Settings and Notes Related to the Anycubic 4Max Pro 3D Printer
If "Origin at Center" is checked when slicing the printer seems to print off the printbed and in the lower left quadrant. Recommendation is to keep this setting unchecked.
Settings / Printer / Manage Printers
Edit Machine Settings
Printer
Printer Settings
X (Width): 270mm
Y (Depth): 205 mm
Z (Height): 205 mm
Build Plate Shape: Rectangular
Origin at Center: Unchecked
Heated Bed: Checked
Heated Build Volume: Unchecked
G-Code Flavor: Marlin
Printhead Settings
X min: 0
Y min: 0
X max: 205
Y max: 205
Gantry Height: 25.0
Number of Extruders: 1
Start G-Code
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 X-3 Y40 ;Anycubic 4Max Pro Brush
G1 X-3 Y5 ;Anycubic 4Max Pro Brush
G1 X-3 Y40 ;Anycubic 4Max Pro Brush
G1 X-3 Y5 ;Anycubic 4Max Pro Brush
G1 Z15.0 F{speed_travel} ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{speed_travel}
M117 Printing...
G5
End G-Code
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M84 ; disable motors
M107
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more
G28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way
G1 Y180 F2000
M84 ;steppers off
G90
M300 P300 S4000
Extruder 1
Nozzle Settings
Nozzle Size: 0.4 mm
Compatible Material Diameter: 1.75 mm
Nozzle Offset X: 0 mm
Nozzle Offset Y: 0 mm
Cooling Fan Number: 0
Extruder Start G-Code: Blank
Extruder End G-Code: Blank