Merge tag 'v4.19.262' of https://git.kernel.org/pub/scm/linux/kernel/…

…git/stable/linux into 13.0-alioth

This is the 4.19.262 stable release

Documentation/ABI/testing/sysfs-bus-iio

@@ -135,7 +135,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	[email protected]
 Description:

Documentation/process/code-of-conduct-interpretation.rst

@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 261
+SUBLEVEL = 262
 EXTRAVERSION =
 NAME = "People's Front"
 

arch/arm/Kconfig

@@ -69,8 +69,8 @@ config ARM
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_EXIT_THREAD
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
-	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) && (CC_IS_GCC || CLANG_VERSION >= 100000)
+	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL && !CC_IS_CLANG)
+	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_DMA_COHERENT
@@ -2017,7 +2017,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"

arch/arm/Kconfig.debug

@@ -47,8 +47,8 @@ config DEBUG_WX
 
 choice
 	prompt "Choose kernel unwinder"
-	default UNWINDER_ARM if AEABI && !FUNCTION_GRAPH_TRACER
-	default UNWINDER_FRAME_POINTER if !AEABI || FUNCTION_GRAPH_TRACER
+	default UNWINDER_ARM if AEABI
+	default UNWINDER_FRAME_POINTER if !AEABI
 	help
 	  This determines which method will be used for unwinding kernel stack
 	  traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
@@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER
 
 config UNWINDER_ARM
 	bool "ARM EABI stack unwinder"
-	depends on AEABI
+	depends on AEABI && !FUNCTION_GRAPH_TRACER
 	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel

arch/arm/boot/dts/armada-385-turris-omnia.dts

@@ -307,7 +307,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -342,7 +342,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {

arch/arm/boot/dts/exynos4412-midas.dtsi

@@ -525,7 +525,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {

arch/arm/boot/dts/exynos4412-origen.dts

@@ -87,7 +87,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	port@1 {

arch/arm/boot/dts/imx6dl.dtsi

@@ -81,6 +81,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6q.dtsi

@@ -158,6 +158,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6qp.dtsi

@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6sl.dtsi

@@ -118,6 +118,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx6sll.dtsi

@@ -131,6 +131,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		L2: l2-cache@a02000 {

arch/arm/boot/dts/imx6sx.dtsi

@@ -167,12 +167,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 

arch/arm/boot/dts/imx7d-sdb.dts

@@ -163,12 +163,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {

arch/arm/boot/dts/moxart-uc7112lx.dts

@@ -80,7 +80,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 

arch/arm/boot/dts/moxart.dtsi

@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;

arch/arm64/boot/dts/vendor/bindings/dma/moxa,moxart-dma.txt

@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;

arch/mips/bcm47xx/prom.c

@@ -85,7 +85,7 @@ static __init void prom_init_mem(void)
 			pr_debug("Assume 128MB RAM\n");
 			break;
 		}
-		if (!memcmp(prom_init, prom_init + mem, 32))
+		if (!memcmp((void *)prom_init, (void *)prom_init + mem, 32))
 			break;
 	}
 	lowmem = mem;
@@ -162,7 +162,7 @@ void __init bcm47xx_prom_highmem_init(void)
 
 	off = EXTVBASE + __pa(off);
 	for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
-		if (!memcmp(prom_init, (void *)(off + extmem), 16))
+		if (!memcmp((void *)prom_init, (void *)(off + extmem), 16))
 			break;
 	}
 	extmem -= lowmem;

arch/powerpc/Makefile

@@ -165,7 +165,7 @@ CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power8
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power9,-mtune=power8)
 else
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
-CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
+CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=power4
 endif
 else ifdef CONFIG_PPC_BOOK3E_64
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64

arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi

@@ -0,0 +1,51 @@
+/*
+ * e500v1 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};

arch/powerpc/boot/dts/fsl/mpc8540ads.dts

@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8540ADS";

arch/powerpc/boot/dts/fsl/mpc8541cds.dts

@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8541CDS";

arch/powerpc/boot/dts/fsl/mpc8555cds.dts

@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8555CDS";

arch/powerpc/boot/dts/fsl/mpc8560ads.dts

@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "e500v2_power_isa.dtsi"
+/include/ "e500v1_power_isa.dtsi"
 
 / {
 	model = "MPC8560ADS";

arch/powerpc/kernel/pci_dn.c

@@ -338,6 +338,7 @@ struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
 	INIT_LIST_HEAD(&pdn->list);
 	parent = of_get_parent(dn);
 	pdn->parent = parent ? PCI_DN(parent) : NULL;
+	of_node_put(parent);
 	if (pdn->parent)
 		list_add_tail(&pdn->list, &pdn->parent->child_list);
 

arch/powerpc/math-emu/math_efp.c

@@ -21,6 +21,7 @@
 
 #include <linux/types.h>
 #include <linux/prctl.h>
+#include <linux/module.h>
 
 #include <linux/uaccess.h>
 #include <asm/reg.h>

arch/powerpc/platforms/powernv/opal.c

@@ -740,6 +740,7 @@ static void opal_export_attrs(void)
 	kobj = kobject_create_and_add("exports", opal_kobj);
 	if (!kobj) {
 		pr_warn("kobject_create_and_add() of exports failed\n");
+		of_node_put(np);
 		return;
 	}