-
Notifications
You must be signed in to change notification settings - Fork 12
AM6 Rack
Grant Slater edited this page Dec 28, 2022
·
84 revisions
Rack # | Equipment | Network 1 | Network 2 | OOB Network | Power 1 | Power 2 | Notes |
---|---|---|---|---|---|---|---|
47 | Patch panel PP:1625:1131589 | ||||||
46 | Cable organizer | ||||||
45 | |||||||
44 | Boxes on Shelf | ||||||
43 | Boxes on Shelf | ||||||
42 | Boxes on Shelf | ||||||
41 | Boxes on Shelf | ||||||
40 | Boxes on Shelf | ||||||
39 | Boxes on Shelf | ||||||
38 | Boxes on Shelf | ||||||
37 | Boxes on Shelf | ||||||
36 | Boxes on Shelf | ||||||
35 | Boxes on Shelf | ||||||
34 | Boxes on Shelf | ||||||
33 | Shelf | ||||||
32 | tabaluga | ge0/0/1 | ge1/0/1 | ge-1/0/24 | A1: 500W 720478-B21 | B1: 500W 720478-B21 | |
31 | |||||||
30 | |||||||
29 | |||||||
28 | |||||||
27 | |||||||
26 | |||||||
25 | |||||||
24 | |||||||
23 | Juniper SW1 (front) | Optical to Patch port 1 | A12: 350W PSU | B12: 350W PSU | |||
22 | Juniper SW2 (front) | Optical to Patch ready | A13: 350W PSU | B13: 350W PSU | |||
21 | |||||||
20 | |||||||
19 | odin | ge-0/0/2 | ge-1/0/2 | ge-0/0/30 | A10: 700W PWS-706P-1R | B10: 700W PWS-706P-1R | |
18 | norbert | ge-0/0/3 | ge-1/0/3 | ge-1/0/29 | A11: 1200W PWS-1K22A-1R | B11: 1200W PWS-1K22A-1R | Power uses C19/20 to C13/14 cable |
17 | vhagar | ge-0/0/9 | ge-1/0/9 | ge-1/0/33 TBC! | A9: 500W 720478-B21 TBC! | A9: 500W 720478-B21 TBC | |
16 | dulcy | ge-0/0/22 | ge-1/0/22 | ge-1/0/30 | A17: 1000W PWS-1K02A-1R | B17: 1000W PWS-1K02A-1R | |
15 | snap-01 (2U) | ge-0/0/16 | ge-1/0/16 | ge-0/0/28 | A18: 1600W PWS-1K62A-1R | B18: 1600W PWS-1K62A-1R | |
14 | snap-01 (2U) | - | - | - | - | - | |
13 | spike-08 | ge-0/0/21 | ge-1/0/21 | ge-0/0/27 | A19: 500W 720478-B21 | B19: 500W 720478-B21 | |
12 | spike-07 | ge-0/0/18 | ge-1/0/18 | ge-1/0/27 | A14: 500W 720478-B21 | B14: 500W 720478-B21 | |
11 | spike-06 | ge-0/0/20 | ge-1/0/20 | ge-0/0/31 | A15: 500W 720478-B21 | B15: 500W 720478-B21 | |
10 | |||||||
9 | |||||||
8 | |||||||
7 | |||||||
6 | dribble | ge-0/0/15 | ge-1/0/15 | ge-0/0/34 TBC! | A20: 500W 720478-B21 TBC! | B20: 500W 720478-B21 TBC | |
5 | faffy | ge-0/0/23 | ge-1/0/23 | ge-0/0/29 | A21: 800W 720479-B21 | B21: 800W 720479-B21 | 2 free NVMe bays, trays required |
4 | karm (2U) | ge-0/0/19 | ge-1/0/19 | ge-1/0/25 | A22: 1600W PWS-1K62A-1R | B22: 1600W PWS-1K62A-1R | |
3 | karm (2U) | - | - | - | - | - | |
2 | ironbelly (2U) | ge-0/0/17 | ge-1/0/17 | ge-1/0/26 | A23: 920W PWS-920P-SQ | B23: 920W PWS-920P-SQ | |
1 | ironbelly (2U) | - | - | - | - | - | |
0 (floor) | oob1 (RPI4) | ge-0/0/25 | ge-1/0/34 | - | A24: 15W SC0216 (via UK plug adapter) | B24: 15W SC0443 (via UK plug strip) | Dual Power Adapter. 4G modem above rack |
left PDU | PDU-A / PDU1 | - | - | ge-0/0/35 | - | - | |
right PDU | PDU-B / PDU2 | - | - | ge-1/0/32 | - | - |
- Black power cables for A side, white power cables for B side
- Black ethernet cables for switch 1 (top), blue ethernet cables for switch 2 (bottom)
- Beige ethernet cables for OOB
- Blue fiber for uplink
- Plugs 8 and 16 on both PDUs are higher current C19 sockets with C19/C19 adapter and are not connected. Ethernet 8 and 16 are left unused on the switches to keep numbering consistent.
- Plug 24 on both PDUs use C19/C13 adapters which are connected to UK sockets. PDU-A is a single socket. PDU-B is a 4x UK socket strip.
- The back of the rack is very tight between the PDUs. It is nearly impossible to take stuff out horizontally out the back of the rack.