Skip to content

Get Windows CI to work again #385

Get Windows CI to work again

Get Windows CI to work again #385

Workflow file for this run

name: Windows tests
on: [pull_request, push]
permissions:
contents: read
jobs:
cygwin:
# Run a job for each of the specified target architectures:
strategy:
matrix:
os:
- windows-2019
# - windows-2022
platform:
- arch: win64
oqsconfig: -DOQS_ALGS_ENABLED=STD
# - arch: win32
# config: --strict-warnings no-fips enable-quic
runs-on: ${{matrix.os}}
env:
CYGWIN_NOWINPATH: 1
SHELLOPTS: igncr
# Don't overwhelm github CI VMs:
MAKE_PARAMS: -j 4
steps:
- name: Checkout provider
uses: actions/checkout@v3
- name: Checkout openssl
uses: actions/checkout@v3
with:
set-safe-directory: true
repository: openssl/openssl
path: openssl
- name: checkout liboqs
uses: actions/checkout@v3
with:
set-safe-directory: true
repository: open-quantum-safe/liboqs
ref: main
path: liboqs
- name: Install cygwin
uses: cygwin/cygwin-install-action@master
with:
packages: perl git ninja gcc-core cmake make
- name: Retrieve OpenSSL32 from cache
id: cache-openssl32
uses: actions/cache@v3
with:
path: c:\cygwin\opt\openssl32
key: ${{ runner.os }}-cygwinopenssl32
- name: Set installpath
run: |
echo "IP=$(cygpath -u $PWD)/.local" >> "$env:GITHUB_ENV"
- name: build liboqs
run: |
which cmake
cmake --version
gcc --version
mkdir _build
cd _build
cmake -GNinja -DOPENSSL_ROOT_DIR=/opt/openssl32 -DCMAKE_INSTALL_PREFIX="${{ env.IP }}" ${{ matrix.platform.oqsconfig }} -DCMAKE_C_COMPILER=gcc ..
ninja
ninja install
working-directory: liboqs
- name: Build openssl3 if not cached
if: steps.cache-openssl32.outputs.cache-hit != 'true'
run: bash -c "./config --prefix=/opt/openssl32 ${{ matrix.platform.config }} && perl configdata.pm --dump && make $MAKE_PARAMS && make install_sw"
working-directory: openssl
- name: Check OpenSSL install3
run: dir c:\cygwin\opt\openssl32
- name: Save OpenSSL
id: cache-openssl-save
if: steps.cache-openssl32.outputs.cache-hit != 'true'
uses: actions/cache/save@v3
with:
path: |
c:\cygwin\opt\openssl32
key: ${{ runner.os }}-cygwinopenssl32
- name: build oqs-provider
run: bash -c "git config --global --add safe.directory $(cygpath -u $PWD) && liboqs_DIR='${{ env.IP }}' cmake -GNinja -DCMAKE_C_COMPILER=gcc -DOPENSSL_ROOT_DIR=/opt/openssl32 -S . -B _build && cd _build && ninja && cd .."
- name: Check Openssl providers
run: bash -c "OPENSSL_MODULES=_build/lib /opt/openssl32/bin/openssl list -providers -provider oqsprovider -provider default"
- name: Run tests
run: bash -c "echo $PATH && PATH=/opt/openssl32/bin:/usr/bin ctest -V"
working-directory: _build
- name: Retain oqsprovider.dll
uses: actions/upload-artifact@v3
with:
name: oqs-provider-cygwin
path: D:/a/oqs-provider/oqs-provider/_build/bin/oqsprovider.dll
msvc:
# Run a job for each of the specified target architectures:
strategy:
matrix:
os:
- windows-2019
# - windows-2022
platform:
- arch: win64
oqsconfig: -DOQS_ALGS_ENABLED=STD
osslconfig: no-shared no-fips VC-WIN64A
# - arch: win32
# oqsconfig: -DOQS_ALGS_ENABLED=STD
# osslconfig: --strict-warnings no-fips enable-quic
runs-on: ${{matrix.os}}
steps:
- name: Restore OpenSSL32 cache
id: cache-openssl32
uses: actions/cache@v3
with:
path: c:\openssl32
key: ${{ runner.os }}-msvcopenssl32
- uses: actions/checkout@v3
- name: Checkout OpenSSL master
if: steps.cache-openssl32.outputs.cache-hit != 'true'
uses: actions/checkout@v3
with:
set-safe-directory: true
repository: openssl/openssl
path: openssl
- uses: actions/checkout@v3
with:
set-safe-directory: true
repository: open-quantum-safe/liboqs
path: liboqs
- uses: ilammy/msvc-dev-cmd@v1
with:
arch: ${{ matrix.platform.arch }}
- name: Setup nasm for OpenSSL build
uses: ilammy/setup-nasm@v1
if: steps.cache-openssl32.outputs.cache-hit != 'true'
with:
platform: ${{ matrix.platform.arch }}
- name: Setup perl for OpenSSl build
uses: shogo82148/actions-setup-perl@v1
if: steps.cache-openssl32.outputs.cache-hit != 'true'
# OQS_USE_OPENSSL=OFF by default on Win32
# if cmake --build fails, try explicit
# cd _build && msbuild ALL_BUILD.vcxproj -p:Configuration=Release
# fails: cmake -DCMAKE_C_FLAGS="/wd5105" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX="c:\liboqs" ${{ matrix.platform.oqsconfig }} -S . -B _build
# cd _build && msbuild ALL_BUILD.vcxproj -p:Configuration=Release && cd ..
# cmake --install _build
- name: build liboqs
run: |
cmake --version
mkdir build
cd build
cmake -GNinja -DCMAKE_C_FLAGS="/wd5105" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX="c:\liboqs" ${{ matrix.platform.oqsconfig }} -DOQS_DIST_BUILD=ON ..
ninja
ninja install
working-directory: liboqs
- name: prepare the OpenSSL build directory
if: steps.cache-openssl32.outputs.cache-hit != 'true'
run: mkdir _build
working-directory: openssl
- name: OpenSSL config
if: steps.cache-openssl32.outputs.cache-hit != 'true'
working-directory: openssl\_build
run: |
perl ..\Configure --banner=Configured --prefix=c:\openssl32 no-makedepend ${{ matrix.platform.osslconfig }}
perl configdata.pm --dump
- name: OpenSSL build
if: steps.cache-openssl32.outputs.cache-hit != 'true'
working-directory: openssl\_build
run: nmake /S
# Skip testing openssl for now
# - name: test
# working-directory: openssl\_build
# run: nmake test VERBOSE_FAILURE=yes TESTS=-test_fuzz* HARNESS_JOBS=4
- name: OpenSSL install
# Run on 64 bit only as 32 bit is slow enough already
if: steps.cache-openssl32.outputs.cache-hit != 'true'
run: |
mkdir c:\openssl32
nmake install_sw
working-directory: openssl\_build
- name: Save OpenSSL
id: cache-openssl-save
if: steps.cache-openssl32.outputs.cache-hit != 'true'
uses: actions/cache/save@v3
with:
path: |
c:\openssl32
key: ${{ runner.os }}-msvcopenssl32
- name: build oqs-provider
run: |
cmake -GNinja -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_FLAGS="/wd5105" -DOPENSSL_ROOT_DIR="c:\openssl32" -Dliboqs_DIR="c:\liboqs\lib\cmake\liboqs" -S . -B _build
cd _build
ninja
- name: Run tests
run: |
ctest -V --test-dir _build
- name: Retain oqsprovider.dll
uses: actions/upload-artifact@v3
with:
name: oqs-provider-msvc
path: D:/a/oqs-provider/oqs-provider/_build/lib/oqsprovider.dll
msvc_native:
# Run a job for each of the specified target architectures:
strategy:
matrix:
os:
# - windows-2019
- windows-2022
platform:
- arch: win64
oqsconfig: -DOQS_ALGS_ENABLED=STD
osslconfig: no-shared no-fips VC-WIN64A
toolchain:
- .CMake/toolchain_windows_amd64.cmake
msarch:
- x64
type:
- Debug
- Release
runs-on: ${{matrix.os}}
steps:
- name: Restore native OpenSSL32 cache
id: cache-openssl32n
uses: actions/cache@v3
with:
path: c:\openssl32n
key: ${{ runner.os }}-msvcopenssl32n
- uses: actions/checkout@v3
- name: Checkout OpenSSL master
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
uses: actions/checkout@v3
with:
set-safe-directory: true
repository: openssl/openssl
path: openssl
- uses: actions/checkout@v3
with:
set-safe-directory: true
repository: open-quantum-safe/liboqs
path: liboqs
- uses: ilammy/msvc-dev-cmd@v1
with:
arch: ${{ matrix.platform.arch }}
- name: Add msbuild to PATH
uses: microsoft/setup-msbuild@v1
with:
msbuild-architecture: ${{matrix.msarch}}
vs-version: '[16.10,]'
- name: Setup nasm for OpenSSL build
uses: ilammy/setup-nasm@v1
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
with:
platform: ${{ matrix.platform.arch }}
- name: Setup perl for OpenSSL build
uses: shogo82148/actions-setup-perl@v1
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
- name: build liboqs
run: |
cmake --version
cmake -B build --toolchain ${{ matrix.toolchain }} .
cmake --build build
cmake --build build --target INSTALL
working-directory: liboqs
- name: prepare the OpenSSL build directory
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
run: mkdir _build
working-directory: openssl
- name: OpenSSL config
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
working-directory: openssl\_build
run: |
perl ..\Configure --banner=Configured --prefix=c:\openssl32n no-makedepend ${{ matrix.platform.osslconfig }}
perl configdata.pm --dump
- name: OpenSSL build
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
working-directory: openssl\_build
run: nmake /S
- name: OpenSSL install
# Run on 64 bit only as 32 bit is slow enough already
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
run: |
mkdir c:\openssl32n
nmake install_sw
working-directory: openssl\_build
- name: Save OpenSSL
id: cache-openssl-save
if: steps.cache-openssl32n.outputs.cache-hit != 'true'
uses: actions/cache/save@v3
with:
path: |
c:\openssl32n
key: ${{ runner.os }}-msvcopenssl32n
- name: build oqs-provider
run: |
cmake -DCMAKE_BUILD_TYPE=${{ matrix.type }} -DCMAKE_C_FLAGS="/wd5105" -DOPENSSL_ROOT_DIR="c:\openssl32n" -Dliboqs_DIR="c:\liboqs\lib\cmake\liboqs" -S . -B _build
cmake --build _build --config=${{ matrix.type }}
- name: Run tests
run: |
ctest --test-dir _build -C ${{ matrix.type }}
- name: Retain oqsprovider.dll
uses: actions/upload-artifact@v3
with:
name: oqs-provider-msvc
path: D:/a/oqs-provider/oqs-provider/_build/lib/oqsprovider.dll