A python based system for generating closed-form solutions to the manipulator inverse kinematics problem using behavior trees for action selection.
BH is working on a new implementation of the solution graph and generating the list of solutions (much trickier that it seems at first!). I've taken this work to a private repo fork to decluter this page, but will merge and commit shortly. This work is aimed at issues #15 and #18. Thanks to you new issue posters!
Sum-of-Angles transform now works for the case of three angles (corresponds to three parallel axes in the mechanism). IKBT can now solve the UR5 and similar robots!
- We built an autonomous inverse kinematics solver (IKBT) using a behavior tree to organize solution algorithms.
- We incorporated knowledge frequently used (by human experts) when solving inverse kinematics into a behavior tree. These rule-based solvers applicable to any serial-chain, non-redundant, robot arm.
- IKBT generates a dependency {\it graph} of joint variables after solving, generating all possible solutions.
- IKBT provides convenience features such as automatic documentation of the solution in \LaTeX and automatic code generation in Python and C++.
- Implementation in a modern open-source, cross-platform, programming language (Python) with minimal dependencies outside of the standard Python distribution ({\tt sympy}).
- Introductory Video (6min)
- How to set up IKBT for your own robot arm (6.5min)
Zhang, Dianmu, and Blake Hannaford. "IKBT: solving closed-form Inverse Kinematics with Behavior Tree." arXiv preprint arXiv:1711.05412 (2017).
http://arxiv.org/abs/1711.05412
You need the following to be installed to run IKBT:
- Python 2.7.x (Python Installation)
- Sympy python package (Installation instructions for all OS)
- Latex package (for nice equation output - highly recommended) (Install Latex)
A list of all DH parameters tested in the paper: ['Puma', 'Chair_Helper', 'Wrist', 'MiniDD', 'Olson13','Stanford', 'Sims11', 'Srisuan11', 'Axtman13', 'Mackler13', 'Minder13', 'Palm13', 'Parkman13', 'Frei13', 'Wachtveitl', 'Bartell', 'DZhang', 'Khat6DOF'.]
We suggest you first run the Wrist since it is relatively fast:
python ikSolver.py Wrist
To solve your own problem open the file ikbtfunctions/ik_robots.py and create an entry for your robot. You should copy an entry for an existing robot and edit it's entries. Create an "unknown" for each joint variable and package them into the vector "variables". Enter the DH parameters in matrix form. Also, enter the name of your robot into the list of valid names (ikbtfunctions/ik_robots.py, line 31).
DH parameters explained: The vector "vv" encodes whether each joint is rotary (1) or prismatic (0). If your robot is less than 6 DOF, create empty rows: [ 0 , 0, 0, 0 ], in the DH table so that it has six rows. Many standard symbols in robot kinematics are pre-defined for you but if you use any new ones, be sure to define them using sp.var(). See "Wrist" for an example in which the three joint variables "A, B, C" are set up for sympy by sp.var('A B C'). "pvals" is where you can put in the numerical values for all parameters, for result verification purposes.
Pre-computed forward kinematics.
Sometimes computation of the forward kinematic equations (and their subsequent simplification) can be time consuming. When debugging an inverse kinematics solution (for example modifying the BT), it can slow the cycle if these have to be redone each time. Therefore, the software has a mechanism using Python "pickle" files, to cache the forward kinematics computation and not repeat it. Forward kinematics pickle files are stored in the directory fk_eqns/. This directory will be automatically created if you don't have it. In some cases you may have to delete the pickle file for your robot. To do that, >rm fk_eqns/NAME_pickle.p. IKBT will generally tell you when you should do this, but it is OK to just >rm -rf fk_eqns/ .