Automatic merge of 'master' into merge-test (2024-03-14 00:34)

.get_maintainer.ignore

@@ -1,4 +1,5 @@
 Alan Cox <[email protected]>
 Alan Cox <[email protected]>
 Christoph Hellwig <[email protected]>
+Jeff Kirsher <[email protected]>
 Marc Gonzalez <[email protected]>

.mailmap

@@ -573,6 +573,7 @@ Simon Kelley <[email protected]>
 Sricharan Ramabadhran <[email protected]> <[email protected]>
 Srinivas Ramana <[email protected]> <[email protected]>
 Sriram R <[email protected]> <[email protected]>
+Stefan Wahren <[email protected]> <[email protected]>
 Stéphane Witzmann <[email protected]>
 Stephen Hemminger <[email protected]> <[email protected]>
 Stephen Hemminger <[email protected]> <[email protected]>

CREDITS

@@ -63,6 +63,11 @@ D: dosfs, LILO, some fd features, ATM, various other hacks here and there
 S: Buenos Aires
 S: Argentina
 
+NTFS FILESYSTEM
+N: Anton Altaparmakov
+E: [email protected]
+D: NTFS filesystem
+
 N: Tim Alpaerts
 E: [email protected]
 D: 802.2 class II logical link control layer,

Documentation/ABI/testing/sysfs-bus-vdpa

@@ -1,6 +1,6 @@
 What:		/sys/bus/vdpa/drivers_autoprobe
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		This file determines whether new devices are immediately bound
 		to a driver after the creation. It initially contains 1, which
@@ -12,7 +12,7 @@ Description:
 
 What:		/sys/bus/vdpa/driver_probe
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		Writing a device name to this file will cause the kernel binds
 		devices to a compatible driver.
@@ -22,23 +22,23 @@ Description:
 
 What:		/sys/bus/vdpa/drivers/.../bind
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		Writing a device name to this file will cause the driver to
 		attempt to bind to the device. This is useful for overriding
 		default bindings.
 
 What:		/sys/bus/vdpa/drivers/.../unbind
 Date:		March 2020
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		Writing a device name to this file will cause the driver to
 		attempt to unbind from the device. This may be useful when
 		overriding default bindings.
 
 What:		/sys/bus/vdpa/devices/.../driver_override
 Date:		November 2021
-Contact:	[email protected]-foundation.org
+Contact:	[email protected].dev
 Description:
 		This file allows the driver for a device to be specified.
 		When specified, only a driver with a name matching the value

Documentation/ABI/testing/sysfs-class-net-queues

@@ -96,3 +96,26 @@ Description:
 		Indicates the absolute minimum limit of bytes allowed to be
 		queued on this network device transmit queue. Default value is
 		0.
+
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_thrs
+Date:		Jan 2024
+KernelVersion:	6.9
+Contact:	[email protected]
+Description:
+		Tx completion stall detection threshold in ms. Kernel will
+		guarantee to detect all stalls longer than this threshold but
+		may also detect stalls longer than half of the threshold.
+
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_cnt
+Date:		Jan 2024
+KernelVersion:	6.9
+Contact:	[email protected]
+Description:
+		Number of detected Tx completion stalls.
+
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/stall_max
+Date:		Jan 2024
+KernelVersion:	6.9
+Contact:	[email protected]
+Description:
+		Longest detected Tx completion stall. Write 0 to clear.

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -516,6 +516,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/mds
 		/sys/devices/system/cpu/vulnerabilities/meltdown
 		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/reg_file_data_sampling
 		/sys/devices/system/cpu/vulnerabilities/retbleed
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/spectre_v1

Documentation/Makefile

@@ -111,7 +111,9 @@ $(YNL_INDEX): $(YNL_RST_FILES)
 $(YNL_RST_DIR)/%.rst: $(YNL_YAML_DIR)/%.yaml $(YNL_TOOL)
 	$(Q)$(YNL_TOOL) -i $< -o $@
 
-htmldocs: $(YNL_INDEX)
+htmldocs texinfodocs latexdocs epubdocs xmldocs: $(YNL_INDEX)
+
+htmldocs:
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
 
@@ -176,6 +178,7 @@ refcheckdocs:
 	$(Q)cd $(srctree);scripts/documentation-file-ref-check
 
 cleandocs:
+	$(Q)rm -f $(YNL_INDEX) $(YNL_RST_FILES)
 	$(Q)rm -rf $(BUILDDIR)
 	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media clean
 

Documentation/RCU/checklist.rst

@@ -68,7 +68,8 @@ over a rather long period of time, but improvements are always welcome!
 	rcu_read_lock_sched(), or by the appropriate update-side lock.
 	Explicit disabling of preemption (preempt_disable(), for example)
 	can serve as rcu_read_lock_sched(), but is less readable and
-	prevents lockdep from detecting locking issues.
+	prevents lockdep from detecting locking issues.  Acquiring a
+	spinlock also enters an RCU read-side critical section.
 
 	Please note that you *cannot* rely on code known to be built
 	only in non-preemptible kernels.  Such code can and will break,
@@ -382,16 +383,17 @@ over a rather long period of time, but improvements are always welcome!
 	must use whatever locking or other synchronization is required
 	to safely access and/or modify that data structure.
 
-	Do not assume that RCU callbacks will be executed on the same
-	CPU that executed the corresponding call_rcu() or call_srcu().
-	For example, if a given CPU goes offline while having an RCU
-	callback pending, then that RCU callback will execute on some
-	surviving CPU.	(If this was not the case, a self-spawning RCU
-	callback would prevent the victim CPU from ever going offline.)
-	Furthermore, CPUs designated by rcu_nocbs= might well *always*
-	have their RCU callbacks executed on some other CPUs, in fact,
-	for some  real-time workloads, this is the whole point of using
-	the rcu_nocbs= kernel boot parameter.
+	Do not assume that RCU callbacks will be executed on
+	the same CPU that executed the corresponding call_rcu(),
+	call_srcu(), call_rcu_tasks(), call_rcu_tasks_rude(), or
+	call_rcu_tasks_trace().  For example, if a given CPU goes offline
+	while having an RCU callback pending, then that RCU callback
+	will execute on some surviving CPU.  (If this was not the case,
+	a self-spawning RCU callback would prevent the victim CPU from
+	ever going offline.)  Furthermore, CPUs designated by rcu_nocbs=
+	might well *always* have their RCU callbacks executed on some
+	other CPUs, in fact, for some  real-time workloads, this is the
+	whole point of using the rcu_nocbs= kernel boot parameter.
 
 	In addition, do not assume that callbacks queued in a given order
 	will be invoked in that order, even if they all are queued on the
@@ -444,7 +446,7 @@ over a rather long period of time, but improvements are always welcome!
 	real-time workloads than is synchronize_rcu_expedited().
 
 	It is also permissible to sleep in RCU Tasks Trace read-side
-	critical, which are delimited by rcu_read_lock_trace() and
+	critical section, which are delimited by rcu_read_lock_trace() and
 	rcu_read_unlock_trace().  However, this is a specialized flavor
 	of RCU, and you should not use it without first checking with
 	its current users.  In most cases, you should instead use SRCU.
@@ -490,6 +492,12 @@ over a rather long period of time, but improvements are always welcome!
 		since the last time that you passed that same object to
 		call_rcu() (or friends).
 
+	CONFIG_RCU_STRICT_GRACE_PERIOD:
+		combine with KASAN to check for pointers leaked out
+		of RCU read-side critical sections.  This Kconfig
+		option is tough on both performance and scalability,
+		and so is limited to four-CPU systems.
+
 	__rcu sparse checks:
 		tag the pointer to the RCU-protected data structure
 		with __rcu, and sparse will warn you if you access that

Documentation/RCU/rcu_dereference.rst

@@ -408,7 +408,10 @@ member of the rcu_dereference() to use in various situations:
 	RCU flavors, an RCU read-side critical section is entered
 	using rcu_read_lock(), anything that disables bottom halves,
 	anything that disables interrupts, or anything that disables
-	preemption.
+	preemption.  Please note that spinlock critical sections
+	are also implied RCU read-side critical sections, even when
+	they are preemptible, as they are in kernels built with
+	CONFIG_PREEMPT_RT=y.
 
 2.	If the access might be within an RCU read-side critical section
 	on the one hand, or protected by (say) my_lock on the other,

Documentation/RCU/torture.rst

@@ -318,7 +318,7 @@ Suppose that a previous kvm.sh run left its output in this directory::
 
 	tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
 
-Then this run can be re-run without rebuilding as follow:
+Then this run can be re-run without rebuilding as follow::
 
 	kvm-again.sh tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
 

Documentation/RCU/whatisRCU.rst

@@ -172,14 +172,25 @@ rcu_read_lock()
 	critical section.  Reference counts may be used in conjunction
 	with RCU to maintain longer-term references to data structures.
 
+	Note that anything that disables bottom halves, preemption,
+	or interrupts also enters an RCU read-side critical section.
+	Acquiring a spinlock also enters an RCU read-side critical
+	sections, even for spinlocks that do not disable preemption,
+	as is the case in kernels built with CONFIG_PREEMPT_RT=y.
+	Sleeplocks do *not* enter RCU read-side critical sections.
+
 rcu_read_unlock()
 ^^^^^^^^^^^^^^^^^
 	void rcu_read_unlock(void);
 
 	This temporal primitives is used by a reader to inform the
 	reclaimer that the reader is exiting an RCU read-side critical
-	section.  Note that RCU read-side critical sections may be nested
-	and/or overlapping.
+	section.  Anything that enables bottom halves, preemption,
+	or interrupts also exits an RCU read-side critical section.
+	Releasing a spinlock also exits an RCU read-side critical section.
+
+	Note that RCU read-side critical sections may be nested and/or
+	overlapping.
 
 synchronize_rcu()
 ^^^^^^^^^^^^^^^^^
@@ -952,8 +963,8 @@ unfortunately any spinlock in a ``SLAB_TYPESAFE_BY_RCU`` object must be
 initialized after each and every call to kmem_cache_alloc(), which renders
 reference-free spinlock acquisition completely unsafe.  Therefore, when
 using ``SLAB_TYPESAFE_BY_RCU``, make proper use of a reference counter.
-(Those willing to use a kmem_cache constructor may also use locking,
-including cache-friendly sequence locking.)
+(Those willing to initialize their locks in a kmem_cache constructor
+may also use locking, including cache-friendly sequence locking.)
 
 With traditional reference counting -- such as that implemented by the
 kref library in Linux -- there is typically code that runs when the last

Documentation/admin-guide/RAS/address-translation.rst

@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Address translation
+===================
+
+x86 AMD
+-------
+
+Zen-based AMD systems include a Data Fabric that manages the layout of
+physical memory. Devices attached to the Fabric, like memory controllers,
+I/O, etc., may not have a complete view of the system physical memory map.
+These devices may provide a "normalized", i.e. device physical, address
+when reporting memory errors. Normalized addresses must be translated to
+a system physical address for the kernel to action on the memory.
+
+AMD Address Translation Library (CONFIG_AMD_ATL) provides translation for
+this case.
+
+Glossary of acronyms used in address translation for Zen-based systems
+
+* CCM               = Cache Coherent Moderator
+* COD               = Cluster-on-Die
+* COH_ST            = Coherent Station
+* DF                = Data Fabric

Documentation/RAS/ras.rst → Documentation/admin-guide/RAS/error-decoding.rst

@@ -1,15 +1,10 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-Reliability, Availability and Serviceability features
-=====================================================
-
-This documents different aspects of the RAS functionality present in the
-kernel.
-
 Error decoding
----------------
+==============
 
-* x86
+x86
+---
 
 Error decoding on AMD systems should be done using the rasdaemon tool:
 https://github.com/mchehab/rasdaemon/

Documentation/admin-guide/RAS/index.rst

@@ -0,0 +1,7 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. toctree::
+   :maxdepth: 2
+
+   main
+   error-decoding
+   address-translation

Documentation/admin-guide/ras.rst → Documentation/admin-guide/RAS/main.rst

@@ -1,8 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
 .. include:: <isonum.txt>
 
-============================================
-Reliability, Availability and Serviceability
-============================================
+==================================================
+Reliability, Availability and Serviceability (RAS)
+==================================================
+
+This documents different aspects of the RAS functionality present in the
+kernel.
 
 RAS concepts
 ************

Documentation/admin-guide/README.rst

@@ -262,9 +262,11 @@ Compiling the kernel
  - Make sure you have at least gcc 5.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
- - Do a ``make`` to create a compressed kernel image. It is also
-   possible to do ``make install`` if you have lilo installed to suit the
-   kernel makefiles, but you may want to check your particular lilo setup first.
+ - Do a ``make`` to create a compressed kernel image. It is also possible to do
+   ``make install`` if you have lilo installed or if your distribution has an
+   install script recognised by the kernel's installer. Most popular
+   distributions will have a recognized install script. You may want to
+   check your distribution's setup first.
 
    To do the actual install, you have to be root, but none of the normal
    build should require that. Don't take the name of root in vain.
@@ -301,32 +303,51 @@ Compiling the kernel
    image (e.g. .../linux/arch/x86/boot/bzImage after compilation)
    to the place where your regular bootable kernel is found.
 
- - Booting a kernel directly from a floppy without the assistance of a
-   bootloader such as LILO, is no longer supported.
-
-   If you boot Linux from the hard drive, chances are you use LILO, which
-   uses the kernel image as specified in the file /etc/lilo.conf.  The
-   kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
-   /boot/bzImage.  To use the new kernel, save a copy of the old image
-   and copy the new image over the old one.  Then, you MUST RERUN LILO
-   to update the loading map! If you don't, you won't be able to boot
-   the new kernel image.
-
-   Reinstalling LILO is usually a matter of running /sbin/lilo.
-   You may wish to edit /etc/lilo.conf to specify an entry for your
-   old kernel image (say, /vmlinux.old) in case the new one does not
-   work.  See the LILO docs for more information.
-
-   After reinstalling LILO, you should be all set.  Shutdown the system,
+ - Booting a kernel directly from a storage device without the assistance
+   of a bootloader such as LILO or GRUB, is no longer supported in BIOS
+   (non-EFI systems). On UEFI/EFI systems, however, you can use EFISTUB
+   which allows the motherboard to boot directly to the kernel.
+   On modern workstations and desktops, it's generally recommended to use a
+   bootloader as difficulties can arise with multiple kernels and secure boot.
+   For more details on EFISTUB,
+   see "Documentation/admin-guide/efi-stub.rst".
+
+ - It's important to note that as of 2016 LILO (LInux LOader) is no longer in
+   active development, though as it was extremely popular, it often comes up
+   in documentation. Popular alternatives include GRUB2, rEFInd, Syslinux,
+   systemd-boot, or EFISTUB. For various reasons, it's not recommended to use
+   software that's no longer in active development.
+
+ - Chances are your distribution includes an install script and running
+   ``make install`` will be all that's needed. Should that not be the case
+   you'll have to identify your bootloader and reference its documentation or
+   configure your EFI.
+
+Legacy LILO Instructions
+------------------------
+
+
+ - If you use LILO the kernel images are specified in the file /etc/lilo.conf.
+   The kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
+   /boot/bzImage. To use the new kernel, save a copy of the old image and copy
+   the new image over the old one. Then, you MUST RERUN LILO to update the
+   loading map! If you don't, you won't be able to boot the new kernel image.
+
+ - Reinstalling LILO is usually a matter of running /sbin/lilo. You may wish
+   to edit /etc/lilo.conf to specify an entry for your old kernel image
+   (say, /vmlinux.old) in case the new one does not work. See the LILO docs
+   for more information.
+
+ - After reinstalling LILO, you should be all set. Shutdown the system,
    reboot, and enjoy!
 
-   If you ever need to change the default root device, video mode,
-   etc. in the kernel image, use your bootloader's boot options
-   where appropriate.  No need to recompile the kernel to change
-   these parameters.
+ - If you ever need to change the default root device, video mode, etc. in the
+   kernel image, use your bootloader's boot options where appropriate. No need
+   to recompile the kernel to change these parameters.
 
  - Reboot with the new kernel and enjoy.
 
+
 If something goes wrong
 -----------------------