Enable Sender and Receiver Reports by default

examples/ice-tcp/main.go

@@ -18,11 +18,6 @@ func doSignaling(w http.ResponseWriter, r *http.Request) {
 	var err error
 
 	if peerConnection == nil {
-		m := webrtc.MediaEngine{}
-		if err = m.RegisterDefaultCodecs(); err != nil {
-			panic(err)
-		}
-
 		settingEngine := webrtc.SettingEngine{}
 
 		// Enable support only for TCP ICE candidates.
@@ -46,10 +41,7 @@ func doSignaling(w http.ResponseWriter, r *http.Request) {
 		tcpMux := webrtc.NewICETCPMux(nil, tcpListener, 8)
 		settingEngine.SetICETCPMux(tcpMux)
 
-		api := webrtc.NewAPI(
-			webrtc.WithMediaEngine(&m),
-			webrtc.WithSettingEngine(settingEngine),
-		)
+		api := webrtc.NewAPI(webrtc.WithSettingEngine(settingEngine))
 		if peerConnection, err = api.NewPeerConnection(webrtc.Configuration{}); err != nil {
 			panic(err)
 		}

examples/reflect/main.go

@@ -6,6 +6,7 @@ import (
 	"fmt"
 	"time"
 
+	"github.com/pion/interceptor"
 	"github.com/pion/rtcp"
 	"github.com/pion/webrtc/v3"
 	"github.com/pion/webrtc/v3/examples/internal/signal"
@@ -15,7 +16,7 @@ func main() {
 	// Everything below is the Pion WebRTC API! Thanks for using it ❤️.
 
 	// Create a MediaEngine object to configure the supported codec
-	m := webrtc.MediaEngine{}
+	m := &webrtc.MediaEngine{}
 
 	// Setup the codecs you want to use.
 	// We'll use a VP8 and Opus but you can also define your own
@@ -26,8 +27,19 @@ func main() {
 		panic(err)
 	}
 
+	// Create a InterceptorRegistry. This is the user configurable RTP/RTCP Pipeline.
+	// This provides NACKs, RTCP Reports and other features. If you use `webrtc.NewPeerConnection`
+	// this is enabled by default. If you are manually managing You MUST create a InterceptorRegistry
+	// for each PeerConnection.
+	i := &interceptor.Registry{}
+
+	// Use the default set of Interceptors
+	if err := webrtc.RegisterDefaultInterceptors(m, i); err != nil {
+		panic(err)
+	}
+
 	// Create the API object with the MediaEngine
-	api := webrtc.NewAPI(webrtc.WithMediaEngine(&m))
+	api := webrtc.NewAPI(webrtc.WithMediaEngine(m), webrtc.WithInterceptorRegistry(i))
 
 	// Prepare the configuration
 	config := webrtc.Configuration{

examples/rtp-forwarder/README.md

@@ -33,5 +33,7 @@ Run `ffprobe -i rtp-forwarder.sdp -protocol_whitelist file,udp,rtp` to get more
 
 Run `ffplay -i rtp-forwarder.sdp -protocol_whitelist file,udp,rtp` to play your streams
 
+You can add `-fflags nobuffer` to lower the latency. You will have worse playback in networks with jitter.
+
 #### Twitch/RTMP
 `ffmpeg -protocol_whitelist file,udp,rtp -i rtp-forwarder.sdp -c:v libx264 -preset veryfast -b:v 3000k -maxrate 3000k -bufsize 6000k -pix_fmt yuv420p -g 50 -c:a aac -b:a 160k -ac 2 -ar 44100 -f flv rtmp://live.twitch.tv/app/$STREAM_KEY` Make sure to replace `$STREAM_KEY` at the end of the URL first.

examples/rtp-forwarder/main.go

@@ -8,6 +8,7 @@ import (
 	"net"
 	"time"
 
+	"github.com/pion/interceptor"
 	"github.com/pion/rtcp"
 	"github.com/pion/rtp"
 	"github.com/pion/webrtc/v3"
@@ -24,7 +25,7 @@ func main() {
 	// Everything below is the Pion WebRTC API! Thanks for using it ❤️.
 
 	// Create a MediaEngine object to configure the supported codec
-	m := webrtc.MediaEngine{}
+	m := &webrtc.MediaEngine{}
 
 	// Setup the codecs you want to use.
 	// We'll use a VP8 and Opus but you can also define your own
@@ -39,8 +40,19 @@ func main() {
 		panic(err)
 	}
 
+	// Create a InterceptorRegistry. This is the user configurable RTP/RTCP Pipeline.
+	// This provides NACKs, RTCP Reports and other features. If you use `webrtc.NewPeerConnection`
+	// this is enabled by default. If you are manually managing You MUST create a InterceptorRegistry
+	// for each PeerConnection.
+	i := &interceptor.Registry{}
+
+	// Use the default set of Interceptors
+	if err := webrtc.RegisterDefaultInterceptors(m, i); err != nil {
+		panic(err)
+	}
+
 	// Create the API object with the MediaEngine
-	api := webrtc.NewAPI(webrtc.WithMediaEngine(&m))
+	api := webrtc.NewAPI(webrtc.WithMediaEngine(m), webrtc.WithInterceptorRegistry(i))
 
 	// Prepare the configuration
 	config := webrtc.Configuration{

examples/save-to-disk/main.go

@@ -8,6 +8,7 @@ import (
 	"strings"
 	"time"
 
+	"github.com/pion/interceptor"
 	"github.com/pion/rtcp"
 	"github.com/pion/webrtc/v3"
 	"github.com/pion/webrtc/v3/examples/internal/signal"
@@ -38,7 +39,7 @@ func main() {
 	// Everything below is the Pion WebRTC API! Thanks for using it ❤️.
 
 	// Create a MediaEngine object to configure the supported codec
-	m := webrtc.MediaEngine{}
+	m := &webrtc.MediaEngine{}
 
 	// Setup the codecs you want to use.
 	// We'll use a VP8 and Opus but you can also define your own
@@ -55,8 +56,19 @@ func main() {
 		panic(err)
 	}
 
+	// Create a InterceptorRegistry. This is the user configurable RTP/RTCP Pipeline.
+	// This provides NACKs, RTCP Reports and other features. If you use `webrtc.NewPeerConnection`
+	// this is enabled by default. If you are manually managing You MUST create a InterceptorRegistry
+	// for each PeerConnection.
+	i := &interceptor.Registry{}
+
+	// Use the default set of Interceptors
+	if err := webrtc.RegisterDefaultInterceptors(m, i); err != nil {
+		panic(err)
+	}
+
 	// Create the API object with the MediaEngine
-	api := webrtc.NewAPI(webrtc.WithMediaEngine(&m))
+	api := webrtc.NewAPI(webrtc.WithMediaEngine(m), webrtc.WithInterceptorRegistry(i))
 
 	// Prepare the configuration
 	config := webrtc.Configuration{

examples/simulcast/README.md

@@ -1,9 +1,14 @@
 # simulcast
 demonstrates of how to handle incoming track with multiple simulcast rtp streams and show all them back.
 
+The browser will not send higher quality streams unless it has the available bandwidth. You can look at
+the bandwidth estimation in `chrome://webrtc-internals`. It is under `VideoBwe` when `Read Stats From: Legacy non-Standard`
+is selected.
+
 ## Instructions
 ### Download simulcast
 ```
+export GO111MODULE=on
 go get github.com/pion/webrtc/v3/examples/simulcast
 ```
 

examples/simulcast/main.go

@@ -8,6 +8,7 @@ import (
 	"io"
 	"time"
 
+	"github.com/pion/interceptor"
 	"github.com/pion/rtcp"
 	"github.com/pion/webrtc/v3"
 	"github.com/pion/webrtc/v3/examples/internal/signal"
@@ -40,8 +41,19 @@ func main() {
 		}
 	}
 
+	// Create a InterceptorRegistry. This is the user configurable RTP/RTCP Pipeline.
+	// This provides NACKs, RTCP Reports and other features. If you use `webrtc.NewPeerConnection`
+	// this is enabled by default. If you are manually managing You MUST create a InterceptorRegistry
+	// for each PeerConnection.
+	i := &interceptor.Registry{}
+
+	// Use the default set of Interceptors
+	if err := webrtc.RegisterDefaultInterceptors(m, i); err != nil {
+		panic(err)
+	}
+
 	// Create a new RTCPeerConnection
-	peerConnection, err := webrtc.NewAPI(webrtc.WithMediaEngine(m)).NewPeerConnection(config)
+	peerConnection, err := webrtc.NewAPI(webrtc.WithMediaEngine(m), webrtc.WithInterceptorRegistry(i)).NewPeerConnection(config)
 	if err != nil {
 		panic(err)
 	}
@@ -114,11 +126,6 @@ func main() {
 				if writeErr := peerConnection.WriteRTCP([]rtcp.Packet{&rtcp.PictureLossIndication{MediaSSRC: uint32(track.SSRC())}}); writeErr != nil {
 					fmt.Println(writeErr)
 				}
-				// Send a remb message with a very high bandwidth to trigger chrome to send also the high bitrate stream
-				fmt.Printf("Sending remb for stream with rid: %q, ssrc: %d\n", track.RID(), track.SSRC())
-				if writeErr := peerConnection.WriteRTCP([]rtcp.Packet{&rtcp.ReceiverEstimatedMaximumBitrate{Bitrate: 10000000, SenderSSRC: uint32(track.SSRC())}}); writeErr != nil {
-					fmt.Println(writeErr)
-				}
 			}
 		}()
 		for {

go.mod

@@ -8,7 +8,7 @@ require (
 	github.com/pion/datachannel v1.4.21
 	github.com/pion/dtls/v2 v2.0.7
 	github.com/pion/ice/v2 v2.0.15
-	github.com/pion/interceptor v0.0.9
+	github.com/pion/interceptor v0.0.10
 	github.com/pion/logging v0.2.2
 	github.com/pion/randutil v0.1.0
 	github.com/pion/rtcp v1.2.6

go.sum

@@ -42,8 +42,8 @@ github.com/pion/dtls/v2 v2.0.7 h1:PNcUs/G1l9hb4jzMEorgFMxIBdp7fRN4LIApOTMtCYs=
 github.com/pion/dtls/v2 v2.0.7/go.mod h1:QuDII+8FVvk9Dp5t5vYIMTo7hh7uBkra+8QIm7QGm10=
 github.com/pion/ice/v2 v2.0.15 h1:KZrwa2ciL9od8+TUVJiYTNsCW9J5lktBjGwW1MacEnQ=
 github.com/pion/ice/v2 v2.0.15/go.mod h1:ZIiVGevpgAxF/cXiIVmuIUtCb3Xs4gCzCbXB6+nFkSI=
-github.com/pion/interceptor v0.0.9 h1:fk5hTdyLO3KURQsf/+RjMpEm4NE3yeTY9Kh97b5BvwA=
-github.com/pion/interceptor v0.0.9/go.mod h1:dHgEP5dtxOTf21MObuBAjJeAayPxLUAZjerGH8Xr07c=
+github.com/pion/interceptor v0.0.10 h1:dXFyFWRJFwmzQqyn0U8dUAbOJu+JJnMVAqxmvTu30B4=
+github.com/pion/interceptor v0.0.10/go.mod h1:qzeuWuD/ZXvPqOnxNcnhWfkCZ2e1kwwslicyyPnhoK4=
 github.com/pion/logging v0.2.2 h1:M9+AIj/+pxNsDfAT64+MAVgJO0rsyLnoJKCqf//DoeY=
 github.com/pion/logging v0.2.2/go.mod h1:k0/tDVsRCX2Mb2ZEmTqNa7CWsQPc+YYCB7Q+5pahoms=
 github.com/pion/mdns v0.0.4 h1:O4vvVqr4DGX63vzmO6Fw9vpy3lfztVWHGCQfyw0ZLSY=

interceptor.go

@@ -7,6 +7,7 @@ import (
 
 	"github.com/pion/interceptor"
 	"github.com/pion/interceptor/pkg/nack"
+	"github.com/pion/interceptor/pkg/report"
 	"github.com/pion/rtp"
 )
 
@@ -18,6 +19,27 @@ func RegisterDefaultInterceptors(mediaEngine *MediaEngine, interceptorRegistry *
 		return err
 	}
 
+	if err := ConfigureRTCPReports(interceptorRegistry); err != nil {
+		return err
+	}
+
+	return nil
+}
+
+// ConfigureRTCPReports will setup everything necessary for generating Sender and Receiver Reports
+func ConfigureRTCPReports(interceptorRegistry *interceptor.Registry) error {
+	reciver, err := report.NewReceiverInterceptor()
+	if err != nil {
+		return err
+	}
+
+	sender, err := report.NewSenderInterceptor()
+	if err != nil {
+		return err
+	}
+
+	interceptorRegistry.Add(reciver)
+	interceptorRegistry.Add(sender)
 	return nil
 }