kamailio-finnished lab

asterisk/archive/asterisk/acl.conf

@@ -0,0 +1,80 @@
+;
+; Named Access Control Lists (ACLs)
+;
+; A convenient way to share acl definitions
+;
+; This configuration file is read on startup
+;
+; CLI Commands
+; -----------------------------------------------------------
+;   acl show                         Show all named ACLs configured
+;   acl show <name>                  Show contents of a particular named ACL
+;   reload acl                       Reload configuration file
+;
+; Any configuration that uses ACLs which has been made to be able to use named
+; ACLs will specify a named ACL with the 'acl' option in its configuration in
+; a similar fashion to the usual 'permit' and 'deny' options. Example:
+; acl=my_named_acl
+;
+; Multiple named ACLs can be applied by either comma separating the arguments or
+; just by adding additional ACL lines. Example:
+; acl=my_named_acl
+; acl=my_named_acl2
+;
+; or
+;
+; acl=my_named_acl,my_named_acl2
+;
+; ACLs specified by name are evaluated independently from the ACL specified via
+; permit/deny. In order for an address to pass a given ACL, it must pass both
+; the ACL specified by permit/deny for a given item as well as any named ACLs
+; that were specified.
+;
+;[example_named_acl1]
+;deny=0.0.0.0/0.0.0.0
+;permit=209.16.236.0
+;permit=209.16.236.1
+;
+;[example_named_acl2]
+;permit=0.0.0.0/0.0.0.0
+;deny=10.24.20.171
+;deny=10.24.20.103
+;deny=209.16.236.1
+;
+; example_named_acl1 above shows an example of whitelisting. When whitelisting, the
+; named ACLs should follow a deny that blocks everything (like deny=0.0.0.0/0.0.0.0)
+; The following example explains how combining the ACLs works:
+; <in another configuration>
+; [example_item_with_acl]
+; acl=example_named_acl1
+; acl=example_named_acl2
+;
+; Suppose 209.16.236.0 tries to communicate and the ACL for that example is applied to it...
+; First, example_named_acl1 is evaluated. The address is allowed by that ACL.
+; Next, example_named_acl2 is evaluated. The address isn't blocked by example_named_acl2
+; either, so it passes.
+;
+; Suppose instead 209.16.236.1 tries to communicate and the same ACL is applied.
+; First, example_named_acl1 is evaluated and the address is allowed.
+; However, it is blocked by example_named_acl2, so the address is blocked from the combined
+; ACL.
+;
+; Similarly, the permits/denies in specific configurations that make up an ACL definition
+; are also treated as a separate ACL for evaluation. So if we change the example above to:
+; <in another configuration>
+; [example_item_with_acl]
+; acl=example_named_acl1
+; acl=example_named_acl2
+; deny=209.16.236.0
+;
+; Then 209.16.236.0 will be rejected by the non-named component of the combined ACL even
+; though it passes the two named components.
+;
+;
+; Named ACLs can use ipv6 addresses just like normal ACLs.
+;[ipv6_example_1]
+;deny = ::
+;permit = ::1/128
+;
+;[ipv6_example_2]
+;permit = fe80::21d:bad:fad:2323

asterisk/archive/asterisk/adsi.conf

@@ -0,0 +1,8 @@
+;
+; Sample ADSI Configuration file
+;
+[intro]
+alignment = center
+greeting => Welcome to the
+greeting => Asterisk
+greeting => Open Source PBX

asterisk/archive/asterisk/agents.conf

@@ -0,0 +1,70 @@
+;
+; Agent pool configuration
+;
+
+[general]
+; The general section of this config is not currently used, but reserved
+; for future use.
+
+;[agent-id]
+; Define ackcall to require the agent to give a DTMF acknowledgement
+; when the agent receives a call.
+; The channel variable AGENTACKCALL overrides on agent login.
+; Default is "no".
+;ackcall=no
+;
+; Set what DTMF key sequence the agent should use to acknowledge a call.
+; The channel variable AGENTACCEPTDTMF overrides on agent login.
+; This option is ignored unless ackcall is enabled.
+; Default is "#".
+;acceptdtmf=##
+;
+; Set how many seconds a call for the agent has to wait for the agent to
+; acknowledge the call before the agent is automatically logged off.  If
+; set to zero then the call will wait forever for the agent to acknowledge.
+; The channel variable AGENTAUTOLOGOFF overrides on agent login.
+; This option is ignored unless ackcall is enabled.
+; Default is 0.
+;autologoff=15
+;
+; Set the minimum amount of time after disconnecting a call before
+; the agent can receive a new call in milliseconds.
+; The channel variable AGENTWRAPUPTIME overrides on agent login.
+; Default is 0.
+;wrapuptime=5000
+;
+; Set the musiconhold class for the agent.
+; Default is "default".
+;musiconhold=default
+;
+; Enable recording calls the agent takes automatically by invoking the
+; DTMF automixmon feature when the agent connects to a caller.
+; See features.conf.sample for information about the automixmon feature.
+; Default is "no".
+;recordagentcalls=yes
+;
+; The sound file played to alert the agent when a call is present.
+; Default is "beep".
+;custom_beep=beep
+;
+; A friendly name for the agent used in log messages.
+; Default is "".
+;fullname=Mark Spencer
+;
+; --------------------------------------------------
+;
+; This section contains example agent definitions:
+;
+; Define a template called my-agents:
+;[my-agents](!)
+;autologoff=15
+;ackcall=yes
+;acceptdtmf=##
+;
+; Define agent 1001 using the my-agents template:
+;[1001](my-agents)
+;fullname=Mark Spencer
+;
+; Define agent 1002 using the my-agents template:
+;[1002](my-agents)
+;fullname=Will Meadows

asterisk/archive/asterisk/alarmreceiver.conf

@@ -0,0 +1,91 @@
+;
+; alarmreceiver.conf
+;
+; Sample configuration file for the Asterisk alarm receiver application.
+;
+
+
+[general]
+
+;
+; Specify a timestamp format for the metadata section of the event files
+; Default is %a %b %d, %Y @ %H:%M:%S %Z
+
+timestampformat = %a %b %d, %Y @ %H:%M:%S %Z
+
+;
+; Specify a command to execute when the caller hangs up
+;
+; Default is none
+;
+
+;eventcmd = yourprogram -yourargs ...
+
+;
+; Specify a spool directory for the event files. This setting is required
+; if you want the app to be useful. Event files written to the spool
+; directory will be of the template event-XXXXXX, where XXXXXX is a random
+; and unique alphanumeric string.
+;
+; Default is none, and the events will be dropped on the floor.
+;
+
+eventspooldir = /tmp
+
+;
+; The alarmreceiver app can either log the events one-at-a-time to individual
+; files in the spool directory, or it can store them until the caller
+; disconnects and write them all to one file.
+;
+; The default setting for logindividualevents is no.
+;
+
+logindividualevents = no
+
+;
+; The timeout for receiving the first DTMF digit is adjustable from 1000 msec.
+; to 10000 msec. The default is 2000 msec. Note: if you wish to test the
+; receiver by entering digits manually, set this to a reasonable time out
+; like 10000 milliseconds.
+
+fdtimeout = 2000
+
+;
+; The timeout for receiving subsequent DTMF digits is adjustable from
+; 110 msec. to 4000 msec. The default is 200 msec. Note: if you wish to test
+; the receiver by entering digits manually, set this to a reasonable time out
+; like 4000 milliseconds.
+;
+
+sdtimeout = 200
+
+;
+; Wait for the connection to settle post-answer. Adjustable from 500 msec. to 10000 msec.
+; The default is 1250 msec.
+;
+
+answait = 1250
+
+; When logging individual events it may be desirable to skip grouping of metadata
+
+;no_group_meta = yes
+
+;
+; The loudness of the ACK and Kissoff tones is adjustable from 100 to 8192.
+; The default is 8192. This shouldn't need to be messed with, but is included
+; just in case there are problems with signal levels.
+;
+
+loudness = 8192
+
+;
+; The db-family setting allows the user to capture statistics on the number of
+; calls, and the errors the alarm receiver sees. The default is for no
+; db-family name to be defined and the database logging to be turned off.
+;
+
+;db-family = yourfamily:
+
+;
+; End of alarmreceiver.conf
+;

asterisk/archive/asterisk/alsa.conf

@@ -0,0 +1,77 @@
+;
+; Open Sound System Console Driver Configuration File
+;
+[general]
+;
+; Automatically answer incoming calls on the console?  Choose yes if
+; for example you want to use this as an intercom.
+;
+autoanswer=yes
+;
+; Default context (is overridden with @context syntax)
+;
+context=local
+;
+; Default extension to call
+;
+extension=s
+;
+; Default language
+;
+;language=en
+;
+; Default Music on Hold class to use when this channel is placed on hold in
+; the case that the music class is not set on the channel with
+; Set(CHANNEL(musicclass)=whatever) in the dialplan and the peer channel
+; putting this one on hold did not suggest a class to use.
+;
+;mohinterpret=default
+;
+; Silence suppression can be enabled when sound is over a certain threshold.
+; The value for the threshold should probably be between 500 and 2000 or so,
+; but your mileage may vary.  Use the echo test to evaluate the best setting.
+;silencesuppression = yes
+;silencethreshold = 1000
+;
+; To set which ALSA device to use, change this parameter
+;input_device=hw:0,0
+;output_device=hw:0,0
+
+;
+; Default mute state (can also be toggled via CLI)
+;mute=true
+
+;
+; If enabled, no audio capture device will be opened.  This is useful on
+; systems where there will be no return audio path, such as overhead pagers.
+;noaudiocapture=true
+
+; ----------------------------- JITTER BUFFER CONFIGURATION --------------------------
+; jbenable = yes              ; Enables the use of a jitterbuffer on the receiving side of an
+                              ; ALSA channel. Defaults to "no". An enabled jitterbuffer will
+                              ; be used only if the sending side can create and the receiving
+                              ; side can not accept jitter. The ALSA channel can't accept jitter,
+                              ; thus an enabled jitterbuffer on the receive ALSA side will always
+                              ; be used if the sending side can create jitter.
+
+; jbmaxsize = 200             ; Max length of the jitterbuffer in milliseconds.
+
+; jbresyncthreshold = 1000    ; Jump in the frame timestamps over which the jitterbuffer is
+                              ; resynchronized. Useful to improve the quality of the voice, with
+                              ; big jumps in/broken timestamps, usually sent from exotic devices
+                              ; and programs. Defaults to 1000.
+
+; jbimpl = fixed              ; Jitterbuffer implementation, used on the receiving side of a SIP
+                              ; channel. Two implementations are currently available - "fixed"
+                              ; (with size always equals to jbmax-size) and "adaptive" (with
+                              ; variable size, actually the new jb of IAX2). Defaults to fixed.
+
+; jbtargetextra = 40          ; This option only affects the jb when 'jbimpl = adaptive' is set.
+                              ; The option represents the number of milliseconds by which the new
+                              ; jitter buffer will pad its size. the default is 40, so without
+                              ; modification, the new jitter buffer will set its size to the jitter
+                              ; value plus 40 milliseconds. increasing this value may help if your
+                              ; network normally has low jitter, but occasionally has spikes.
+
+; jblog = no                  ; Enables jitterbuffer frame logging. Defaults to "no".
+; ----------------------------------------------------------------------------------

asterisk/archive/asterisk/amd.conf

@@ -0,0 +1,27 @@
+;
+; Answering Machine Detection Configuration
+;
+
+[general]
+total_analysis_time = 5000	; Maximum time allowed for the algorithm to decide
+				; on whether the audio represents a HUMAN, or a MACHINE
+silence_threshold = 256		; If the average level of noise in a sample does not reach
+				; this value, from a scale of 0 to 32767, then we will consider
+				; it to be silence.
+
+; Greeting ;
+initial_silence = 2500		; Maximum silence duration before the greeting.
+				; If exceeded, then the result is detection as a MACHINE.
+after_greeting_silence = 800	; Silence after detecting a greeting.
+				; If exceeded, then the result is detection as a HUMAN
+greeting = 1500			; Maximum length of a greeting. If exceeded, then the
+				; result is detection as a MACHINE.
+
+; Word detection ;
+min_word_length = 100		; Minimum duration of Voice to considered as a word
+maximum_word_length = 5000  	; Maximum duration of a single Voice utterance allowed.
+between_words_silence = 50	; Minimum duration of silence after a word to consider
+				; the audio what follows as a new word
+
+maximum_number_of_words = 2	; Maximum number of words in the greeting
+				; If exceeded, then the result is detection as a MACHINE

asterisk/archive/asterisk/app_mysql.conf

@@ -0,0 +1,24 @@
+; Configuration file for the MYSQL app addon
+
+[general]
+;
+; Nullvalue governs how NULL values are returned from the database.  In
+; previous versions, the special NULL value was returned as the "NULL"
+; string.  We now provide an option for the behavior, configured globally.
+; nullstring  - the string "NULL"
+; emptystring - the string ""
+; null        - unset the variable
+;
+; WARNING: setting nullvalue=null may have undesireable consequences, in
+; particular if you use subroutines in AEL or the LOCAL() variable construct.
+; You have been warned.  Don't complain if you use that setting in combination
+; with Gosub or AEL and get buggy behavior.
+;
+nullvalue = nullstring
+
+; If set, autoclear will destroy allocated statement and connection resources
+; when the channel ends.  For most usage of the MYSQL app, this is what you
+; want, but it's conceivable that somebody is sharing MYSQL connections across
+; multiple channels, in which case, this should be set to 'no'.  Defaults to
+; 'no', as this was the original behavior.
+autoclear=yes