[epsonprojector] Add retrieval of source list (#18006)

* Add retrieval of source list

Signed-off-by: Michael Lobstein <[email protected]>

bundles/org.openhab.binding.epsonprojector/README.md

@@ -25,7 +25,8 @@ The `projector-serial` thing has the following configuration parameters:
 |-----------------|------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------|----------|
 | serialPort      | Serial Port      | Serial port device name that is connected to the Epson projector to control, e.g. COM1 on Windows, /dev/ttyS0 on Linux or /dev/tty.PL2303-0000103D on Mac. | yes      |
 | pollingInterval | Polling Interval | Polling interval in seconds to update channel states, range 5-60 seconds; default 10 seconds.                                                              | no       |
-| maxVolume       | Max Volume Range | Set to the maximum volume level available in the projector's OSD to select the correct range for the volume control. e.g. 20 or 40; default 20             | no       |
+| loadSourceList  | Load Source List | Attempt to load source list options from the projector when True; default True.                                                                            | no       |
+| maxVolume       | Volume Range     | Set to the maximum volume level available in the projector's OSD to select the correct range for the volume control. e.g. 20 or 40; default 20             | no       |
 
 The `projector-tcp` thing has the following configuration parameters:
 
@@ -34,12 +35,15 @@ The `projector-tcp` thing has the following configuration parameters:
 | host            | Host Name        | Host Name or IP address for the projector or serial over IP device.                                                                            | yes      |
 | port            | Port             | Port for the projector or serial over IP device; default 3629 for projectors with built-in Ethernet connector or Wi-Fi.                        | yes      |
 | pollingInterval | Polling Interval | Polling interval in seconds to update channel states, range 5-60 seconds; default 10 seconds.                                                  | no       |
-| maxVolume       | Max Volume Range | Set to the maximum volume level available in the projector's OSD to select the correct range for the volume control. e.g. 20 or 40; default 20 | no       |
+| loadSourceList  | Load Source List | Attempt to load source list options from the projector when True; default True.                                                                | no       |
+| maxVolume       | Volume Range     | Set to the maximum volume level available in the projector's OSD to select the correct range for the volume control. e.g. 20 or 40; default 20 | no       |
 
 Some notes:
 
 - The binding should work on all Epson projectors that support the ESC/VP21 protocol, however not all binding channels will be useable on all projectors.
 - The _source_ channel includes a dropdown with the most common source inputs.
+- When the `loadSourceList` configuration option is set to true, the binding attempts to retrieve the available sources list from the projector and loads them into the _source_ channel.
+- The command to retrieve the sources list is not supported by older projectors and in this case the pre-defined sources list is used instead.
 - If your projector has a source input that is not in the dropdown, the two character hex code to access that input will be displayed by the _source_ channel when that input is selected by the remote control.
 - By using the sitemap mapping or a rule to send the input's code back to the _source_ channel, any source on the projector can be accessed by the binding.
 - The following channels _aspectratio_, _colormode_, _luminance_, _gamma_ and _background_ are pre-populated with a full set of options but not every option will be useable on all projectors.
@@ -159,7 +163,8 @@ sitemap epson label="Epson Projector"
 {
     Frame label="Controls" {
         Switch     item=epsonPower   label="Power"
-        Selection  item=epsonSource  label="Source" mappings=["30"="HDMI1", "A0"="HDMI2", "14"="Component", "20"="PC DSUB", "41"="Video", "42"="S-Video"]
+        // Uncomment mappings below to override the Source state options
+        Selection  item=epsonSource  label="Source" // mappings=["30"="HDMI1", "A0"="HDMI2", "14"="Component", "20"="PC DSUB", "41"="Video", "42"="S-Video", "52"="USB", "53"="LAN", "56"="WiFi Direct"]
         Switch     item=epsonFreeze  label="Freeze"
         Switch     item=epsonMute    label="AV Mute"
         // Volume can be a Setpoint also

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/EpsonProjectorBindingConstants.java

@@ -41,6 +41,7 @@ public class EpsonProjectorBindingConstants {
     public static final String CHANNEL_TYPE_POWER = "power";
     public static final String CHANNEL_TYPE_POWERSTATE = "powerstate";
     public static final String CHANNEL_TYPE_LAMPTIME = "lamptime";
+    public static final String CHANNEL_TYPE_SOURCE = "source";
 
     // Config properties
     public static final String THING_PROPERTY_HOST = "host";

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/EpsonProjectorDevice.java

@@ -13,9 +13,13 @@
 package org.openhab.binding.epsonprojector.internal;
 
 import java.time.Duration;
+import java.util.ArrayList;
+import java.util.Arrays;
+import java.util.List;
 import java.util.concurrent.ScheduledExecutorService;
 import java.util.concurrent.ScheduledFuture;
 import java.util.concurrent.TimeUnit;
+import java.util.stream.IntStream;
 
 import org.eclipse.jdt.annotation.NonNullByDefault;
 import org.eclipse.jdt.annotation.Nullable;
@@ -33,6 +37,7 @@
 import org.openhab.binding.epsonprojector.internal.enums.Switch;
 import org.openhab.core.cache.ExpiringCache;
 import org.openhab.core.io.transport.serial.SerialPortManager;
+import org.openhab.core.types.StateOption;
 import org.slf4j.Logger;
 import org.slf4j.LoggerFactory;
 
@@ -652,4 +657,28 @@ public String getErrorString() throws EpsonProjectorCommandException, EpsonProje
         int err = queryHexInt("ERR?");
         return ErrorMessage.forCode(err);
     }
+
+    /*
+     * Source List
+     */
+    public List<StateOption> getSourceList() throws EpsonProjectorException {
+        final List<StateOption> sourceListOptions = new ArrayList<>();
+
+        try {
+            // example: 30 HDMI1 A0 HDMI2
+            final String[] sources = queryString("SOURCELIST?").split(" ");
+
+            if (sources.length % 2 != 0) {
+                logger.debug("getSourceList(): {} has odd number of elements!", Arrays.toString(sources));
+            } else if (sources[0].length() != 2) {
+                logger.debug("getSourceList(): {} has invalid first entry", Arrays.toString(sources));
+            } else {
+                IntStream.range(0, sources.length / 2)
+                        .forEach(i -> sourceListOptions.add(new StateOption(sources[i * 2], sources[i * 2 + 1])));
+            }
+        } catch (EpsonProjectorCommandException e) {
+            logger.debug("getSourceList(): {}", e.getMessage());
+        }
+        return sourceListOptions;
+    }
 }

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/EpsonProjectorHandlerFactory.java

@@ -38,23 +38,26 @@
 @Component(configurationPid = "binding.epsonprojector", service = ThingHandlerFactory.class)
 public class EpsonProjectorHandlerFactory extends BaseThingHandlerFactory {
     private final SerialPortManager serialPortManager;
+    private final EpsonStateDescriptionOptionProvider stateDescriptionProvider;
 
     @Override
     public boolean supportsThingType(ThingTypeUID thingTypeUID) {
         return SUPPORTED_THING_TYPES_UIDS.contains(thingTypeUID);
     }
 
     @Activate
-    public EpsonProjectorHandlerFactory(final @Reference SerialPortManager serialPortManager) {
+    public EpsonProjectorHandlerFactory(final @Reference SerialPortManager serialPortManager,
+            final @Reference EpsonStateDescriptionOptionProvider provider) {
         this.serialPortManager = serialPortManager;
+        this.stateDescriptionProvider = provider;
     }
 
     @Override
     protected @Nullable ThingHandler createHandler(Thing thing) {
         ThingTypeUID thingTypeUID = thing.getThingTypeUID();
 
         if (THING_TYPE_PROJECTOR_SERIAL.equals(thingTypeUID) || THING_TYPE_PROJECTOR_TCP.equals(thingTypeUID)) {
-            return new EpsonProjectorHandler(thing, serialPortManager);
+            return new EpsonProjectorHandler(thing, serialPortManager, stateDescriptionProvider);
         }
 
         return null;

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/EpsonStateDescriptionOptionProvider.java

@@ -0,0 +1,42 @@
+/**
+ * Copyright (c) 2010-2024 Contributors to the openHAB project
+ *
+ * See the NOTICE file(s) distributed with this work for additional
+ * information.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * http://www.eclipse.org/legal/epl-2.0
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ */
+package org.openhab.binding.epsonprojector.internal;
+
+import org.eclipse.jdt.annotation.NonNullByDefault;
+import org.openhab.core.events.EventPublisher;
+import org.openhab.core.thing.binding.BaseDynamicStateDescriptionProvider;
+import org.openhab.core.thing.i18n.ChannelTypeI18nLocalizationService;
+import org.openhab.core.thing.link.ItemChannelLinkRegistry;
+import org.openhab.core.thing.type.DynamicStateDescriptionProvider;
+import org.osgi.service.component.annotations.Activate;
+import org.osgi.service.component.annotations.Component;
+import org.osgi.service.component.annotations.Reference;
+
+/**
+ * Dynamic provider of state options while leaving other state description fields as original.
+ *
+ * @author Michael Lobstein - Initial contribution
+ */
+@Component(service = { DynamicStateDescriptionProvider.class, EpsonStateDescriptionOptionProvider.class })
+@NonNullByDefault
+public class EpsonStateDescriptionOptionProvider extends BaseDynamicStateDescriptionProvider {
+
+    @Activate
+    public EpsonStateDescriptionOptionProvider(final @Reference EventPublisher eventPublisher,
+            final @Reference ItemChannelLinkRegistry itemChannelLinkRegistry,
+            final @Reference ChannelTypeI18nLocalizationService channelTypeI18nLocalizationService) {
+        this.eventPublisher = eventPublisher;
+        this.itemChannelLinkRegistry = itemChannelLinkRegistry;
+        this.channelTypeI18nLocalizationService = channelTypeI18nLocalizationService;
+    }
+}

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/configuration/EpsonProjectorConfiguration.java

@@ -46,4 +46,9 @@ public class EpsonProjectorConfiguration {
      * Maximum volume setting of this projector, ie 20, 40, etc.
      */
     public int maxVolume = 20;
+
+    /**
+     * Boolean to indicate if source list should be retrieved from projector
+     */
+    public boolean loadSourceList;
 }

bundles/org.openhab.binding.epsonprojector/src/main/java/org/openhab/binding/epsonprojector/internal/handler/EpsonProjectorHandler.java

@@ -26,6 +26,7 @@
 import org.openhab.binding.epsonprojector.internal.EpsonProjectorCommandType;
 import org.openhab.binding.epsonprojector.internal.EpsonProjectorDevice;
 import org.openhab.binding.epsonprojector.internal.EpsonProjectorException;
+import org.openhab.binding.epsonprojector.internal.EpsonStateDescriptionOptionProvider;
 import org.openhab.binding.epsonprojector.internal.configuration.EpsonProjectorConfiguration;
 import org.openhab.binding.epsonprojector.internal.enums.AspectRatio;
 import org.openhab.binding.epsonprojector.internal.enums.Background;
@@ -49,6 +50,7 @@
 import org.openhab.core.types.Command;
 import org.openhab.core.types.RefreshType;
 import org.openhab.core.types.State;
+import org.openhab.core.types.StateOption;
 import org.openhab.core.types.UnDefType;
 import org.slf4j.Logger;
 import org.slf4j.LoggerFactory;
@@ -66,18 +68,23 @@ public class EpsonProjectorHandler extends BaseThingHandler {
 
     private final Logger logger = LoggerFactory.getLogger(EpsonProjectorHandler.class);
     private final SerialPortManager serialPortManager;
+    private final EpsonStateDescriptionOptionProvider stateDescriptionProvider;
 
     private @Nullable ScheduledFuture<?> pollingJob;
     private Optional<EpsonProjectorDevice> device = Optional.empty();
 
+    private boolean loadSourceList = false;
+    private boolean isSourceListLoaded = false;
     private boolean isPowerOn = false;
     private int maxVolume = 20;
     private int curVolumeStep = -1;
     private int pollingInterval = DEFAULT_POLLING_INTERVAL_SEC;
 
-    public EpsonProjectorHandler(Thing thing, SerialPortManager serialPortManager) {
+    public EpsonProjectorHandler(Thing thing, SerialPortManager serialPortManager,
+            EpsonStateDescriptionOptionProvider stateDescriptionProvider) {
         super(thing);
         this.serialPortManager = serialPortManager;
+        this.stateDescriptionProvider = stateDescriptionProvider;
     }
 
     @Override
@@ -107,6 +114,7 @@ public void initialize() {
             updateStatus(ThingStatus.OFFLINE, ThingStatusDetail.CONFIGURATION_ERROR);
         }
 
+        loadSourceList = config.loadSourceList;
         maxVolume = config.maxVolume;
         pollingInterval = config.pollingInterval;
         device.ifPresent(dev -> dev.setScheduler(scheduler));
@@ -188,6 +196,18 @@ private State queryDataFromDevice(EpsonProjectorCommandType commandType) {
                 return null;
             }
 
+            // When polling for PWR status, also try to get SOURCELIST when enabled until successful
+            if (EpsonProjectorCommandType.POWER == commandType && loadSourceList && !isSourceListLoaded) {
+                final List<StateOption> sourceListOptions = remoteController.getSourceList();
+
+                // If a SOURCELIST was retrieved, load it in the source channel state options
+                if (!sourceListOptions.isEmpty()) {
+                    stateDescriptionProvider.setStateOptions(new ChannelUID(getThing().getUID(), CHANNEL_TYPE_SOURCE),
+                            sourceListOptions);
+                    isSourceListLoaded = true;
+                }
+            }
+
             switch (commandType) {
                 case AKEYSTONE:
                     Switch autoKeystone = remoteController.getAutoKeystone();

bundles/org.openhab.binding.epsonprojector/src/main/resources/OH-INF/i18n/epsonprojector.properties

@@ -13,6 +13,8 @@ thing-type.epsonprojector.projector-tcp.description = An Epson projector which s
 
 # thing types config
 
+thing-type.config.epsonprojector.projector-serial.loadSourceList.label = Load Source List
+thing-type.config.epsonprojector.projector-serial.loadSourceList.description = Attempt to load source list options from the Projector when True
 thing-type.config.epsonprojector.projector-serial.maxVolume.label = Volume Range
 thing-type.config.epsonprojector.projector-serial.maxVolume.description = Set to Match the Volume Range Seen in the Projector's OSD
 thing-type.config.epsonprojector.projector-serial.maxVolume.option.20 = Volume range is 0-20
@@ -23,6 +25,8 @@ thing-type.config.epsonprojector.projector-serial.serialPort.label = Serial Port
 thing-type.config.epsonprojector.projector-serial.serialPort.description = Serial Port to Use for Connecting to the Epson Projector
 thing-type.config.epsonprojector.projector-tcp.host.label = Host
 thing-type.config.epsonprojector.projector-tcp.host.description = IP address for the projector or serial over IP device
+thing-type.config.epsonprojector.projector-tcp.loadSourceList.label = Load Source List
+thing-type.config.epsonprojector.projector-tcp.loadSourceList.description = Attempt to load source list options from the Projector when True
 thing-type.config.epsonprojector.projector-tcp.maxVolume.label = Volume Range
 thing-type.config.epsonprojector.projector-tcp.maxVolume.description = Set to Match the Volume Range Seen in the Projector's OSD
 thing-type.config.epsonprojector.projector-tcp.maxVolume.option.20 = Volume range is 0-20
@@ -134,6 +138,9 @@ channel-type.epsonprojector.source.state.option.14 = Component
 channel-type.epsonprojector.source.state.option.20 = PC DSUB
 channel-type.epsonprojector.source.state.option.41 = Video
 channel-type.epsonprojector.source.state.option.42 = S-Video
+channel-type.epsonprojector.source.state.option.52 = USB
+channel-type.epsonprojector.source.state.option.53 = LAN
+channel-type.epsonprojector.source.state.option.56 = WiFi Direct
 channel-type.epsonprojector.tint.label = Tint
 channel-type.epsonprojector.tint.description = Retrieve or Set the Tint
 channel-type.epsonprojector.verticalkeystone.label = Vertical Keystone

bundles/org.openhab.binding.epsonprojector/src/main/resources/OH-INF/thing/thing-types.xml

@@ -51,6 +51,11 @@
 				<description>Configures How Often to Poll the Projector for Updates (5-60; Default 10)</description>
 				<default>10</default>
 			</parameter>
+			<parameter name="loadSourceList" type="boolean">
+				<label>Load Source List</label>
+				<description>Attempt to load source list options from the Projector when True</description>
+				<default>true</default>
+			</parameter>
 			<parameter name="maxVolume" type="integer">
 				<label>Volume Range</label>
 				<description>Set to Match the Volume Range Seen in the Projector's OSD</description>
@@ -119,6 +124,11 @@
 				<description>Configures How Often to Poll the Projector for Updates (5-60; Default 10)</description>
 				<default>10</default>
 			</parameter>
+			<parameter name="loadSourceList" type="boolean">
+				<label>Load Source List</label>
+				<description>Attempt to load source list options from the Projector when True</description>
+				<default>true</default>
+			</parameter>
 			<parameter name="maxVolume" type="integer">
 				<label>Volume Range</label>
 				<description>Set to Match the Volume Range Seen in the Projector's OSD</description>
@@ -219,6 +229,9 @@
 				<option value="20">PC DSUB</option>
 				<option value="41">Video</option>
 				<option value="42">S-Video</option>
+				<option value="52">USB</option>
+				<option value="53">LAN</option>
+				<option value="56">WiFi Direct</option>
 			</options>
 		</state>
 	</channel-type>