-
Notifications
You must be signed in to change notification settings - Fork 12
AM6 Rack
Grant Slater edited this page Dec 6, 2022
·
84 revisions
| Rack # | Equipment | Network 1 | Network 2 | OOB Network | Power 1 | Power 2 | Notes |
|---|---|---|---|---|---|---|---|
| 47 | Patch panel PP:1625:1131589 | ||||||
| 46 | Cable organizer | ||||||
| 45 | |||||||
| 44 | Boxes on Shelf | ||||||
| 43 | Boxes on Shelf | ||||||
| 42 | Boxes on Shelf | ||||||
| 41 | Boxes on Shelf | ||||||
| 40 | Boxes on Shelf | ||||||
| 39 | Boxes on Shelf | ||||||
| 38 | Boxes on Shelf | ||||||
| 37 | Boxes on Shelf | ||||||
| 36 | Boxes on Shelf | ||||||
| 35 | Boxes on Shelf | ||||||
| 34 | Boxes on Shelf | ||||||
| 33 | Shelf | ||||||
| 32 | tabaluga | SW2-2 (ge1/0/1) | SW1-2 (ge0/0/1) | ? | A1: 500W 720478-B21 | B1: 500W 720478-B21 | |
| 31 | |||||||
| 30 | |||||||
| 29 | |||||||
| 28 | |||||||
| 27 | |||||||
| 26 | Cache |
To be deracked | |||||
| 25 | To be deracked | ||||||
| 24 | To be deracked | ||||||
| 23 | Juniper SW1 (front) | Optical to Patch port 1 | A12: 1100W PSU | B12: 350W PSU | |||
| 22 | Juniper SW2 (front) | Optical Pending | A13: 1100W PSU | B13: 350W PSU | |||
| 21 | |||||||
| 20 | |||||||
| 19 | odin | SW2-3 (ge-1/0/2) | SW1-3 (ge-0/0/2) | A10: 700W PWS-706P-1R | B10 700W PWS-706P-1R | ||
| 18 | norbert | SW2-4 (ge-1/0/3) | SW1-4 (ge-0/0/3) | A11: 1200W PWS-1K22A-1R | B11: 1200W PWS-1K22A-1R | Power uses C19/20 to C13/14 cable | |
| 17 | |||||||
| 16 | dulcy | SW1-23 (ge-0/0/22) | SW2-23 (ge-1/0/22) | ? | A17: 1000W PWS-1K02A-1R | B17: 1000W PWS-1K02A-1R | |
| 15 | snap-01 (2U) | SW1-17 (ge-0/0/16) | SW2-17 (ge-1/0/16) | ? | A18: 1600W PWS-1K62A-1R | B18: 1600W PWS-1K62A-1R | |
| 14 | snap-01 (2U) | - | - | - | - | - | |
| 13 | spike-08 | SW1-22 (ge-0/0/21) | SW2-22 (ge-1/0/21) | ? | A19: 500W 720478-B21 | B19: 500W 720478-B21 | |
| 12 | spike-07 | SW1-19 (ge-0/0/18) | SW2-19 (ge-1/0/18) | ? | A14: 500W 720478-B21 | B14: 500W 720478-B21 | |
| 11 | spike-06 | SW1-21 (ge-0/0/20) | SW2-21 (ge-1/0/20) | ? | A15: 500W 720478-B21 | B15: 500W 720478-B21 | |
| 10 | |||||||
| 9 | |||||||
| 8 | |||||||
| 7 | |||||||
| 6 | |||||||
| 5 | faffy | SW1-24 (ge-0/0/23) | SW2-24 (ge-1/0/23) | ? | A21: 800W 720479-B21 | B21: 800W 720479-B21 | 2 free NVMe bays, trays required |
| 4 | karm (2U) | SW1-20 (ge-0/0/19) | SW2-20 (ge-1/0/19) | ? | A22: 1600W PWS-1K62A-1R | B22: 1600W PWS-1K62A-1R | |
| 3 | karm (2U) | - | - | - | - | - | |
| 2 | ironbelly (2U) | SW1-18 (ge-0/0/17) | SW2-18 (ge-1/0/17) | ? | A23: 920W PWS-920P-SQ | B23: 920W PWS-920P-SQ | |
| 1 | ironbelly (2U) | - | - | - | - | - | |
| 0 (floor) | oob1 (RPI4) | SW1-26 (ge-0/0/25) | SW1-27 (ge-0/0/26) FIX | - | A24: 15W SC0216 (via UK plug adapter) | B24: 15W SC0443 (via UK plug strip) | Dual Power Adapter. 4G modem above rack |
- Black power cables for A side, white power cables for B side
- Black ethernet cables for switch 1, white ethernet cables for switch 2
- Blue ethernet cables for OOB
- Yellow fiber for uplink
- Plugs 8 and 16 on both PDUs are higher current C19 sockets with C19/C19 adapter and are not connected. Ethernet 8 and 16 are left unused on the switches to keep numbering consistent.
- Plug 24 on both PDUs use C19/C13 adapters which are connected to UK sockets. PDU-A is a single socket. PDU-B is a 4x UK socket strip.
- The Juniper 1000W PSUs use a IEC C15 connector. They are currently using orange adapters; replacement cables have been ordered.
- The back of the rack is very tight between the PDUs. It is nearly impossible to take stuff out horizontally out the back of the rack.