Releases: markusC64/1541ultimate2
3.0e_452+_v1
Do not use this release on a 1541 Ultimate II without plus
Changes since last release:
- All patches from 3.0c_433+_v5 are merged by Gideon
- Fix issue 240: Soft IEC drive # not changeable (Fix by Gideon)
- This release is based on revision 452
- Fix initialisation of input diaglogs
Changes since revision 452:
- Improved Seamless disk swap
- Pagefox crt support
Initial firmware for 1541 Ultimate II+ (End of 2016) by Gideon
Do not use this firmware on a 1541 Ultimate II (non plus).
Version 3.0e
- Fix issue 240: Soft IEC drive # not changeable (Fix by Gideon)
- Fix initialisation of input diaglogs
- Fix loading retro replay from unpatched CRT
- Improve telnet compatibility
- seamless disk swap by pressing middle button at least 1 sec
- Support for power cycle resident custom cartridges (bin & crt format).
- Fix loading KCS from CRT
- Support for Business Basic CRT files
- Retro Replay CRT files can be used without patching them before
- View Option is before rename option in menu
- second virtual 1541 drive on the 1541 Ultimate II+ enabled
- Updated Retro replay modules to 3.8q resp. 3.8y.
- Simons' Basic can be loaded from CRT
- Comal 80 can be loaded from CRT
- Westermann learning modules can be loaded from CRT
- GeoRAM cartridge support
- Stand alone mode fixed
v2.6k+_v1
The following Changes are available to the stable Firmware 2.6k for the 1541 Ultimate II (not plus):
- Fix 8K and ultimax
- Fix loading retro replay crt
- Business Basic, simons' basic, comal80 and westermann modules support
- GeoRAM support
- Retro Replay updated
Fixes from David Horrocks:
- VIA fixes in line with VIA specification docs.
- Added D64 error support for some sector read errors.
- Updated CPU 6502 from Gideon
- Fixed opcodes ANC 2B/0B (used by a PP Hammer crack)
- fix ADC SBC
Improvement by Rene Garcia:
- KCS Support
3.0c_433+_v5
Changes:
- Fix loading retro replay from unpatched CRT
- Improve telnet compatibility
- seamless disk swap by pressing middle button at least 1 sec
- Support for power cycle resident custom cartridges (bin & crt format).
- Fix loading KCS from CRT
3.0c_433+_v4
New since last release:
- Support for Business Basic CRT files
- Retro Replay CRT files can be used without patching them before
- View Option is before rename option in menu
3.0c_433+_v3 - Dual Drive Version
This version enables a second virtual 1541 drive on the 1541 Ultimate II+.
Update: A firmware update for the 1541 Ultimate II (not plus!) is now also available. Update to 3.0 final first if you're currently using firmware 2.x.
3.0c_433+_v2
The following improvements have been done:
New since release
- Updated Retro replay modules to 3.8q resp. 3.8y.
New compared to upstream:
- Simons' Basic can be loaded from CRT
- Comal 80 can be loaded from CRT
- Westermann learning modules can be loaded from CRT
- GeoRAM cartridge support
3.0c_433+_v1
The following improvements have been done:
- Simons' Basic can be loaded from CRT
- Comal 80 can be loaded from CRT
- Westermann learning modules can be loaded from CRT
- GeoRAM cartridge support
Release by Gideon: 3.0c
Version 3.0c
- IEC fixed for use with JiffyDOS and single byte get functions
- G64 loading fixed
- C64 poweroff while USB powered fixed
- make fat filesystem use rtc to set timestamp on modified/created files
- Ultimax cards now always have VIC serve ON for graphics.
Initial release for 1541 Ultimate II+ by Gideon
This is the initial release of the firmware for the 1541 Ultimate II+.
It is also available for the 1541 Ultimate II.