-
Notifications
You must be signed in to change notification settings - Fork 12
AM6 Rack
Grant edited this page Dec 28, 2022
·
84 revisions
| Rack # | Equipment | Network 1 | Network 2 | OOB Network | Power 1 | Power 2 | Notes |
|---|---|---|---|---|---|---|---|
| 47 | Patch panel PP:1625:1131589 | ||||||
| 46 | Cable organizer | ||||||
| 45 | |||||||
| 44 | Boxes on Shelf | ||||||
| 43 | Boxes on Shelf | ||||||
| 42 | Boxes on Shelf | ||||||
| 41 | Boxes on Shelf | ||||||
| 40 | Boxes on Shelf | ||||||
| 39 | Boxes on Shelf | ||||||
| 38 | Boxes on Shelf | ||||||
| 37 | Boxes on Shelf | ||||||
| 36 | Boxes on Shelf | ||||||
| 35 | Boxes on Shelf | ||||||
| 34 | Boxes on Shelf | ||||||
| 33 | Shelf | ||||||
| 32 | tabaluga | SW1-2 (ge0/0/1) | SW2-2 (ge1/0/1) | SW2-25 (ge-1/0/24) | A1: 500W 720478-B21 | B1: 500W 720478-B21 | |
| 31 | |||||||
| 30 | |||||||
| 29 | |||||||
| 28 | |||||||
| 27 | |||||||
| 26 | |||||||
| 25 | |||||||
| 24 | |||||||
| 23 | Juniper SW1 (front) | Optical to Patch port 1 | A12: 350W PSU | B12: 350W PSU | |||
| 22 | Juniper SW2 (front) | Optical Pending | A13: 350W PSU | B13: 350W PSU | |||
| 21 | |||||||
| 20 | |||||||
| 19 | odin | SW1-3 (ge-0/0/2) | SW2-3 (ge-1/0/2) | SW1-31 (ge-0/0/30) | A10: 700W PWS-706P-1R | B10: 700W PWS-706P-1R | |
| 18 | norbert | SW1-4 (ge-0/0/3) | SW2-4 (ge-1/0/3) | SW2-30 (ge-1/0/29) | A11: 1200W PWS-1K22A-1R | B11: 1200W PWS-1K22A-1R | Power uses C19/20 to C13/14 cable |
| 17 | FREE FOR PLANNED UPGRADE | SW1-10 (ge-0/0/9) | SW2-10 (ge-1/0/9) | SW2-34 (ge-1/0/33) | A9: 500W | A9: 500W | |
| 16 | dulcy | SW1-23 (ge-0/0/22) | SW2-23 (ge-1/0/22) | SW2-31 (ge-1/0/30) | A17: 1000W PWS-1K02A-1R | B17: 1000W PWS-1K02A-1R | |
| 15 | snap-01 (2U) | SW1-17 (ge-0/0/16) | SW2-17 (ge-1/0/16) | SW1-29 (ge-0/0/28) | A18: 1600W PWS-1K62A-1R | B18: 1600W PWS-1K62A-1R | |
| 14 | snap-01 (2U) | - | - | - | - | - | |
| 13 | spike-08 | SW1-22 (ge-0/0/21) | SW2-22 (ge-1/0/21) | SW1-28 (ge-0/0/27) | A19: 500W 720478-B21 | B19: 500W 720478-B21 | |
| 12 | spike-07 | SW1-19 (ge-0/0/18) | SW2-19 (ge-1/0/18) | SW2-28 (ge-1/0/27) | A14: 500W 720478-B21 | B14: 500W 720478-B21 | |
| 11 | spike-06 | SW1-21 (ge-0/0/20) | SW2-21 (ge-1/0/20) | SW1-32 (ge-0/0/31) | A15: 500W 720478-B21 | B15: 500W 720478-B21 | |
| 10 | |||||||
| 9 | |||||||
| 8 | |||||||
| 7 | |||||||
| 6 | FREE FOR PLANNED UPGRADE | SW1-16 (ge-0/0/15) | SW2-16 (ge-1/0/15) | SW1-35(ge-0/0/34) | A20: 500W | B20: 500W | |
| 5 | faffy | SW1-24 (ge-0/0/23) | SW2-24 (ge-1/0/23) | SW1-30 (ge-0/0/29) | A21: 800W 720479-B21 | B21: 800W 720479-B21 | 2 free NVMe bays, trays required |
| 4 | karm (2U) | SW1-20 (ge-0/0/19) | SW2-20 (ge-1/0/19) | SW2-26 (ge-1/0/25) | A22: 1600W PWS-1K62A-1R | B22: 1600W PWS-1K62A-1R | |
| 3 | karm (2U) | - | - | - | - | - | |
| 2 | ironbelly (2U) | SW1-18 (ge-0/0/17) | SW2-18 (ge-1/0/17) | SW2-27 (ge-1/0/26) | A23: 920W PWS-920P-SQ | B23: 920W PWS-920P-SQ | |
| 1 | ironbelly (2U) | - | - | - | - | - | |
| 0 (floor) | oob1 (RPI4) | SW1-26 (ge-0/0/25) | SW2-35 (ge-1/0/34) | - | A24: 15W SC0216 (via UK plug adapter) | B24: 15W SC0443 (via UK plug strip) | Dual Power Adapter. 4G modem above rack |
| left PDU | PDU-A / PDU1 | - | - | SW1-36 (ge-0/0/35) | - | - | |
| right PDU | PDU-B / PDU2 | - | - | SW2-33 (ge-1/0/32) | - | - |
- Black power cables for A side, white power cables for B side
- Black ethernet cables for switch 1 (top), blue ethernet cables for switch 2 (bottom)
- Beige ethernet cables for OOB
- Blue fiber for uplink
- Plugs 8 and 16 on both PDUs are higher current C19 sockets with C19/C19 adapter and are not connected. Ethernet 8 and 16 are left unused on the switches to keep numbering consistent.
- Plug 24 on both PDUs use C19/C13 adapters which are connected to UK sockets. PDU-A is a single socket. PDU-B is a 4x UK socket strip.
- The back of the rack is very tight between the PDUs. It is nearly impossible to take stuff out horizontally out the back of the rack.