PS-9453: percona_telemetry causes a long wait on COND_thd_list due to…

… the absence of the root user

https://perconadev.atlassian.net/browse/PS-9453

Problem:
If there is no 'root' user (it was renamed) and Percona Telemetry is
disabled, server shutdown stuck.
Additionally SHOW PROCESSLIST reports increasing number of processes
with root user in state 'login'.

Cause:
Percona Telemetry component used hard codded 'root' user used for
querying the server for metrics. If the user is not present,
mysql_command_factory service connect() method fails, however it leaves
opened/orphaned internal MYSQL_SESSION. It is because after opening
MYSQL_SESSION we check if the user exists. It doesn't exist, so the
method returns with STATE_MACHINE_FAILED error.
Caller does not know anything about underlying session, does cleanup,
frees memory. Moreover, the same problem potentially exists even if
the user exists, but cssm_begin_connect() exits with error for any
reason.
Creation of session registers THD object in Global_THD_manager. That's
why increasing number of processes is visible in SHOW PROCESSLIST.

Why it hangs during shutdown:
During shutdown, the server waits for signal handler thread
(signal_hand()) to join the main thread. Then the component
infrastructure is deinitialized. At the same time signal_hand() waits
for all threads to finish Global_THD_manager::wait_till_no_thd().

The above described bug related to orphaned mysql sessions cause that
there are orphaned THDs that never end. This causes server to wait
infinitively.

Solution:
1. Handle the error in cssm_begin_connect() and close opened
MYSQL_SESSION. This part fixes hangs caused by nonexistent user.
2. Percona Telemetry Component uses mysql.session user. When Percona
Telemetry Component is enabled, the user is granted a few more
permissions during the server startup. Note that even without this
permissions, the component is able to work, but not able to report some
metrics.

Additionally fixed potential memory leak if connection setup in Percona
Telemetry Component fails.

components/percona_telemetry/data_provider.cc

@@ -23,6 +23,20 @@
 namespace {
 inline const char *b2s(bool val) { return val ? "1" : "0"; }
 
+/*
+  mysql.session user is mostly enough, but it lacks the following privileges:
+
+  1. REPLICATION SLAVE
+  2. REPLICATION CLIENT
+  3. SELECT on mysql.component
+  4. SELECT on performance_schema.replication_group_members
+
+  These privileges are added at server startup in setup_percona_telemetry()
+  if Percona telemetry is enabled.
+*/
+constexpr const char default_command_user_name[] = "mysql.session";
+constexpr const char default_command_host_name[] = "localhost";
+
 namespace JSONKey {
 const char *pillar_version = "pillar_version";
 const char *db_instance_id = "db_instance_id";
@@ -120,25 +134,29 @@ bool DataProvider::do_query(const std::string &query, QueryResult *result,
   }
   result->clear();
 
+  /* command_factory_service_.init() allocates memory for mysql_h
+    We need to call close() always.
+    Even if init() fails, becaues it doesn't allocate anything, calling close()
+    is safe, because internally it checks if provided pointer is valid
+  */
+  std::shared_ptr<MYSQL_H> mysql_h_close_guard(
+      &mysql_h, [&srv = command_factory_service_](MYSQL_H *ptr) {
+        srv.close(*ptr);
+      });
+
   mysql_service_status_t sstatus = command_factory_service_.init(&mysql_h);
+
   if (!sstatus)
     sstatus |=
         command_options_service_.set(mysql_h, MYSQL_COMMAND_PROTOCOL, nullptr);
   if (!sstatus)
-    sstatus |=
-        command_options_service_.set(mysql_h, MYSQL_COMMAND_USER_NAME, "root");
+    sstatus |= command_options_service_.set(mysql_h, MYSQL_COMMAND_USER_NAME,
+                                            default_command_user_name);
   if (!sstatus)
-    sstatus |=
-        command_options_service_.set(mysql_h, MYSQL_COMMAND_HOST_NAME, nullptr);
+    sstatus |= command_options_service_.set(mysql_h, MYSQL_COMMAND_HOST_NAME,
+                                            default_command_host_name);
   if (!sstatus) sstatus |= command_factory_service_.connect(mysql_h);
 
-  // starting from this point, if the above succeeded we need to close mysql_h.
-  std::shared_ptr<void> mysql_h_close_guard(
-      mysql_h,
-      [&srv = command_factory_service_, do_close = !sstatus](void *ptr) {
-        if (do_close && ptr) srv.close(static_cast<MYSQL_H>(ptr));
-      });
-
   // if any of the above failed, just exit
   if (sstatus) {
     goto err;
@@ -212,7 +230,7 @@ bool DataProvider::collect_db_instance_id_info(rapidjson::Document *document) {
         so the SQL query failed. It will recover next time.
      2. Some other reason that caused selecting server_id to fail. */
   if (id.length() == 0) {
-    logger_.warning(
+    logger_.info(
         "Collecting db_instance_id failed. It may be caused by server still "
         "initializing.");
     return true;
@@ -346,7 +364,7 @@ bool DataProvider::collect_se_usage_info(rapidjson::Document *document) {
   QueryResult result;
   if (do_query("SELECT DISTINCT ENGINE FROM information_schema.tables WHERE "
                "table_schema NOT IN('mysql', 'information_schema', "
-               "'performance_schema', 'sys');",
+               "'performance_schema', 'sys')",
                &result)) {
     return true;
   }

mysql-test/suite/component_percona_telemetry/r/no_user.result

@@ -0,0 +1,31 @@
+SELECT * FROM information_schema.table_privileges WHERE grantee = "'mysql.session'@'localhost'" ORDER BY table_schema, table_name;
+GRANTEE	TABLE_CATALOG	TABLE_SCHEMA	TABLE_NAME	PRIVILEGE_TYPE	IS_GRANTABLE
+'mysql.session'@'localhost'	def	mysql	component	SELECT	NO
+'mysql.session'@'localhost'	def	mysql	user	SELECT	NO
+'mysql.session'@'localhost'	def	performance_schema	replication_group_members	SELECT	NO
+SHOW GRANTS FOR 'mysql.session'@'localhost';
+Grants for mysql.session@localhost
+GRANT SHUTDOWN, SUPER, REPLICATION SLAVE, REPLICATION CLIENT ON *.* TO `mysql.session`@`localhost`
+GRANT AUDIT_ABORT_EXEMPT,AUTHENTICATION_POLICY_ADMIN,BACKUP_ADMIN,CLONE_ADMIN,CONNECTION_ADMIN,FIREWALL_EXEMPT,PERSIST_RO_VARIABLES_ADMIN,SESSION_VARIABLES_ADMIN,SYSTEM_USER,SYSTEM_VARIABLES_ADMIN ON *.* TO `mysql.session`@`localhost`
+GRANT SELECT ON `performance_schema`.* TO `mysql.session`@`localhost`
+GRANT SELECT ON `mysql`.`component` TO `mysql.session`@`localhost`
+GRANT SELECT ON `mysql`.`user` TO `mysql.session`@`localhost`
+GRANT SELECT ON `performance_schema`.`replication_group_members` TO `mysql.session`@`localhost`
+# restart:--percona_telemetry.grace_interval=30 --percona_telemetry.scrape_interval=30 --percona_telemetry.telemetry_root_dir=<telemetry_root_dir>
+RENAME USER 'root'@'localhost' to 'root.tmp'@'localhost';
+Warnings:
+Warning	4005	User 'root'@'localhost' is referenced as a definer account in a stored routine.
+Warning	4005	User 'root'@'localhost' is referenced as a definer account in a trigger.
+'root' user used by component's 1st verison does not exist. Telemetry dir should contain 1 file.
+1
+RENAME USER 'root.tmp'@'localhost' to 'root'@'localhost';
+Warnings:
+Warning	4005	User 'root'@'localhost' is referenced as a definer account in a stored routine.
+Warning	4005	User 'root'@'localhost' is referenced as a definer account in a trigger.
+# restart:--percona_telemetry.grace_interval=30 --percona_telemetry.scrape_interval=30 --percona_telemetry.telemetry_root_dir=<telemetry_root_dir>
+RENAME USER 'mysql.session'@'localhost' to 'mysql.session.tmp'@'localhost';
+include/assert.inc [No orphaned sessions expected in processlist]
+'mysql.session' user used by component does not exist. Telemetry dir should still contain 1 file.
+1
+RENAME USER 'mysql.session.tmp'@'localhost' to 'mysql.session'@'localhost';
+# restart:--percona_telemetry.grace_interval=30 --percona_telemetry.scrape_interval=30 --percona_telemetry.telemetry_root_dir=<telemetry_root_dir>

mysql-test/suite/component_percona_telemetry/t/no_user.test

@@ -0,0 +1,70 @@
+# Test that lack of the user used by Percona Telemetry Component
+# doesn't cause hangs during server restart and no orphaned sessions are created.
+
+--source include/have_percona_telemetry.inc
+
+--let $telemetry_root_dir = $MYSQL_TMP_DIR/telemetry_dir
+--let $grace_interval = 30
+--let $scrape_interval = 30
+
+--mkdir $telemetry_root_dir
+
+# Record mysql.session user privileges
+SELECT * FROM information_schema.table_privileges WHERE grantee = "'mysql.session'@'localhost'" ORDER BY table_schema, table_name;
+SHOW GRANTS FOR 'mysql.session'@'localhost';
+
+# restart the server with custom telemetry file path and timeouts
+--let $restart_parameters = "restart:--percona_telemetry.grace_interval=$grace_interval --percona_telemetry.scrape_interval=$scrape_interval --percona_telemetry.telemetry_root_dir=$telemetry_root_dir"
+--replace_regex /telemetry_root_dir=.*telemetry_dir/telemetry_root_dir=<telemetry_root_dir>/
+--source include/restart_mysqld.inc
+
+# Rename 'root' user (1st version of Percona Telemetry Component used 'root' user)
+# 1st version will not collect any data and will not create telemetry file and the restart will hang.
+# Fixed version will work properly as it doesn't use 'root' user.
+RENAME USER 'root'@'localhost' to 'root.tmp'@'localhost';
+
+# sleep more than grace_interval and check that telemetry file was created
+--let $timeout = `select $grace_interval + 10`
+--sleep $timeout
+
+--echo 'root' user used by component's 1st verison does not exist. Telemetry dir should contain 1 file.
+--exec ls -1 $telemetry_root_dir | wc -l
+
+#
+# It should be possible to restart the server.
+#
+RENAME USER 'root.tmp'@'localhost' to 'root'@'localhost';
+--let $restart_parameters = "restart:--percona_telemetry.grace_interval=$grace_interval --percona_telemetry.scrape_interval=$scrape_interval --percona_telemetry.telemetry_root_dir=$telemetry_root_dir"
+--replace_regex /telemetry_root_dir=.*telemetry_dir/telemetry_root_dir=<telemetry_root_dir>/
+--source include/restart_mysqld.inc
+
+
+#
+# Now rename the user used by component
+#
+RENAME USER 'mysql.session'@'localhost' to 'mysql.session.tmp'@'localhost';
+
+# Wait a few cycles and ensure that SHOW PROCESSLIST does not contain rows related to orphaned sessions.
+--let $timeout = `select $grace_interval + 3 * $scrape_interval`
+--sleep $timeout
+
+--let $assert_text = No orphaned sessions expected in processlist
+--let $assert_cond = [SELECT COUNT(*) as Result FROM performance_schema.processlist WHERE user = "mysql.session";, Result, 1] = 0
+--source include/assert.inc
+
+# Hheck that no new telemetry file was created
+--echo 'mysql.session' user used by component does not exist. Telemetry dir should still contain 1 file.
+--exec ls -1 $telemetry_root_dir | wc -l
+
+
+#
+# It should be still possible to restart the server.
+#
+RENAME USER 'mysql.session.tmp'@'localhost' to 'mysql.session'@'localhost';
+--let $restart_parameters = "restart:--percona_telemetry.grace_interval=$grace_interval --percona_telemetry.scrape_interval=$scrape_interval --percona_telemetry.telemetry_root_dir=$telemetry_root_dir"
+--replace_regex /telemetry_root_dir=.*telemetry_dir/telemetry_root_dir=<telemetry_root_dir>/
+--source include/restart_mysqld.inc
+
+# cleanup
+--force-rmdir $telemetry_root_dir
+

sql/dd/impl/upgrade/server.cc

@@ -959,6 +959,15 @@ bool upgrade_system_schemas(THD *thd) {
 /* 1. We INSERT INTO, because prepared statements do not support
       INSTALL COMPONENT
    2. We use stored procedure to be able to do conditional action.
+   3. Percona Telemetry Component uses mysql.session user. For the component to
+      be fully functional, mysql.session user lacks the following privileges:
+        1. REPLICATION SLAVE
+        2. REPLICATION CLIENT
+        3. SELECT on mysql.component
+        4. SELECT on performance_schema.replication_group_members
+      GRANT does not work yet as ACL is not initialized yet. Use UPDATES.
+      For 3 and 4 we could set Select_priv = 'Y' in mysql.user table for
+      mysql.session user, but let's allow only minimal required privileges.
 */
 static const char *percona_telemetry_install[] = {
     "USE mysql;\n",
@@ -977,6 +986,15 @@ static const char *percona_telemetry_install[] = {
     "PREPARE stmt FROM @str;\n",
     "EXECUTE stmt;\n",
     "DROP PREPARE stmt;\n",
+    "UPDATE mysql.user SET Repl_slave_priv = 'Y' WHERE User = 'mysql.session' "
+    "AND Host = 'localhost';\n",
+    "UPDATE mysql.user SET Repl_client_priv = 'Y' WHERE User = 'mysql.session' "
+    "AND Host = 'localhost';\n",
+    "INSERT IGNORE INTO mysql.tables_priv VALUES ('localhost', 'mysql', "
+    "'mysql.session', 'component', 'root@localhost', NOW(), 'Select', '');\n",
+    "INSERT IGNORE INTO mysql.tables_priv VALUES ('localhost', "
+    "'performance_schema', 'mysql.session', 'replication_group_members', "
+    "'root@localhost', NOW(), 'Select', '');\n",
     NULL};
 
 static const char *percona_telemetry_uninstall[] = {

sql/server_component/mysql_command_backend.cc

@@ -75,6 +75,21 @@ mysql_state_machine_status cssm_begin_connect(mysql_async_connect *ctx) {
   my_h_service h_command_consumer_srv = nullptr;
 
   MYSQL_SESSION mysql_session = nullptr;
+
+  /* We need to handle the failure in this function.
+     Setting mcs_extn->session_svc right after session open is not enough
+     to handle user lookup errors (and following errors as well)
+     because in case of this function returns error, mysql->extension is
+     cleaned up immediately by the caller. The caller does not take care of
+     session_svc, because it is not aware of this structure.
+  */
+  std::shared_ptr<MYSQL_SESSION> mysql_session_close_guard(
+      &mysql_session, [mcs_extn](MYSQL_SESSION *mysql_session_ptr) {
+        if (*mysql_session_ptr == nullptr) return;
+        mcs_extn->session_svc = nullptr;
+        srv_session_close(*mysql_session_ptr);
+      });
+
   if (mcs_extn->mcs_thd == nullptr || mcs_extn->session_svc == nullptr) {
     /*
      Avoid possibility of nested txn in the current thd.
@@ -239,6 +254,7 @@ mysql_state_machine_status cssm_begin_connect(mysql_async_connect *ctx) {
   }
   mysql->client_flag = 0; /* For handshake */
   mysql->server_status = SERVER_STATUS_AUTOCOMMIT;
+  mysql_session = nullptr;  // disable delete quard
   return STATE_MACHINE_DONE;
 }
 

unittest/gunit/components/percona_telemetry/data_provider-t.cc

@@ -287,7 +287,7 @@ TEST_F(DataProviderTest, collect_se_usage_info_test) {
   const std::string query(
       std::string("SELECT DISTINCT ENGINE FROM information_schema.tables WHERE "
                   "table_schema NOT IN('mysql', 'information_schema', "
-                  "'performance_schema', 'sys');"));
+                  "'performance_schema', 'sys')"));
   const std::string expected_json_key("se_engines_in_use");
   collect_array_info_common(query, expected_json_key,
                             &MockDataProvider::collect_se_usage_info);