Bond rhel 38451

bindtomac-bond-vlan-httpks.ks.in

@@ -28,6 +28,8 @@ check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ bond
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_config_value bond0.222 ONBOOT no connection autoconnect false
 check_device_config_value bond0 ONBOOT no connection autoconnect false
@@ -44,6 +46,18 @@ check_device_has_ipv4_address bond0 no
 check_device_config_bound_to_mac bond0_slave_1
 check_device_config_bound_to_mac bond0_slave_2
 
+# Configuration from boot options
+check_config_exists @KSTEST_NETDEV1@ yes
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+    check_config_exists @KSTEST_NETDEV3@ yes
+else
+    # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
+    check_config_exists @KSTEST_NETDEV2@ no
+    check_config_exists @KSTEST_NETDEV3@ no
+fi
+
 # No error was written to /root/RESULT file, everything is OK
 if [[ ! -e /root/RESULT ]]; then
    echo SUCCESS > /root/RESULT

bindtomac-bond2-httpks.ks.in

@@ -31,6 +31,8 @@ check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ @KST
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_config_value bond0 ONBOOT no connection autoconnect false
 check_device_config_value bond0_slave_1 ONBOOT no connection autoconnect false
@@ -47,6 +49,22 @@ check_device_config_value bond1_slave_1 ONBOOT yes connection autoconnect __NONE
 check_device_config_value bond1_slave_2 ONBOOT yes connection autoconnect __NONE
 check_device_connected bond1 no
 
+# Configuration from boot options
+check_config_exists @KSTEST_NETDEV1@ yes
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+    check_config_exists @KSTEST_NETDEV3@ yes
+    check_config_exists @KSTEST_NETDEV4@ yes
+    check_config_exists @KSTEST_NETDEV5@ yes
+else
+    # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
+    check_config_exists @KSTEST_NETDEV2@ no
+    check_config_exists @KSTEST_NETDEV3@ no
+    check_config_exists @KSTEST_NETDEV4@ no
+    check_config_exists @KSTEST_NETDEV5@ no
+fi
+
 check_device_config_bound_to_mac bond0_slave_1
 check_device_config_bound_to_mac bond0_slave_2
 check_device_config_bound_to_mac bond1_slave_1

bindtomac-bond2-pre.ks.in

@@ -33,6 +33,8 @@ check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ @KST
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_config_value bond0 ONBOOT no connection autoconnect false
 
@@ -63,6 +65,22 @@ check_device_config_bound_to_mac bond1_slave_2
 # FIXME this doesn't seem to hold for RHEL
 check_device_connected bond1 no
 
+# Configuration from boot options
+check_config_exists @KSTEST_NETDEV1@ yes
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+    check_config_exists @KSTEST_NETDEV3@ yes
+    check_config_exists @KSTEST_NETDEV4@ yes
+    check_config_exists @KSTEST_NETDEV5@ yes
+else
+    # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
+    check_config_exists @KSTEST_NETDEV2@ no
+    check_config_exists @KSTEST_NETDEV3@ no
+    check_config_exists @KSTEST_NETDEV4@ no
+    check_config_exists @KSTEST_NETDEV5@ no
+fi
+
 # No error was written to /root/RESULT file, everything is OK
 if [[ ! -e /root/RESULT ]]; then
    echo SUCCESS > /root/RESULT

bindtomac-bridge-2devs-httpks.ks.in

@@ -70,19 +70,25 @@ else
     check_device_has_ipv4_address @KSTEST_NETDEV2@ yes
 fi
 
+
 check_device_config_value bridge1_slave_1 BRIDGE bridge1 connection master bridge1
 check_device_config_value bridge1_slave_1 BRIDGE bridge1 connection slave-type bridge
 
 check_device_config_value bridge1 ONBOOT yes connection autoconnect __NONE
 
 check_device_config_value bridge1_slave_1 ONBOOT yes connection autoconnect __NONE
 
-if [ "${platform}" == "rhel8" ]; then
+# Configuration from boot options
+if [ "${platform}" != "rhel8" ]; then
+    check_config_exists @KSTEST_NETDEV1@ yes
+fi
+
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+else
     # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
     check_config_exists @KSTEST_NETDEV2@ no
-else
-    # anaconda does create default config file for enslaved device
-    check_config_exists @KSTEST_NETDEV2@ yes
 fi
 
 check_device_config_bound_to_mac bridge0_slave_1

bindtomac-bridge-2devs-pre.ks.in

@@ -77,12 +77,17 @@ check_device_config_value bridge1 ONBOOT yes connection autoconnect __NONE
 
 check_device_config_value bridge1_slave_1 ONBOOT yes connection autoconnect __NONE
 
-if [ "${platform}" == "rhel8" ]; then
+# Configuration from boot options
+if [ "${platform}" != "rhel8" ]; then
+    check_config_exists @KSTEST_NETDEV1@ yes
+fi
+
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+else
     # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
     check_config_exists @KSTEST_NETDEV2@ no
-else
-    # anaconda does create default config file for enslaved device
-    check_config_exists @KSTEST_NETDEV2@ yes
 fi
 
 check_device_config_bound_to_mac bridge0_slave_1

bindtomac-bridge-httpks.ks.in

@@ -33,16 +33,18 @@ else
     check_gui_configurations @KSTEST_NETDEV1@ bridge0
 fi
 
-
 %end
 
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_connected bridge0 yes
 check_device_connected @KSTEST_NETDEV1@ yes
 check_device_config_value bridge0_slave_1 BRIDGE bridge0 connection master bridge0
+check_device_config_value bridge0_slave_1 BRIDGE bridge0 connection slave-type bridge
 check_device_has_ipv4_address bridge0 yes
 check_device_has_ipv4_address @KSTEST_NETDEV1@ no
 
@@ -51,8 +53,11 @@ check_device_has_ipv4_address @KSTEST_NETDEV1@ no
 # check_device_config_value @KSTEST_NETDEV1@ ONBOOT yes connection autoconnect __NONE
 
 check_device_config_value bridge0 ONBOOT no connection autoconnect false
-# TODO: failing, file a bug
-#check_device_config_value bridge0_slave_1 ONBOOT no connection autoconnect false
+check_device_config_value bridge0_slave_1 ONBOOT no connection autoconnect false
+# Configuration from boot options
+if [ "${platform}" != "rhel8" ]; then
+    check_config_exists @KSTEST_NETDEV1@ yes
+fi
 
 check_device_config_bound_to_mac bridge0_slave_1
 

bond-vlan-httpks.ks.in

@@ -28,6 +28,8 @@ check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ bond
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_config_value bond0.222 ONBOOT no connection autoconnect false
 check_device_config_value bond0 ONBOOT no connection autoconnect false
@@ -41,6 +43,18 @@ check_bond_has_slave bond0 @KSTEST_NETDEV1@ no
 check_device_ipv4_address bond0.222 @KSTEST_STATIC_IP@
 check_device_has_ipv4_address bond0 no
 
+# Configuration from boot options
+check_config_exists @KSTEST_NETDEV1@ yes
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+    check_config_exists @KSTEST_NETDEV3@ yes
+else
+    # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
+    check_config_exists @KSTEST_NETDEV2@ no
+    check_config_exists @KSTEST_NETDEV3@ no
+fi
+
 # No error was written to /root/RESULT file, everything is OK
 if [[ ! -e /root/RESULT ]]; then
    echo SUCCESS > /root/RESULT

bond-vlan-pre.ks.in

@@ -32,6 +32,8 @@ check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ bond
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_config_value bond0.222 ONBOOT no connection autoconnect false
 check_device_config_value bond0 ONBOOT no connection autoconnect false
@@ -45,6 +47,18 @@ check_bond_has_slave bond0 @KSTEST_NETDEV1@ no
 check_device_ipv4_address bond0.222 @KSTEST_STATIC_IP@
 check_device_has_ipv4_address bond0 no
 
+# Configuration from boot options
+check_config_exists @KSTEST_NETDEV1@ yes
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+    check_config_exists @KSTEST_NETDEV3@ yes
+else
+    # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
+    check_config_exists @KSTEST_NETDEV2@ no
+    check_config_exists @KSTEST_NETDEV3@ no
+fi
+
 # No error was written to /root/RESULT file, everything is OK
 if [[ ! -e /root/RESULT ]]; then
    echo SUCCESS > /root/RESULT

bond2-httpks.ks.in

@@ -31,6 +31,8 @@ check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ @KST
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_config_value bond0 ONBOOT no connection autoconnect false
 check_device_config_value bond0_slave_1 ONBOOT no connection autoconnect false
@@ -47,6 +49,22 @@ check_device_config_value bond1_slave_1 ONBOOT yes connection autoconnect __NONE
 check_device_config_value bond1_slave_2 ONBOOT yes connection autoconnect __NONE
 check_device_connected bond1 no
 
+# Configuration from boot options
+check_config_exists @KSTEST_NETDEV1@ yes
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+    check_config_exists @KSTEST_NETDEV3@ yes
+    check_config_exists @KSTEST_NETDEV4@ yes
+    check_config_exists @KSTEST_NETDEV5@ yes
+else
+    # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
+    check_config_exists @KSTEST_NETDEV2@ no
+    check_config_exists @KSTEST_NETDEV3@ no
+    check_config_exists @KSTEST_NETDEV4@ no
+    check_config_exists @KSTEST_NETDEV5@ no
+fi
+
 # No error was written to /root/RESULT file, everything is OK
 if [[ ! -e /root/RESULT ]]; then
    echo SUCCESS > /root/RESULT

bond2-pre.ks.in

@@ -33,6 +33,8 @@ check_gui_configurations @KSTEST_NETDEV1@ @KSTEST_NETDEV2@ @KSTEST_NETDEV3@ @KST
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_config_value bond0 ONBOOT no connection autoconnect false
 
@@ -58,6 +60,22 @@ check_device_config_value bond1_slave_2 MASTER bond1 connection master bond1
 # FIXME this doesn't seem to hold for RHEL
 check_device_connected bond1 no
 
+# Configuration from boot options
+check_config_exists @KSTEST_NETDEV1@ yes
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+    check_config_exists @KSTEST_NETDEV3@ yes
+    check_config_exists @KSTEST_NETDEV4@ yes
+    check_config_exists @KSTEST_NETDEV5@ yes
+else
+    # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
+    check_config_exists @KSTEST_NETDEV2@ no
+    check_config_exists @KSTEST_NETDEV3@ no
+    check_config_exists @KSTEST_NETDEV4@ no
+    check_config_exists @KSTEST_NETDEV5@ no
+fi
+
 # No error was written to /root/RESULT file, everything is OK
 if [[ ! -e /root/RESULT ]]; then
    echo SUCCESS > /root/RESULT

bridge-2devs-httpks.ks.in

@@ -78,12 +78,17 @@ check_device_config_value bridge1 ONBOOT yes connection autoconnect __NONE
 
 check_device_config_value bridge1_slave_1 ONBOOT yes connection autoconnect __NONE
 
-if [ "${platform}" == "rhel8" ]; then
+# Configuration from boot options
+if [ "${platform}" != "rhel8" ]; then
+    check_config_exists @KSTEST_NETDEV1@ yes
+fi
+
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+else
     # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
     check_config_exists @KSTEST_NETDEV2@ no
-else
-    # anaconda does create default config file for enslaved device
-    check_config_exists @KSTEST_NETDEV2@ yes
 fi
 
 # WARNING: this depends on assumption of running %post scripts in order they

bridge-2devs-pre.ks.in

@@ -77,12 +77,12 @@ check_device_config_value bridge1 ONBOOT yes connection autoconnect __NONE
 
 check_device_config_value bridge1_slave_1 ONBOOT yes connection autoconnect __NONE
 
-if [ "${platform}" == "rhel8" ]; then
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+else
     # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
     check_config_exists @KSTEST_NETDEV2@ no
-else
-    # anaconda does create default config file for enslaved device
-    check_config_exists @KSTEST_NETDEV2@ yes
 fi
 
 # WARNING: this depends on assumption of running %post scripts in order they

bridge-2devs.ks.in

@@ -76,12 +76,12 @@ check_device_config_value bridge1 ONBOOT yes connection autoconnect __NONE
 
 check_device_config_value bridge1_slave_1 ONBOOT yes connection autoconnect __NONE
 
-if [ "${platform}" == "rhel8" ]; then
+if [ "${platform}" == "rhel9" ] || [ "${platform}" == "rhel10" ]; then
+    check_config_exists @KSTEST_NETDEV2@ yes
+else
     # RHEL-8-FAILURE: anaconda does not create default config file for enslaved device in RHEL8
+    # Since RHEL-38451 don't create default persistent connection for ports/slaves
     check_config_exists @KSTEST_NETDEV2@ no
-else
-    # anaconda does create default config file for enslaved device
-    check_config_exists @KSTEST_NETDEV2@ yes
 fi
 
 # WARNING: this depends on assumption of running %post scripts in order they

bridge-httpks.ks.in

@@ -1,4 +1,5 @@
 #test name bridge
+# This test differs from bridge-2devs in using ip=dhcp (no dev specification)
 %ksappend repos/default.ks
 
 # --onboot=no doesn't make much sense as a use case but we want to test that it works in this test
@@ -38,6 +39,8 @@ fi
 %post
 
 @KSINCLUDE@ post-lib-network.sh
+@KSINCLUDE@ scripts-lib.sh
+platform="$(get_platform @KSTEST_OS_NAME@ @KSTEST_OS_VERSION@)"
 
 check_device_connected bridge0 yes
 check_device_connected @KSTEST_NETDEV1@ yes
@@ -51,8 +54,12 @@ check_device_has_ipv4_address @KSTEST_NETDEV1@ no
 # check_device_config_value @KSTEST_NETDEV1@ ONBOOT yes connection autoconnect __NONE
 
 check_device_config_value bridge0 ONBOOT no connection autoconnect false
-# TODO: failing, file a bug
-#check_device_config_value bridge0_slave_1 ONBOOT no connection autoconnect false
+check_device_config_value bridge0_slave_1 ONBOOT no connection autoconnect false
+
+# Configuration from boot options
+if [ "${platform}" != "rhel8" ]; then
+    check_config_exists @KSTEST_NETDEV1@ yes
+fi
 
 # WARNING: this depends on assumption of running %post scripts in order they
 # are defined here