Tado climate device (home-assistant#8041)

* added default parameter

* zone overlay can be set with or without a temperature and with or without a duration. Duration is not supported by hass

* Fixes issue home-assistant#7059 with missing sensorDataPoints

* Fixes issue home-assistant#6943 added ac_mode

* ac_mode cases
* added fan modes
* changed handling of device state OFF

* fixed an error initializing a dictionary (home-assistant#6943)

* changed pytado version

* activated pytado debugging

* Changed pyTado version

* mytado.com changed authentication challenge

* Fixed linelength and whitespace issues

* requirements to pytado changed

homeassistant/components/climate/tado.py

@@ -24,6 +24,17 @@
 # the temperature will be reset after a timespan
 CONST_OVERLAY_TIMER = 'TIMER'
 
+CONST_MODE_FAN_HIGH = 'HIGH'
+CONST_MODE_FAN_MIDDLE = 'MIDDLE'
+CONST_MODE_FAN_LOW = 'LOW'
+
+FAN_MODES_LIST = {
+    CONST_MODE_FAN_HIGH: 'High',
+    CONST_MODE_FAN_MIDDLE: 'Middle',
+    CONST_MODE_FAN_LOW: 'Low',
+    CONST_MODE_OFF: 'Off',
+}
+
 OPERATION_LIST = {
     CONST_OVERLAY_MANUAL: 'Manual',
     CONST_OVERLAY_TIMER: 'Timer',
@@ -60,9 +71,15 @@ def create_climate_device(tado, hass, zone, name, zone_id):
     capabilities = tado.get_capabilities(zone_id)
 
     unit = TEMP_CELSIUS
-    min_temp = float(capabilities['temperatures']['celsius']['min'])
-    max_temp = float(capabilities['temperatures']['celsius']['max'])
-    ac_mode = capabilities['type'] != 'HEATING'
+    ac_mode = capabilities['type'] == 'AIR_CONDITIONING'
+
+    if ac_mode:
+        temperatures = capabilities['HEAT']['temperatures']
+    else:
+        temperatures = capabilities['temperatures']
+
+    min_temp = float(temperatures['celsius']['min'])
+    max_temp = float(temperatures['celsius']['max'])
 
     data_id = 'zone {} {}'.format(name, zone_id)
     device = TadoClimate(tado,
@@ -107,7 +124,9 @@ def __init__(self, store, zone_name, zone_id, data_id,
         self._max_temp = max_temp
         self._target_temp = None
         self._tolerance = tolerance
+        self._cooling = False
 
+        self._current_fan = CONST_MODE_OFF
         self._current_operation = CONST_MODE_SMART_SCHEDULE
         self._overlay_mode = CONST_MODE_SMART_SCHEDULE
 
@@ -129,13 +148,32 @@ def current_temperature(self):
     @property
     def current_operation(self):
         """Return current readable operation mode."""
-        return OPERATION_LIST.get(self._current_operation)
+        if self._cooling:
+            return "Cooling"
+        else:
+            return OPERATION_LIST.get(self._current_operation)
 
     @property
     def operation_list(self):
         """Return the list of available operation modes (readable)."""
         return list(OPERATION_LIST.values())
 
+    @property
+    def current_fan_mode(self):
+        """Return the fan setting."""
+        if self.ac_mode:
+            return FAN_MODES_LIST.get(self._current_fan)
+        else:
+            return None
+
+    @property
+    def fan_list(self):
+        """List of available fan modes."""
+        if self.ac_mode:
+            return list(FAN_MODES_LIST.values())
+        else:
+            return None
+
     @property
     def temperature_unit(self):
         """Return the unit of measurement used by the platform."""
@@ -205,27 +243,27 @@ def update(self):
 
         if 'sensorDataPoints' in data:
             sensor_data = data['sensorDataPoints']
-            temperature = float(
-                sensor_data['insideTemperature']['celsius'])
-            humidity = float(
-                sensor_data['humidity']['percentage'])
-            setting = 0
+
+            unit = TEMP_CELSIUS
+
+            if 'insideTemperature' in sensor_data:
+                temperature = float(
+                    sensor_data['insideTemperature']['celsius'])
+                self._cur_temp = self.hass.config.units.temperature(
+                    temperature, unit)
+
+            if 'humidity' in sensor_data:
+                humidity = float(
+                    sensor_data['humidity']['percentage'])
+                self._cur_humidity = humidity
 
             # temperature setting will not exist when device is off
             if 'temperature' in data['setting'] and \
                     data['setting']['temperature'] is not None:
                 setting = float(
                     data['setting']['temperature']['celsius'])
-
-            unit = TEMP_CELSIUS
-
-            self._cur_temp = self.hass.config.units.temperature(
-                temperature, unit)
-
-            self._target_temp = self.hass.config.units.temperature(
-                setting, unit)
-
-            self._cur_humidity = humidity
+                self._target_temp = self.hass.config.units.temperature(
+                    setting, unit)
 
         if 'tadoMode' in data:
             mode = data['tadoMode']
@@ -235,29 +273,39 @@ def update(self):
             power = data['setting']['power']
             if power == 'OFF':
                 self._current_operation = CONST_MODE_OFF
+                self._current_fan = CONST_MODE_OFF
+                # There is no overlay, the mode will always be
+                # "SMART_SCHEDULE"
+                self._overlay_mode = CONST_MODE_SMART_SCHEDULE
                 self._device_is_active = False
             else:
                 self._device_is_active = True
 
-        if 'overlay' in data and data['overlay'] is not None:
-            overlay = True
-            termination = data['overlay']['termination']['type']
-        else:
+        if self._device_is_active:
             overlay = False
-            termination = ""
+            overlay_data = None
+            termination = self._current_operation
+            cooling = False
+            fan_speed = CONST_MODE_OFF
+
+            if 'overlay' in data:
+                overlay_data = data['overlay']
+                overlay = overlay_data is not None
 
-        # If you set mode manualy to off, there will be an overlay
-        # and a termination, but we want to see the mode "OFF"
+            if overlay:
+                termination = overlay_data['termination']['type']
+
+                if 'setting' in overlay_data:
+                    cooling = overlay_data['setting']['mode'] == 'COOL'
+                    fan_speed = overlay_data['setting']['fanSpeed']
+
+            # If you set mode manualy to off, there will be an overlay
+            # and a termination, but we want to see the mode "OFF"
 
-        if overlay and self._device_is_active:
-            # There is an overlay the device is on
             self._overlay_mode = termination
             self._current_operation = termination
-        else:
-            # There is no overlay, the mode will always be
-            # "SMART_SCHEDULE"
-            self._overlay_mode = CONST_MODE_SMART_SCHEDULE
-            self._current_operation = CONST_MODE_SMART_SCHEDULE
+            self._cooling = cooling
+            self._current_fan = fan_speed
 
     def _control_heating(self):
         """Send new target temperature to mytado."""

homeassistant/components/tado.py

@@ -16,8 +16,8 @@
 from homeassistant.util import Throttle
 
 REQUIREMENTS = ['https://github.com/wmalgadey/PyTado/archive/'
-                '0.1.10.zip#'
-                'PyTado==0.1.10']
+                '0.2.1.zip#'
+                'PyTado==0.2.1']
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -47,6 +47,7 @@ def setup(hass, config):
 
     try:
         tado = Tado(username, password)
+        tado.setDebugging(True)
     except (RuntimeError, urllib.error.HTTPError):
         _LOGGER.error("Unable to connect to mytado with username and password")
         return False

requirements_all.txt

@@ -307,7 +307,7 @@ https://github.com/soldag/pyflic/archive/0.4.zip#pyflic==0.4
 https://github.com/tfriedel/python-lightify/archive/1bb1db0e7bd5b14304d7bb267e2398cd5160df46.zip#lightify==1.0.5
 
 # homeassistant.components.tado
-https://github.com/wmalgadey/PyTado/archive/0.1.10.zip#PyTado==0.1.10
+https://github.com/wmalgadey/PyTado/archive/0.2.1.zip#PyTado==0.2.1
 
 # homeassistant.components.media_player.lg_netcast
 https://github.com/wokar/pylgnetcast/archive/v0.2.0.zip#pylgnetcast==0.2.0