- Based on GTKTerm
- Original code © Julien Schmitt http://www.jls-info.com/julien/linux
- Improvements by Zach Davis https://fedorahosted.org/gtkterm/
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.
--help or -h : this help screen
--config <configuration> or -c : load configuration
--port <device> or -p : serial port device (default /dev/ttyS0)
--speed <speed> or -s : serial port speed (default 9600)
--bits <bits> or -b : number of bits (default 8)
--stopbits <stopbits> or -t : number of stopbits (default 1)
--parity <odd | even> or -a : parity (default none)
--flow <Xon | CTS> or -w : flow control (default none)
--delay <ms> or -d : end of line delay in ms (default none)
--char <char> or -r : wait for a special char at end of line (default none)
--file <filename> or -f : default file to send (default none)
--echo or -e : switch on local echo
As Sellerie is often used like a terminal emulator,
the shortcut keys are assigned to <ctrl><shift>, rather than just
<ctrl>. This allows the user to send keystrokes of the form <ctrl>X
and not have Sellerie intercept them.
<ctrl><shift>L-- Clear screen<ctrl><shift>R-- Send file<ctrl><shift>Q-- Quit<ctrl><shift>S-- Configure port<ctrl><shift>V-- Paste<ctrl><shift>C-- Copy<ctrl>B-- Send break
The RS485 flow control is a software user-space emulation and therefore may not work for all configurations (won't respond quickly enough). If this is the case for your setup, you will need to either use a dedicated RS232 to RS485 converter, or look for a kernel level driver. This is an inherent limitation to user space programs.
Sellerie has a few dependencies:
- Gtk+4 (version 4.4 or higher)
- vte 2.91-gtk4 (version 0.69 or higher, if not available will be pulled in through meson submodule)
Once these dependencies are installed, most people should simply run:
meson build
ninja -C build
And to install:
ninja -C build install
If you wish to install Sellerie someplace other than the default directory, use:
meson build -Dprefix=/install/directory
for an unconfigured build or
meson config build -Dprefix=/install/directory
for an already existing build.
Then build and install as usual.
