Upmerge 8 24 #20
Merged
Upmerge 8 24 #20
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
If 'use_backup' option is set to True in config.py, the bot collects a backup of the stats, so in case of unexpected termination the bot can continue the test series from the test case where it was interrupted.
hid_gpio is a mynewt based, DIY active hub https://github.com/kasjer/hid_gpio
Since autopts bot is able to continue testing after an interruption, let's add a timeguard to cron that will detect whether a test cases run smoothly.
Make reports generation more generic.
Adding back the test profiles mbtm and dfum to workspace with default IXIT values. Signed-off-by: m-alperen-sener <[email protected]>
- With TCRL-2024-1 profiles MBT and DFU changed to MBTM and DFUM respectively. Updating the test case names and profile names. - TSPX_Reception_Counter and TSPX_Server_Timeout removed and separate TSPX_Client_Timeout_Base and TSPX_Server_Timeout_Base added for client and server. - Adding missing DFUM tests to zephyr iut_config. - Adjust the CONFIG_BT_MESH_BLOB_BLOCK_SIZE_MIN/MAX according to MBTM test cases. - Increase the CONFIG_BT_MESH_SETTINGS_WORKQ_STACK_SIZE to 1200 instead of default 800. Signed-off-by: m-alperen-sener <[email protected]>
It is sufficient to use only prefixes of the test groups for filtering. Signed-off-by: alperen sener <[email protected]>
It happened that the TCP/IP socket of the server got stuck, so lets restart the process at each cron job.
So far GATT service was used to create DIS but we should use one from Zephyr.
New TCRL added more tests for CIS connnection in QoS Configured state.
Add L2CAP test case to mynewt errata list
Add missing module to client and server requirements.txt
This will enable to run specified amount of test cases from among prefixes that are used with magic tag.
The loaded tc stats were not inited with tc database, hence regressions could not be caught if the autopts bot was restarted in the meantime.
Unhandled exception terminated a github cron thread.
Rarely, but it happens that restart of the testing setup fails, e.g. because of some TCP/IP socket. Let's try restart the bot setup again if bot terminated unexpectedly.
Remove stale ones, add newt test case.
If the requested test case prefixes were not found in cached list of test cases, the test_cases list was empty and autopts bot was triggered to run all test cases from PTS workspace.
GMCS was set according to test plan.
GTBS tests are now part of TBS profile.
GMCS testa are now part of MCS profile.
Adding gap_pair in wid_142 fixes various GATT/CL testcases. It may be that PTS used to (before some update) initiate pairing procedure which is why no btp command was used in this handler.
Fixes issue 1227.
A .py file loaded as a module is cached until it is explicitly removed from sys.modules. So subsequent attempts to load the file only return a reference to the existing module-dictionary. So we need to deep-copy a config.py to prevent overwriting its original values and reuse it e.g. in subsequent PR jobs.
This commit implements project name field into report email body.
This enabled few missing features in GAP, GATT and LE Audio profiles.
nRF54H20 SoC device added
Adds the nRF5340 audio devkit board, with capabilities to build both application and network cores with configurable separate builds.
Each call to run_test_cases created a separate session folder. Bot enters this function after each rebuild and flash, so many of these folders were created, making it difficult to find logs of a specific test case.
In backup mode, these files have to be moved/deleted to start fresh bot start. Cron does this automatically, but without the cron, one had to do it manually.
If a test case triggered cron timeout and bot restart at its first attempt, its result was missing in stats.
If the autopts bot was pulling logs from server longer than configured cron timeout, cron restarted the bot in the middle. Because stats were not saved after downloading the test case description from PTS, after restarting the bot, it did not have them available when creating a report.
If someone would like to use a different controller and make the bot to build/flash only appcore of nrf53 board, all they need to do from now is to set this option "board": "nrf53_appcore" in the bot's config.py file.
CAP WIDs are using MICP and VCP commands and thus shall initialize required BTP services.
Currently there is no way to access included service handle in Nimble with find included services procedure. We still can use other values that we have access to, to compare them with values from MMI which should be enough to pass test GATT/CL/GAD/BV-03-C.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.