amendments to camera connection instructions #3918
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
lurch
reviewed
Nov 11, 2024
| @@ -43,7 +43,8 @@ WARNING: Cameras are sensitive to static. Earth yourself prior to handling the P | |||
|
|
|||
| === Connect the Camera | |||
|
|
|||
| The flex cable inserts into the connector labelled CAMERA on the Raspberry Pi, which is located between the Ethernet and HDMI ports. The cable must be inserted with the silver contacts facing the HDMI port. To open the connector, pull the tabs on the top of the connector upwards, then towards the Ethernet port. The flex cable should be inserted firmly into the connector, with care taken not to bend the flex at too acute an angle. To close the connector, push the top part of the connector towards the HDMI port and down, while holding the flex cable in place. | |||
| The flex cable inserts into the connector labelled CAMERA on the Raspberry Pi, which, on Raspberry Pi models 1-5, is located between the Ethernet and HDMI ports. The cable must be inserted with the metallised contacts facing the internal metallised contacts in the on-board connector. These internal contacts are on the opposite side to the movable tab/clamp/latch. The correct cable orientation can be achieved by ensuring that the plastic stiffener on the end of the cable is in contact with the tab/clamp/latch. To open the connector, pull the tabs on the top of the connector upwards, then away from the fixed body of the connector. The flex cable should be inserted firmly and squarely into the connector, with care taken not to bend the flex at too acute an angle. To close the connector, push the top part of the connector evenly and firmly until it latches, while holding the flex cable in place. | |||
There was a problem hiding this comment.
"labelled CAMERA on the Raspberry Pi" -> "labelled CAMERA on the Raspberry Pi (or labelled CAM/DISP on Raspberry Pi 5)" ?
There was a problem hiding this comment.
"These internal contacts are on the opposite side to the movable tab/clamp/latch." -> "These internal contacts are always on the opposite side to the movable tab/clamp/latch." ? (Added "always" because this is also true for Pi Zero / Zero 2, and also true for the "camera" end of the cable.)
|
This pull request has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Hopefully ** some rough proposed changes to the camera connection section.
**Not a regular github user!
Edit..Addresses #3915