%rbp),%esi - e8 47 8d 02 00 call 3f5b0 <btf__type_by_id> + 31 f6 xor %esi,%esi + e8 a9 8c 02 00 call 3f510 <btf__type_by_id> It's a bigger project to fix this properly (and a question whether LLVM itself should detect this), but for right now let's just fix bpftool. For more information, see this thread in bpf mailing list: * https://lore.kernel.org/bpf/CABWYdi0ymezpYsQsPv7qzpx2fWuTkoD1-wG1eT-9x-TSREFrQg@mail.gmail.com/T/ Fixes: b662000 ("bpftool: Adding support for BTF program names") Signed-off-by: Ivan Babrou <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Nick Desaulniers <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

…l/git/jassibrar/mailbox Pull mailbox updates from Jassi Brar: - redo the omap driver from legacy to mailbox api - enable bufferless IPI for zynqmp - add mhu-v3 driver - convert from tasklet to BH workqueue - add qcom MSM8974 APCS compatible IDs * tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits) dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible mailbox: Convert from tasklet to BH workqueue mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown mailbox: mtk-cmdq-mailbox: fix module autoloading mailbox: zynqmp: handle SGI for shared IPI mailbox: arm_mhuv3: Add driver dt-bindings: mailbox: arm,mhuv3: Add bindings mailbox: omap: Remove kernel FIFO message queuing mailbox: omap: Reverse FIFO busy check logic mailbox: omap: Remove mbox_chan_to_omap_mbox() mailbox: omap: Use mbox_controller channel list directly mailbox: omap: Use function local struct mbox_controller mailbox: omap: Merge mailbox child node setup loops mailbox: omap: Use devm_pm_runtime_enable() helper mailbox: omap: Remove device class mailbox: omap: Remove unneeded header omap-mailbox.h mailbox: omap: Move fifo size check to point of use mailbox: omap: Move omap_mbox_irq_t into driver mailbox: omap: Remove unused omap_mbox_request_channel() function ...

The variable "prev_state" is not used for any actual operations v2: Fix commit message and description. Signed-off-by: Ying Zhang <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

bpf_prog5 and bpf_prog7 are removed from progs/test_sockmap_kern.h in commit d79a321 ("bpf: Selftests, remove prints from sockmap tests"), now there are only 9 progs in it, not 11: SEC("sk_skb1") int bpf_prog1(struct __sk_buff *skb) SEC("sk_skb2") int bpf_prog2(struct __sk_buff *skb) SEC("sk_skb3") int bpf_prog3(struct __sk_buff *skb) SEC("sockops") int bpf_sockmap(struct bpf_sock_ops *skops) SEC("sk_msg1") int bpf_prog4(struct sk_msg_md *msg) SEC("sk_msg2") int bpf_prog6(struct sk_msg_md *msg) SEC("sk_msg3") int bpf_prog8(struct sk_msg_md *msg) SEC("sk_msg4") int bpf_prog9(struct sk_msg_md *msg) SEC("sk_msg5") int bpf_prog10(struct sk_msg_md *msg) This patch updates the array sizes of prog_fd[], prog_attach_type[] and prog_type[] from 11 to 9 accordingly. Fixes: d79a321 ("bpf: Selftests, remove prints from sockmap tests") Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/9c10d9f974f07fcb354a43a8eca67acb2fafc587.1715926605.git.tanggeliang@kylinos.cn

When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes to bug_table entries, and as a result the last entry in a bug table will be ignored, potentially leading to an unexpected panic(). All prior entries in the table will be handled correctly. The arm64 ABI requires that struct fields of up to 8 bytes are naturally-aligned, with padding added within a struct such that struct are suitably aligned within arrays. When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes signed int file_disp; // 4 bytes unsigned short line; // 2 bytes unsigned short flags; // 2 bytes } ... with 12 bytes total, requiring 4-byte alignment. When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes unsigned short flags; // 2 bytes < implicit padding > // 2 bytes } ... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing padding, requiring 4-byte alginment. When we create a bug_entry in assembly, we align the start of the entry to 4 bytes, which implicitly handles padding for any prior entries. However, we do not align the end of the entry, and so when CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding bytes. For the main kernel image this is not a problem as find_bug() doesn't depend on the trailing padding bytes when searching for entries: for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) if (bugaddr == bug_addr(bug)) return bug; However for modules, module_bug_finalize() depends on the trailing bytes when calculating the number of entries: mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); ... and as the last bug_entry lacks the necessary padding bytes, this entry will not be counted, e.g. in the case of a single entry: sechdrs[i].sh_size == 6 sizeof(struct bug_entry) == 8; sechdrs[i].sh_size / sizeof(struct bug_entry) == 0; Consequently module_find_bug() will miss the last bug_entry when it does: for (i = 0; i < mod->num_bugs; ++i, ++bug) if (bugaddr == bug_addr(bug)) goto out; ... which can lead to a kenrel panic due to an unhandled bug. This can be demonstrated with the following module: static int __init buginit(void) { WARN(1, "hello\n"); return 0; } static void __exit bugexit(void) { } module_init(buginit); module_exit(bugexit); MODULE_LICENSE("GPL"); ... which will trigger a kernel panic when loaded: ------------[ cut here ]------------ hello Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: hello(O+) CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : buginit+0x18/0x1000 [hello] lr : buginit+0x18/0x1000 [hello] sp : ffff800080533ae0 x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58 x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0 x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006 x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720 x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312 x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8 x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000 x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0 Call trace: buginit+0x18/0x1000 [hello] do_one_initcall+0x80/0x1c8 do_init_module+0x60/0x218 load_module+0x1ba4/0x1d70 __do_sys_init_module+0x198/0x1d0 __arm64_sys_init_module+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: d0ffffe0 910003fd 91000000 9400000b (d4210000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: BRK handler: Fatal exception Fix this by always aligning the end of a bug_entry to 4 bytes, which is correct regardless of CONFIG_DEBUG_BUGVERBOSE. Fixes: 9fb7410 ("arm64/BUG: Use BRK instruction for generic BUG traps") Signed-off-by: Yuanbin Xie <[email protected]> Signed-off-by: Jiangfeng Xiao <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>

…kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New HW support: - Freescale i.MX8ULP edma support in edma driver - StarFive JH8100 DMA support in Synopsis axi-dmac driver Updates: - Tracing support for freescale edma driver, updates to dpaa2 driver - Remove unused QCom hidma DT support - Support for i2c dma in imx-sdma - Maintainers update for idxd and edma drivers" * tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits) MAINTAINERS: Update role for IDXD driver dmaengine: fsl-edma: use _Generic to handle difference type dmaengine: fsl-edma: add trace event support dmaengine: idxd: Avoid unnecessary destruction of file_ida dmaengine: xilinx: xdma: fix module autoloading dt-bindings: dma: fsl-edma: allow 'power-domains' property dt-bindings: dma: fsl-edma: remove 'clocks' from required dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning dmaengine: imx-sdma: Add i2c dma support dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n> dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string dt-bindings: dma: Drop unused QCom hidma binding dmaengine: qcom: Drop hidma DT support dmaengine: pl08x: Use kcalloc() instead of kzalloc() dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3 dmaengine: fsl-edma: fix miss mutex unlock at an error return path dmaengine: pch_dma: remove unused function chan2parent dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open ...

…/git/phy/linux-phy Pull generic phy updates from Vinod Koul: "New HW Support: - Support for Embedded DisplayPort and DisplayPort submodes and driver support on Qualcomm X1E80100 edp driver - Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000 and eusb2-repeater for SMB2360 - Samsung HDMI PHY for i.MX8MP, gs101 UFS phy - Mediatek XFI T-PHY support for mt7988 - Rockchip usbdp combo phy driver Updates: - Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage swing tables - Freescale imx8m-pci pcie link-up updates - Rockchip rx-common-refclk-mode support - More platform remove callback returning void conversions" * tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits) dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000 dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000 phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p phy: samsung-ufs: ufs: exit on first reported error phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header phy: rockchip: fix CONFIG_TYPEC dependency phy: rockchip: usbdp: fix uninitialized variable phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode phy: rockchip: add usbdp combo phy driver dt-bindings: phy: add rockchip usbdp combo phy document phy: add driver for MediaTek XFI T-PHY dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5 MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101. ...

…kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - cleanup and conversion for soundwire sysfs groups - intel support for ace2x bits, auxdevice pm improvements - qcom multi link device support * tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits) soundwire: intel_ace2.x: add support for DOAISE property soundwire: intel_ace2.x: add support for DODSE property soundwire: intel_ace2x: use DOAIS and DODS settings from firmware soundwire: intel_ace2x: cleanup DOAIS/DODS settings soundwire: intel_ace2x: simplify check_wake() soundwire: intel_ace2x: fix wakeup handling soundwire: intel_init: resume all devices on exit. soundwire: intel: export intel_resume_child_device soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume() ASoC: SOF: Intel: hda: disable SoundWire interrupt later soundwire: qcom: allow multi-link on newer devices soundwire: intel_ace2x: use legacy formula for intel_alh_id soundwire: reconcile dp0_prop and dpn_prop soundwire: intel_ace2x: set the clock source soundwire: intel_ace2.x: power-up first before setting SYNCPRD soundwire: intel_ace2x: move and extend clock selection soundwire: intel: add support for MeteorLake additional clocks soundwire: intel: add more values for SYNCPRD soundwire: bus: extend base clock checks to 96 MHz soundwire: cadence: show the bus frequency and frame shape ...

…kernel/git/andy/linux-gpio-intel Pull intel-gpio fixes from Andy Shevchenko: - NULL pointer dereference fix in GPIO APCI library - Restore ACPI handle matching for GPIO devices represented in banks * tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel: gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()

…kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix the MediaTek lvts_thermal driver and the handling of trip points that start as invalid and are adjusted later by user space via sysfs. Specifics: - Fix and clean up the MediaTek lvts_thermal driver (Julien Panis) - Prevent invalid trip point handling from triggering spurious trip point crossing events and allow passive polling to stop when a passive trip point involved in it becomes invalid (Rafael Wysocki)" * tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Fix the handling of invalid trip points thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data

…nel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These make the ACPI EC driver always install the EC address space handler at the root of the ACPI namespace which causes it to take care of all EC operation regions everywhere. This means that the custom EC address space handler in the WMI driver is not needed any more and accordingly it gets removed altogether" * tag 'acpi-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: wmi: Remove custom EC address space handler ACPI: EC: Install address space handler at the namespace root

…l/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix the amd-pstate driver and the operating performance point (OPP) handling related to generic PM domains. Specifics: - Fix a memory leak in the exit path of amd-pstate (Peng Ma) - Fix required_opp_tables handling in the cases when multiple generic PM domains share one OPP table (Viresh Kumar)" * tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: OPP: Fix required_opp_tables for multiple genpds using same table cpufreq: amd-pstate: fix memory leak on CPU EPP exit

…ernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM discard regressions due to DM core switching over to using queue_limits_set() without DM core and targets first being updated to set (and stack) discard limits in terms of max_hw_discard_sectors and not max_discard_sectors - Fix stable@ DM integrity discard support to set device's discard_granularity limit to the device's logical block size * tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: always manage discard support in terms of max_hw_discard_sectors dm-integrity: set discard_granularity to logical block size

…ux/kernel/git/efi/efi Pull EFI fix from Ard Biesheuvel: - Followup fix for the EFI boot sequence refactor, which may result in physical KASLR putting the kernel in a region which is being used for a special purpose via a command line argument. * tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Omit physical KASLR when memory reservations exist

…/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: . remove use of kernel config option from uapi header * tag 'm68knommu-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Avoid CONFIG_COLDFIRE switch in uapi header

…git/s390/linux Pull more s390 updates from Alexander Gordeev: - Switch read and write software bits for PUDs - Add missing hardware bits for PUDs and PMDs - Generate unwind information for C modules to fix GDB unwind error for vDSO functions - Create .build-id links for unstripped vDSO files to enable vDSO debugging with symbols - Use standard stack frame layout for vDSO generated stack frames to manually walk stack frames without DWARF information - Rework perf_callchain_user() and arch_stack_walk_user() functions to reduce code duplication - Skip first stack frame when walking user stack - Add basic checks to identify invalid instruction pointers when walking stack frames - Introduce and use struct stack_frame_vdso_wrapper within vDSO user wrapper code to automatically generate an asm-offset define. Also use STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document that the code works with user space stack - Clear the backchain of the extra stack frame added by the vDSO user wrapper code. This allows the user stack walker to detect and skip the non-standard stack frame. Without this an incorrect instruction pointer would be added to stack traces. - Rewrite psw_idle() function in C to ease maintenance and further enhancements - Remove get_vtimer() function and use get_cpu_timer() instead - Mark psw variable in __load_psw_mask() as __unitialized to avoid superfluous clearing of PSW - Remove obsolete and superfluous comment about removed TIF_FPU flag - Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle - Wipe sensitive data and all copies of protected- or secure-keys from stack when an IOCTL fails - Both do_airq_interrupt() and do_io_interrupt() functions set CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code - Provide iucv_alloc_device() and iucv_release_device() helpers, which can be used to deduplicate more or less identical IUCV device allocation and release code in four different drivers - Make use of iucv_alloc_device() and iucv_release_device() helpers to get rid of quite some code and also remove a cast to an incompatible function (clang W=1) - There is no user of iucv_root outside of the core IUCV code left. Therefore remove the EXPORT_SYMBOL - __apply_alternatives() contains a runtime check which verifies that the size of the to be patched code area is even. Convert this to a compile time check - Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands from 128 to 240 - Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally allowed - Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL block on 'scp_data' sysfs attribute update - Initialize the correct fields of the NVMe dump block, which were confused with FCP fields - Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce code duplication - Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such as dumpconf passing additional kernel command line parameters to a stand-alone dumper - Rework the CPACF query functions to use the correct RRE or RRF instruction formats and set instruction register fields correctly - Instead of calling BUG() at runtime force a link error during compile when a unsupported opcode is used with __cpacf_query() or __cpacf_check_opcode() functions - Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask or /sys/bus/ap/aqmask sysfs file update with a relative mask value - Fix "bindings complete" udev event which should be sent once all AP devices have been bound to device drivers and again when unbind/bind actions take place and all AP devices are bound again - Facility list alt_stfle_fac_list is nowhere used in the decompressor, therefore remove it there - Remove custom kprobes insn slot allocator in favour of the standard module_alloc() one, since kernel image and module areas are located within 4GB - Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid calling memset() with a large byte count and get rid of the sparse warning as result * tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/zcrypt: Use kvcalloc() instead of kvmalloc_array() s390/kprobes: Remove custom insn slot allocator s390/boot: Remove alt_stfle_fac_list from decompressor s390/ap: Fix bind complete udev event sent after each AP bus scan s390/ap: Fix crash in AP internal function modify_bitmap() s390/cpacf: Make use of invalid opcode produce a link error s390/cpacf: Split and rework cpacf query functions s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data' s390/ipl: Fix incorrect initialization of nvme dump block s390/ipl: Fix incorrect initialization of len fields in nvme reipl block s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds s390/alternatives: Convert runtime sanity check into compile time check s390/iucv: Unexport iucv_root tty: hvc-iucv: Make use of iucv_alloc_device() s390/smsgiucv_app: Make use of iucv_alloc_device() s390/netiucv: Make use of iucv_alloc_device() s390/vmlogrdr: Make use of iucv_alloc_device() s390/iucv: Provide iucv_alloc_device() / iucv_release_device() ...

…nel/git/viro/vfs Pull bdev flags update from Al Viro: "Compactifying bdev flags. We can easily have up to 24 flags with sane atomicity, _without_ pushing anything out of the first cacheline of struct block_device" * tag 'pull-bd_flags-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bdev: move ->bd_make_it_fail to ->__bd_flags bdev: move ->bd_ro_warned to ->__bd_flags bdev: move ->bd_has_subit_bio to ->__bd_flags bdev: move ->bd_write_holder into ->__bd_flags bdev: move ->bd_read_only to ->__bd_flags bdev: infrastructure for flags wrapper for access to ->bd_partno Use bdev_is_paritition() instead of open-coding it

…t/viro/vfs Pull misc vfs updates from Al Viro: "Assorted commits that had missed the last merge window..." * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove call_{read,write}_iter() functions do_dentry_open(): kill inode argument kernel_file_open(): get rid of inode argument get_file_rcu(): no need to check for NULL separately fd_is_open(): move to fs/file.c close_on_exec(): pass files_struct instead of fdtable

Pull bitmap updates from Yury Norov: - topology_span_sane() optimization from Kyle Meyer - fns() rework from Kuan-Wei Chiu (used in cpumask_local_spread() and other places) - headers cleanup from Andy - add a MAINTAINERS record for bitops API * tag 'bitmap-for-6.10v2' of https://github.com/norov/linux: usercopy: Don't use "proxy" headers bitops: Move aligned_byte_mask() to wordpart.h MAINTAINERS: add BITOPS API record bitmap: relax find_nth_bit() limitation on return value lib: make test_bitops compilable into the kernel image bitops: Optimize fns() for improved performance lib/test_bitops: Add benchmark test for fns() Compiler Attributes: Add __always_used macro sched/topology: Optimize topology_span_sane() cpumask: Add for_each_cpu_from()

…/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "General: - Integrate the shellcheck utility with the build of perf to allow catching shell problems early in areas such as 'perf test', 'perf trace' scrape scripts, etc - Add 'uretprobe' variant in the 'perf bench uprobe' tool - Add script to run instances of 'perf script' in parallel - Allow parsing tracepoint names that start with digits, such as 9p/9p_client_req, etc. Make sure 'perf test' tests it even on systems where those tracepoints aren't available - Add Kan Liang to MAINTAINERS as a perf tools reviewer - Add support for using the 'capstone' disassembler library in various tools, such as 'perf script' and 'perf annotate'. This is an alternative for the use of the 'xed' and 'objdump' disassemblers Data-type profiling improvements: - Resolve types for a->b->c by backtracking the assignments until it finds DWARF info for one of those members - Support for global variables, keeping a cache to speed up lookups - Handle the 'call' instruction, dealing with effects on registers and handling its return when tracking register data types - Handle x86's segment based addressing like %gs:0x28, to support things like per CPU variables, the stack canary, etc - Data-type profiling got big speedups when using capstone for disassembling. The objdump outoput parsing method is left as a fallback when capstone fails or isn't available. There are patches posted for 6.11 that to use a LLVM disassembler - Support event group display in the TUI when annotating types with --data-type, for instance to show memory load and store events for the data type fields - Optimize the 'perf annotate' data structures, reducing memory usage - Add a initial 'perf test' for 'perf annotate', checking that a target symbol appears on the output, specifying objdump via the command line, etc Vendor Events: - Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics erroneously in TopdownL1 - Add AMD's Zen 5 core and uncore events and metrics. Those come from the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh Processors" document, with events that capture information on op dispatch, execution and retirement, branch prediction, L1 and L2 cache activity, TLB activity, etc - Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/ AmpereOneX Miscellaneous: - Sync header copies with the kernel sources - Move some header copies used only for generating translation string tables for ioctl cmds and other syscall integer arguments to a new directory under tools/perf/beauty/, to separate from copies in tools/include/ that are used to build the tools - Introduce scrape script for several syscall 'flags'/'mask' arguments - Improve cpumap utilization, fixing up pairing of refcounts, using the right iterators (perf_cpu_map__for_each_cpu), etc - Give more details about raw event encodings in 'perf list', show tracepoint encoding in the detailed output - Refactor the DSOs handling code, reducing memory usage - Document the BPF event modifier and add a 'perf test' for it - Improve the event parser, better error messages and add further 'perf test's for it - Add reference count checking to 'struct comm_str' and 'struct mem_info' - Make ARM64's 'perf test' entries for the Neoverse N1 more robust - Tweak the ARM64's Coresight 'perf test's - Improve ARM64's CoreSight ETM version detection and error reporting - Fix handling of symbols when using kcore - Fix PAI (Processor Activity Instrumentation) counter names for s390 virtual machines in 'perf report' - Fix -g/--call-graph option failure in 'perf sched timehist' - Add LIBTRACEEVENT_DIR build option to allow building with libtraceevent installed in non-standard directories, such as when doing cross builds - Various 'perf test' and 'perf bench' fixes - Improve 'perf probe' error message for long C++ probe names" * tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits) tools lib subcmd: Show parent options in help perf pmu: Count sys and cpuid JSON events separately perf stat: Don't display metric header for non-leader uncore events perf annotate-data: Ensure the number of type histograms perf annotate: Fix segfault on sample histogram perf daemon: Fix file leak in daemon_session__control libsubcmd: Fix parse-options memory leak perf lock: Avoid memory leaks from strdup() perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency perf tools: Ignore deleted cgroups perf parse: Allow tracepoint names to start with digits perf parse-events: Add new 'fake_tp' parameter for tests perf parse-events: pass parse_state to add_tracepoint perf symbols: Fix ownership of string in dso__load_vmlinux() perf symbols: Update kcore map before merging in remaining symbols perf maps: Re-use __maps__free_maps_by_name() perf symbols: Remove map from list before updating addresses perf tracepoint: Don't scan all tracepoints to test if one exists perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT perf thread: Fixes to thread__new() related to initializing comm ...

Adjust the following code documentation: * Kernel-doc comments for ring_buffer_read_prepare() and ring_buffer_read_finish() mention that recording to the ring buffer is disabled when the read is active. Remove mention of this restriction because it was already lifted in commit 1039221 ("ring-buffer: Do not disable recording when there is an iterator"). * Function ring_buffer_read_finish() performs a self-check of the ring-buffer by locking cpu_buffer->reader_lock and then calling rb_check_pages(). The preceding comment explains that the lock is needed because rb_check_pages() clears the HEAD flag required by readers which might be running in parallel. Remove this explanation because commit 8843e06 ("ring-buffer: Handle race between rb_move_tail and rb_check_pages") simplified the function so it no longer resets the mentioned flag. Nonetheless, the lock is still needed because a reader swapping a page into the ring buffer can make the underlying doubly-linked list temporarily inconsistent. This is a non-functional change. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Signed-off-by: Petr Pavlu <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>

The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab79 ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. and then run the following commands on the target system: echo 1 > /sys/kernel/tracing/events/sched/sched_switch/enable while true; do echo 16 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 echo 8 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1 done & while true; do for i in /sys/kernel/tracing/per_cpu/*; do timeout 0.1 cat $i/trace_pipe; sleep 0.2 done done To fix the problem, make sure ring_buffer_resize() doesn't invoke rb_check_pages() concurrently with a reader operating on the same ring_buffer_per_cpu by taking its cpu_buffer->reader_lock. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Fixes: 659f451 ("ring-buffer: Add integrity check at end of iter read") Signed-off-by: Petr Pavlu <[email protected]> [ Fixed whitespace ] Signed-off-by: Steven Rostedt (Google) <[email protected]>

Fix the 'make W=1' warning: WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/trace/preemptirq_delay_test.o Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: [email protected] Cc: Mathieu Desnoyers <[email protected]> Fixes: f96e857 ("lib: Add module for testing preemptoff/irqsoff latency tracers") Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>

The patch updates the function documentation comment for rv_en(dis)able_monitor to adhere to the kernel-doc specification. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Fixes: 102227b ("rv: Add Runtime Verification (RV) interface") Signed-off-by: Yang Li <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>

Lan966x is adding ptp traps to redirect the ptp frames to the CPU such that the HW will not forward these frames anywhere. The issue is that in case ptp is not enabled and the timestamping source is et to HWTSTAMP_SOURCE_NETDEV then these traps would not be removed on the error path. Fix this by removing the traps in this case as they are not needed. Fixes: 54e1ed6 ("net: lan966x: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()") Suggested-by: Vladimir Oltean <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Horatiu Vultur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Commit 62c1bff added an extra HZ along with msecs_to_jiffies. This patch fixes that. Cc: [email protected] Fixes: 62c1bff ("net: mana: Configure hwc timeout from hardware") Signed-off-by: Souradeep Chakrabarti <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Reviewed-by: Dexuan Cui <[email protected]> Link: https://lore.kernel.org/r/1716185104-31658-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Paolo Abeni <[email protected]>

This reverts commit b8995a1. Ard managed to reproduce the dm-crypt corruption problem and got to the bottom of it, so re-apply the problematic patch in preparation for fixing things properly. Cc: [email protected] Signed-off-by: Will Deacon <[email protected]>

TIF_FOREIGN_FPSTATE is a 'convenience' flag that should reflect whether the current CPU holds the most recent user mode FP/SIMD state of the current task. It combines two conditions: - whether the current CPU's FP/SIMD state belongs to the task; - whether that state is the most recent associated with the task (as a task may have executed on other CPUs as well). When a task is scheduled in and TIF_KERNEL_FPSTATE is set, it means the task was in a kernel mode NEON section when it was scheduled out, and so the kernel mode FP/SIMD state is restored. Since this implies that the current CPU is *not* holding the most recent user mode FP/SIMD state of the current task, the TIF_FOREIGN_FPSTATE flag is set too, so that the user mode FP/SIMD state is reloaded from memory when returning to userland. However, the task may be scheduled out after completing the kernel mode NEON section, but before returning to userland. When this happens, the TIF_FOREIGN_FPSTATE flag will not be preserved, but will be set as usual the next time the task is scheduled in, and will be based on the above conditions. This means that, rather than setting TIF_FOREIGN_FPSTATE when scheduling in a task with TIF_KERNEL_FPSTATE set, the underlying state should be updated so that TIF_FOREIGN_FPSTATE will assume the expected value as a result. So instead, call fpsimd_flush_cpu_state(), which takes care of this. Closes: https://lore.kernel.org/all/[email protected] Reported-by: Johannes Nixdorf <[email protected]> Fixes: aefbab8 ("arm64: fpsimd: Preserve/restore kernel mode NEON at context switch") Cc: Mark Brown <[email protected]> Cc: Dave Martin <[email protected]> Cc: Janne Grunau <[email protected]> Cc: [email protected] Signed-off-by: Ard Biesheuvel <[email protected]> Tested-by: Janne Grunau <[email protected]> Tested-by: Johannes Nixdorf <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>

In the vp_vdpa_set_status function, when setting the device status to VIRTIO_CONFIG_S_DRIVER_OK, the vp_vdpa_request_irq function may fail. In such cases, the device status should not be set to DRIVER_OK. Add exception printing to remind the user. Signed-off-by: Yuxue Liu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: "Michael S. Tsirkin" <[email protected]> CC: Jason Wang <[email protected]> CC: Xuan Zhuo <[email protected]> CC: [email protected] Signed-off-by: Li Zhijian <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

Currently, we can try to queue an event's work before the vhost_task is created. When this happens we just drop it in vhost_scsi_do_plug before even calling vhost_vq_work_queue. During a device shutdown we do the same thing after vhost_scsi_clear_endpoint has cleared the backends. In the next patches we will be able to kill the vhost_task before we have cleared the endpoint. In that case, vhost_vq_work_queue can fail and we will leak the event's memory. This has handle the failure by just freeing the event. This is safe to do, because vhost_vq_work_queue will only return failure for us when the vhost_task is killed and so userspace will not be able to handle events if we sent them. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

In the next patches we will support the vhost_task being killed while in use. The problem for vhost-scsi is that we can't free some structs until we get responses for commands we have submitted to the target layer and we currently process the responses from the vhost_task. This has just drop the responses and free the command's resources. When all commands have completed then operations like flush will be woken up and we can complete device release and endpoint cleanup. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

We flush all the workers that are not also used by the ctl vq to make sure that responses queued by LIO before the TMF response are sent before the TMF response. This requires a special vhost_vq_flush function which, in the next patches where we handle SIGKILL killing workers while in use, will require extra locking/complexity. To avoid that, this patch has us flush the entire device from the system work queue, then queue up sending the response from there. This is a little less optimal since we now flush all workers but this will be ok since commands have already timed out and perf is not a concern. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost_vq_flush is no longer used so remove it. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

vhost_vq_work_queue will never fail when queueing the TMF's response handling because a guest can only send us TMFs when the device is fully setup so there is always a worker at that time. In the next patches we will modify the worker code so it handles SIGKILL by exiting before outstanding commands/TMFs have sent their responses. In that case vhost_vq_work_queue can fail when we try to send a response. This has us just free the TMF's resources since at this time the guest won't be able to get a response even if we could send it. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

__vhost_vq_attach_worker uses the vhost_dev mutex to serialize the swapping of a virtqueue's worker. This was done for simplicity because we are already holding that mutex. In the next patches where the worker can be killed while in use, we need finer grained locking because some drivers will hold the vhost_dev mutex while flushing. However in the SIGKILL handler in the next patches, we will need to be able to swap workers (set current one to NULL), kill queued works and stop new flushes while flushes are in progress. To prepare us, this has us use the virtqueue mutex for swapping workers instead of the vhost_dev one. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

In the next patches where the worker can be killed while in use, we need to be able to take the worker mutex and kill queued works for new IO and flushes, and set some new flags to prevent new __vhost_vq_attach_worker calls from swapping in/out killed workers. If we are holding the worker mutex during a flush and the flush's work is still in the queue, the worker code that will handle the SIGKILL cleanup won't be able to take the mutex and perform it's cleanup. So this patch has us drop the worker mutex while waiting for the flush to complete. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

Instead of lingering until the device is closed, this has us handle SIGKILL by: 1. marking the worker as killed so we no longer try to use it with new virtqueues and new flush operations. 2. setting the virtqueue to worker mapping so no new works are queued. 3. running all the exiting works. Suggested-by: Edward Adam Davis <[email protected]> Reported-and-tested-by: [email protected] Message-Id: <[email protected]> Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

This removes the signal/coredump hacks added for vhost_tasks in: Commit f9010db ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression") When that patch was added vhost_tasks did not handle SIGKILL and would try to ignore/clear the signal and continue on until the device's close function was called. In the previous patches vhost_tasks and the vhost drivers were converted to support SIGKILL by cleaning themselves up and exiting. The hacks are no longer needed so this removes them. Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

With virtio-mem, primarily hibernation is problematic: as the machine shuts down, the virtio-mem device loses its state. Powering the machine back up is like losing a bunch of DIMMs. While there would be ways to add limited support, suspend+resume is more commonly used for VMs and "easier" to support cleanly. s2idle can be supported without any device dependencies. Similarly, one would expect suspend-to-ram (i.e., S3) to work out of the box. However, QEMU currently unplugs all device memory when resuming the VM, using a cold reset on the "wakeup" path. In order to support S3, we need a feature flag for the device to tell us if memory remains plugged when waking up. In the future, QEMU will implement this feature. So let's always support s2idle and support S3 with plugged memory only if the device indicates support. Block hibernation early using the PM notifier. Trying to hibernate now fails early: # echo disk > /sys/power/state [ 26.455369] PM: hibernation: hibernation entry [ 26.458271] virtio_mem virtio0: hibernation is not supported. [ 26.462498] PM: hibernation: hibernation exit -bash: echo: write error: Operation not permitted s2idle works even without the new feature bit: # echo s2idle > /sys/power/mem_sleep # echo mem > /sys/power/state [ 52.083725] PM: suspend entry (s2idle) [ 52.095950] Filesystems sync: 0.010 seconds [ 52.101493] Freezing user space processes [ 52.104213] Freezing user space processes completed (elapsed 0.001 seconds) [ 52.106520] OOM killer disabled. [ 52.107655] Freezing remaining freezable tasks [ 52.110880] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 52.113296] printk: Suspending console(s) (use no_console_suspend to debug) S3 does not work without the feature bit when memory is plugged: # echo deep > /sys/power/mem_sleep # echo mem > /sys/power/state [ 32.788281] PM: suspend entry (deep) [ 32.816630] Filesystems sync: 0.027 seconds [ 32.820029] Freezing user space processes [ 32.823870] Freezing user space processes completed (elapsed 0.001 seconds) [ 32.827756] OOM killer disabled. [ 32.829608] Freezing remaining freezable tasks [ 32.833842] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 32.837953] printk: Suspending console(s) (use no_console_suspend to debug) [ 32.916172] virtio_mem virtio0: suspend+resume with plugged memory is not supported [ 32.916181] virtio-pci 0000:00:02.0: PM: pci_pm_suspend(): virtio_pci_freeze+0x0/0x50 returns -1 [ 32.916197] virtio-pci 0000:00:02.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -1 [ 32.916210] virtio-pci 0000:00:02.0: PM: failed to suspend async: error -1 But S3 works with the new feature bit when memory is plugged (patched QEMU): # echo deep > /sys/power/mem_sleep # echo mem > /sys/power/state [ 33.983694] PM: suspend entry (deep) [ 34.009828] Filesystems sync: 0.024 seconds [ 34.013589] Freezing user space processes [ 34.016722] Freezing user space processes completed (elapsed 0.001 seconds) [ 34.019092] OOM killer disabled. [ 34.020291] Freezing remaining freezable tasks [ 34.023549] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 34.026090] printk: Suspending console(s) (use no_console_suspend to debug) Cc: "Michael S. Tsirkin" <[email protected]> Cc: Jason Wang <[email protected]> Cc: Xuan Zhuo <[email protected]> Signed-off-by: David Hildenbrand <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

Wakeup sources don't support nesting multiple events, so sharing a single object between multiple drivers can result in one driver overriding the wakeup event processing period specified by another driver. Have the virtio balloon driver use the wakeup source of the device it is bound to rather than the wakeup source of the parent device, to avoid conflicts with the transport layer. Note that although the virtio balloon's virtio_device itself isn't what actually wakes up the device, it is responsible for processing wakeup events. In the same way that EPOLLWAKEUP uses a dedicated wakeup_source to prevent suspend when userspace is processing wakeup events, a dedicated wakeup_source is necessary when processing wakeup events in a higher layer in the kernel. Fixes: b12fbc3 ("virtio_balloon: stay awake while adjusting balloon") Signed-off-by: David Stevens <[email protected]> Acked-by: David Hildenbrand <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>

Treat stats requests as wakeup events to ensure that the driver responds to device requests in a timely manner. Signed-off-by: David Stevens <[email protected]> Acked-by: David Hildenbrand <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>