Bloguetrónica
Change the repository type filter
All
Repositories list
42 repositories
mcp2210-com
Publiccp2130-conf-library
Publicmcp2210-conf-library
Publicmcp2210-conf
Publiccp2130-qt
PublicA C++ class that uses libusb to interface with CP2130 devices. It can be used to configure the OTP ROM of such devices, as well as to control them. The class was made for Qt. If you wish to use a derived non-Qt version, please refer to https://github.com/bloguetronica/cp2130.cp2130
PublicA C++ class that uses libusb to interface with CP2130 devices. It can be used to configure the OTP ROM of such devices, as well as to control them. This class was originally derived from the corresponding class for Qt. Please refer to https://github.com/bloguetronica/cp2130-qt if you wish to use the original class instead.mcp2210-qt
PublicA C++ class that uses libusb to interface with MCP2210 devices. It can be used to control the several aspects, such as NVRAM or volatile configurations, GPIO directions and states, or to perform SPI transfers. Note that this is a class variant made specifically for Qt. If you wish to use the original, non-Qt variant, please refer to https://gith…mcp2210
Publiccp2130-conf
PublicCP2130 Configurator (cp2130-conf) is an application that can be used to configure CP2130 devices, including VID, PID, as well as other descriptors. Most importantly, the application allows you to configure pin functions and states.itusb1-mngr
Publicfau201-r1-conf
Publicfau201-r0-conf
Publicfau200-r1-conf
Publicfau200-r0-conf
Publicgf2-ra-conf
Publicgf2-r0-conf
Publicgf1-ra-conf
Publicgf1-r0-conf
Publicitusb1-ra-conf
Publicfau201device
PublicThis is a C++ class that depends on the CP2130 class (https://github.com/bloguetronica/cp2130). It is used to control FAU201 Power Supply devices.gf2device
Publicgf1device
Publicfau201-gui
PublicFAU201 GUI is a graphical interface for the FAU201 Power Supply. It works by invoking commands, which in turn control the function generator. Thus, being only a front-end, it requires the commands to be installed in order to have an effect.fau200-gui
PublicFAU200 GUI is a graphical interface for the FAU200 Power Supply. It works by invoking commands, which in turn control the function generator. Thus, being only a front-end, it requires the commands to be installed in order to have an effect.gf2-gui
PublicGF2 GUI is a graphical interface for the GF2 Function Generator. It works by invoking commands, which in turn control the function generator. Thus, being only a front-end, it requires the commands to be installed in order to have an effect.gf1-gui
PublicGF1 GUI is a graphical interface for the GF1 Function Generator. It works by invoking commands, which in turn control the function generator. Thus, being only a front-end, it requires the commands to be installed in order to have an effect.cp2130-com
PublicCP2130 Commander (cp2130-com) is a graphical application that can be used to control and interact with CP2130 devices. Among other tasks, it allows you to perform SPI writes and reads, while also providing a way to monitor and control GPIO pins.gf2
Publicgf1
Publicfau201
Public