Automatic merge of 'master' into merge (2024-05-21 13:04)

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -331,7 +331,7 @@ Date:		January 2018
 Contact:	Jaegeuk Kim <[email protected]>
 Description:	This indicates how many GC can be failed for the pinned
 		file. If it exceeds this, F2FS doesn't guarantee its pinning
-		state. 2048 trials is set by default.
+		state. 2048 trials is set by default, and 65535 as maximum.
 
 What:		/sys/fs/f2fs/<disk>/extension_list
 Date:		February 2018

Documentation/ABI/testing/sysfs-kernel-mm-damon

@@ -314,9 +314,9 @@ Date:		Dec 2022
 Contact:	SeongJae Park <[email protected]>
 Description:	Writing to and reading from this file sets and gets the type of
 		the memory of the interest.  'anon' for anonymous pages,
-		'memcg' for specific memory cgroup, 'addr' for address range
-		(an open-ended interval), or 'target' for DAMON monitoring
-		target can be written and read.
+		'memcg' for specific memory cgroup, 'young' for young pages,
+		'addr' for address range (an open-ended interval), or 'target'
+		for DAMON monitoring target can be written and read.
 
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/memcg_path
 Date:		Dec 2022

Documentation/ABI/testing/sysfs-kernel-mm-transparent-hugepage

@@ -0,0 +1,18 @@
+What:		/sys/kernel/mm/transparent_hugepage/
+Date:		April 2024
+Contact:	Linux memory management mailing list <[email protected]>
+Description:
+		/sys/kernel/mm/transparent_hugepage/ contains a number of files and
+		subdirectories,
+
+			- defrag
+			- enabled
+			- hpage_pmd_size
+			- khugepaged
+			- shmem_enabled
+			- use_zero_page
+			- subdirectories of the form hugepages-<size>kB, where <size>
+			  is the page size of the hugepages supported by the kernel/CPU
+			  combination.
+
+		See Documentation/admin-guide/mm/transhuge.rst for details.

Documentation/Makefile

@@ -80,22 +80,22 @@ loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
 #    * dest folder relative to $(BUILDDIR) and
 #    * cache folder relative to $(BUILDDIR)/.doctrees
 # $4 dest subfolder e.g. "man" for man pages at userspace-api/media/man
-# $5 reST source folder relative to $(srctree)/$(src),
+# $5 reST source folder relative to $(src),
 #    e.g. "userspace-api/media" for the linux-tv book-set at ./Documentation/userspace-api/media
 
 quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
       cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media $2 && \
 	PYTHONDONTWRITEBYTECODE=1 \
-	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
+	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(src)/$5/$(SPHINX_CONF)) \
 	$(PYTHON3) $(srctree)/scripts/jobserver-exec \
 	$(CONFIG_SHELL) $(srctree)/Documentation/sphinx/parallel-wrapper.sh \
 	$(SPHINXBUILD) \
 	-b $2 \
-	-c $(abspath $(srctree)/$(src)) \
+	-c $(abspath $(src)) \
 	-d $(abspath $(BUILDDIR)/.doctrees/$3) \
 	-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
 	$(ALLSPHINXOPTS) \
-	$(abspath $(srctree)/$(src)/$5) \
+	$(abspath $(src)/$5) \
 	$(abspath $(BUILDDIR)/$3/$4) && \
 	if [ "x$(DOCS_CSS)" != "x" ]; then \
 		cp $(if $(patsubst /%,,$(DOCS_CSS)),$(abspath $(srctree)/$(DOCS_CSS)),$(DOCS_CSS)) $(BUILDDIR)/$3/_static/; \

Documentation/admin-guide/blockdev/zram.rst

@@ -466,6 +466,11 @@ of equal or greater size:::
 	#recompress idle pages larger than 2000 bytes
 	echo "type=idle threshold=2000" > /sys/block/zramX/recompress
 
+It is also possible to limit the number of pages zram re-compression will
+attempt to recompress:::
+
+	echo "type=huge_idle max_pages=42" > /sys/block/zramX/recompress
+
 Recompression of idle pages requires memory tracking.
 
 During re-compression for every page, that matches re-compression criteria,

Documentation/admin-guide/cgroup-v1/cpusets.rst

@@ -568,7 +568,7 @@ on the next tick.  For some applications in special situation, waiting
 
 The 'cpuset.sched_relax_domain_level' file allows you to request changing
 this searching range as you like.  This file takes int value which
-indicates size of searching range in levels ideally as follows,
+indicates size of searching range in levels approximately as follows,
 otherwise initial value -1 that indicates the cpuset has no request.
 
 ====== ===========================================================
@@ -581,6 +581,11 @@ otherwise initial value -1 that indicates the cpuset has no request.
    5   search system wide [on NUMA system]
 ====== ===========================================================
 
+Not all levels can be present and values can change depending on the
+system architecture and kernel configuration. Check
+/sys/kernel/debug/sched/domains/cpu*/domain*/ for system-specific
+details.
+
 The system default is architecture dependent.  The system default
 can be changed using the relax_domain_level= boot parameter.
 

Documentation/admin-guide/cgroup-v1/memory.rst

@@ -300,14 +300,14 @@ When oom event notifier is registered, event will be delivered.
 
 Lock order is as follows::
 
-  Page lock (PG_locked bit of page->flags)
+  folio_lock
     mm->page_table_lock or split pte_lock
       folio_memcg_lock (memcg->move_lock)
         mapping->i_pages lock
           lruvec->lru_lock.
 
 Per-node-per-memcgroup LRU (cgroup's private LRU) is guarded by
-lruvec->lru_lock; PG_lru bit of page->flags is cleared before
+lruvec->lru_lock; the folio LRU flag is cleared before
 isolating a page from its LRU under lruvec->lru_lock.
 
 .. _cgroup-v1-memory-kernel-extension:
@@ -802,8 +802,8 @@ a page or a swap can be moved only when it is charged to the task's current
 |   | anonymous pages, file pages (and swaps) in the range mmapped by the task |
 |   | will be moved even if the task hasn't done page fault, i.e. they might   |
 |   | not be the task's "RSS", but other task's "RSS" that maps the same file. |
-|   | And mapcount of the page is ignored (the page can be moved even if       |
-|   | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to    |
+|   | The mapcount of the page is ignored (the page can be moved independent   |
+|   | of the mapcount). You must enable Swap Extension (see 2.4) to            |
 |   | enable move of swap charges.                                             |
 +---+--------------------------------------------------------------------------+
 

Documentation/admin-guide/cgroup-v2.rst

@@ -1435,7 +1435,7 @@ PAGE_SIZE multiple when read back.
 	  sec_pagetables
 		Amount of memory allocated for secondary page tables,
 		this currently includes KVM mmu allocations on x86
-		and arm64.
+		and arm64 and IOMMU page tables.
 
 	  percpu (npn)
 		Amount of memory used for storing per-cpu kernel

Documentation/admin-guide/kdump/kdump.rst

@@ -136,10 +136,6 @@ System kernel config options
 
 	CONFIG_KEXEC_CORE=y
 
-   Subsequently, CRASH_CORE is selected by KEXEC_CORE::
-
-	CONFIG_CRASH_CORE=y
-
 2) Enable "sysfs file system support" in "Filesystem" -> "Pseudo
    filesystems." This is usually enabled by default::
 
@@ -168,6 +164,10 @@ Dump-capture kernel config options (Arch Independent)
 
 	CONFIG_CRASH_DUMP=y
 
+   And this will select VMCORE_INFO and CRASH_RESERVE::
+	CONFIG_VMCORE_INFO=y
+	CONFIG_CRASH_RESERVE=y
+
 2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems"::
 
 	CONFIG_PROC_VMCORE=y

Documentation/admin-guide/kernel-parameters.txt

@@ -2151,6 +2151,12 @@
 			Format: 0 | 1
 			Default set by CONFIG_INIT_ON_FREE_DEFAULT_ON.
 
+	init_mlocked_on_free=	[MM] Fill freed userspace memory with zeroes if
+				it was mlock'ed and not explicitly munlock'ed
+				afterwards.
+				Format: 0 | 1
+				Default set by CONFIG_INIT_MLOCKED_ON_FREE_DEFAULT_ON
+
 	init_pkru=	[X86] Specify the default memory protection keys rights
 			register contents for all processes.  0x55555554 by
 			default (disallow access to all but pkey 0).  Can
@@ -3781,10 +3787,12 @@
 			Format: [state][,regs][,debounce][,die]
 
 	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
-			Format: [panic,][nopanic,][num]
+			Format: [panic,][nopanic,][rNNN,][num]
 			Valid num: 0 or 1
 			0 - turn hardlockup detector in nmi_watchdog off
 			1 - turn hardlockup detector in nmi_watchdog on
+			rNNN - configure the watchdog with raw perf event 0xNNN
+
 			When panic is specified, panic when an NMI watchdog
 			timeout occurs (or 'nopanic' to not panic on an NMI
 			watchdog, if CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is set)
@@ -7501,4 +7509,3 @@
 				memory, and other data can't be written using
 				xmon commands.
 			off	xmon is disabled.
-

Documentation/admin-guide/mm/damon/usage.rst

@@ -153,7 +153,7 @@ Users can write below commands for the kdamond to the ``state`` file.
 - ``clear_schemes_tried_regions``: Clear the DAMON-based operating scheme
   action tried regions directory for each DAMON-based operation scheme of the
   kdamond.
-- ``update_schemes_effective_bytes``: Update the contents of
+- ``update_schemes_effective_quotas``: Update the contents of
   ``effective_bytes`` files for each DAMON-based operation scheme of the
   kdamond.  For more details, refer to :ref:`quotas directory <sysfs_quotas>`.
 
@@ -342,7 +342,7 @@ Based on the user-specified :ref:`goal <sysfs_schemes_quota_goals>`, the
 effective size quota is further adjusted.  Reading ``effective_bytes`` returns
 the current effective size quota.  The file is not updated in real time, so
 users should ask DAMON sysfs interface to update the content of the file for
-the stats by writing a special keyword, ``update_schemes_effective_bytes`` to
+the stats by writing a special keyword, ``update_schemes_effective_quotas`` to
 the relevant ``kdamonds/<N>/state`` file.
 
 Under ``weights`` directory, three files (``sz_permil``,
@@ -410,19 +410,19 @@ in the numeric order.
 
 Each filter directory contains six files, namely ``type``, ``matcing``,
 ``memcg_path``, ``addr_start``, ``addr_end``, and ``target_idx``.  To ``type``
-file, you can write one of four special keywords: ``anon`` for anonymous pages,
-``memcg`` for specific memory cgroup, ``addr`` for specific address range (an
-open-ended interval), or ``target`` for specific DAMON monitoring target
-filtering.  In case of the memory cgroup filtering, you can specify the memory
-cgroup of the interest by writing the path of the memory cgroup from the
-cgroups mount point to ``memcg_path`` file.  In case of the address range
-filtering, you can specify the start and end address of the range to
-``addr_start`` and ``addr_end`` files, respectively.  For the DAMON monitoring
-target filtering, you can specify the index of the target between the list of
-the DAMON context's monitoring targets list to ``target_idx`` file.  You can
-write ``Y`` or ``N`` to ``matching`` file to filter out pages that does or does
-not match to the type, respectively.  Then, the scheme's action will not be
-applied to the pages that specified to be filtered out.
+file, you can write one of five special keywords: ``anon`` for anonymous pages,
+``memcg`` for specific memory cgroup, ``young`` for young pages, ``addr`` for
+specific address range (an open-ended interval), or ``target`` for specific
+DAMON monitoring target filtering.  In case of the memory cgroup filtering, you
+can specify the memory cgroup of the interest by writing the path of the memory
+cgroup from the cgroups mount point to ``memcg_path`` file.  In case of the
+address range filtering, you can specify the start and end address of the range
+to ``addr_start`` and ``addr_end`` files, respectively.  For the DAMON
+monitoring target filtering, you can specify the index of the target between
+the list of the DAMON context's monitoring targets list to ``target_idx`` file.
+You can write ``Y`` or ``N`` to ``matching`` file to filter out pages that does
+or does not match to the type, respectively.  Then, the scheme's action will
+not be applied to the pages that specified to be filtered out.
 
 For example, below restricts a DAMOS action to be applied to only non-anonymous
 pages of all memory cgroups except ``/having_care_already``.::
@@ -434,7 +434,7 @@ pages of all memory cgroups except ``/having_care_already``.::
     # # further filter out all cgroups except one at '/having_care_already'
     echo memcg > 1/type
     echo /having_care_already > 1/memcg_path
-    echo N > 1/matching
+    echo Y > 1/matching
 
 Note that ``anon`` and ``memcg`` filters are currently supported only when
 ``paddr`` :ref:`implementation <sysfs_context>` is being used.

Documentation/admin-guide/mm/hugetlbpage.rst

@@ -376,6 +376,13 @@ Note that the number of overcommit and reserve pages remain global quantities,
 as we don't know until fault time, when the faulting task's mempolicy is
 applied, from which node the huge page allocation will be attempted.
 
+The hugetlb may be migrated between the per-node hugepages pool in the following
+scenarios: memory offline, memory failure, longterm pinning, syscalls(mbind,
+migrate_pages and move_pages), alloc_contig_range() and alloc_contig_pages().
+Now only memory offline, memory failure and syscalls allow fallbacking to allocate
+a new hugetlb on a different node if the current node is unable to allocate during
+hugetlb migration, that means these 3 cases can break the per-node hugepages pool.
+
 .. _using_huge_pages:
 
 Using Huge Pages

Documentation/admin-guide/mm/transhuge.rst

@@ -278,7 +278,8 @@ collapsed, resulting fewer pages being collapsed into
 THPs, and lower memory access performance.
 
 ``max_ptes_shared`` specifies how many pages can be shared across multiple
-processes. Exceeding the number would block the collapse::
+processes. khugepaged might treat pages of THPs as shared if any page of
+that THP is shared. Exceeding the number would block the collapse::
 
 	/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_shared
 
@@ -369,15 +370,15 @@ monitor how successfully the system is providing huge pages for use.
 
 thp_fault_alloc
 	is incremented every time a huge page is successfully
-	allocated to handle a page fault.
+	allocated and charged to handle a page fault.
 
 thp_collapse_alloc
 	is incremented by khugepaged when it has found
 	a range of pages to collapse into one huge page and has
 	successfully allocated a new huge page to store the data.
 
 thp_fault_fallback
-	is incremented if a page fault fails to allocate
+	is incremented if a page fault fails to allocate or charge
 	a huge page and instead falls back to using small pages.
 
 thp_fault_fallback_charge
@@ -447,6 +448,34 @@ thp_swpout_fallback
 	Usually because failed to allocate some continuous swap space
 	for the huge page.
 
+In /sys/kernel/mm/transparent_hugepage/hugepages-<size>kB/stats, There are
+also individual counters for each huge page size, which can be utilized to
+monitor the system's effectiveness in providing huge pages for usage. Each
+counter has its own corresponding file.
+
+anon_fault_alloc
+	is incremented every time a huge page is successfully
+	allocated and charged to handle a page fault.
+
+anon_fault_fallback
+	is incremented if a page fault fails to allocate or charge
+	a huge page and instead falls back to using huge pages with
+	lower orders or small pages.
+
+anon_fault_fallback_charge
+	is incremented if a page fault fails to charge a huge page and
+	instead falls back to using huge pages with lower orders or
+	small pages even though the allocation was successful.
+
+anon_swpout
+	is incremented every time a huge page is swapped out in one
+	piece without splitting.
+
+anon_swpout_fallback
+	is incremented if a huge page has to be split before swapout.
+	Usually because failed to allocate some continuous swap space
+	for the huge page.
+
 As the system ages, allocating huge pages may be expensive as the
 system uses memory compaction to copy data around memory to free a
 huge page for use. There are some counters in ``/proc/vmstat`` to help

Documentation/admin-guide/mm/zswap.rst

@@ -111,35 +111,6 @@ checked if it is a same-value filled page before compressing it. If true, the
 compressed length of the page is set to zero and the pattern or same-filled
 value is stored.
 
-Same-value filled pages identification feature is enabled by default and can be
-disabled at boot time by setting the ``same_filled_pages_enabled`` attribute
-to 0, e.g. ``zswap.same_filled_pages_enabled=0``. It can also be enabled and
-disabled at runtime using the sysfs ``same_filled_pages_enabled``
-attribute, e.g.::
-
-	echo 1 > /sys/module/zswap/parameters/same_filled_pages_enabled
-
-When zswap same-filled page identification is disabled at runtime, it will stop
-checking for the same-value filled pages during store operation.
-In other words, every page will be then considered non-same-value filled.
-However, the existing pages which are marked as same-value filled pages remain
-stored unchanged in zswap until they are either loaded or invalidated.
-
-In some circumstances it might be advantageous to make use of just the zswap
-ability to efficiently store same-filled pages without enabling the whole
-compressed page storage.
-In this case the handling of non-same-value pages by zswap (enabled by default)
-can be disabled by setting the ``non_same_filled_pages_enabled`` attribute
-to 0, e.g. ``zswap.non_same_filled_pages_enabled=0``.
-It can also be enabled and disabled at runtime using the sysfs
-``non_same_filled_pages_enabled`` attribute, e.g.::
-
-	echo 1 > /sys/module/zswap/parameters/non_same_filled_pages_enabled
-
-Disabling both ``zswap.same_filled_pages_enabled`` and
-``zswap.non_same_filled_pages_enabled`` effectively disables accepting any new
-pages by zswap.
-
 To prevent zswap from shrinking pool when zswap is full and there's a high
 pressure on swap (this will result in flipping pages in and out zswap pool
 without any real benefit but with a performance drop for the system), a

Documentation/admin-guide/sysctl/vm.rst

@@ -43,6 +43,7 @@ Currently, these files are in /proc/sys/vm:
 - legacy_va_layout
 - lowmem_reserve_ratio
 - max_map_count
+- mem_profiling         (only if CONFIG_MEM_ALLOC_PROFILING=y)
 - memory_failure_early_kill
 - memory_failure_recovery
 - min_free_kbytes
@@ -425,6 +426,21 @@ e.g., up to one or two maps per allocation.
 The default value is 65530.
 
 
+mem_profiling
+==============
+
+Enable memory profiling (when CONFIG_MEM_ALLOC_PROFILING=y)
+
+1: Enable memory profiling.
+
+0: Disable memory profiling.
+
+Enabling memory profiling introduces a small performance overhead for all
+memory allocations.
+
+The default value depends on CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT.
+
+
 memory_failure_early_kill:
 ==========================