forked from adlerweb/asysbus
-
Notifications
You must be signed in to change notification settings - Fork 0
Message Types and Commands
kaixxx edited this page Jan 5, 2019
·
4 revisions
Message targets a single node. Used for configuration.
Message targets a group. Used for control messages.
Message targets all nodes. Used for informational messages.
Messages can carry command + max 7 bytes of payload
| Command | Length (bytes) | Purpose |
|---|---|---|
| 0x21 | 0 | Node has booted |
| 0x40 | 0 | Request state |
| 0x50 | 0 | 0 Bit Message (e.g. S0-Sensor) |
| 0x51 | 1 | 1 Bit Message (e.g. on/off) |
| 0x52 | 1 | percent Message (e.g. dimmer,position) |
| 0x70 | 0 | PING |
| 0x71 | 0 | PONG |
| 0x75 | 0 | Wake node from sleep |
| 0x80 | 2 | READ_CONFIG |
| 0x81 | 3 | WRITE_CONFIG |
| 0x82 | 2 | COMMIT CONFIG |
| 0x85 | 2 | REIDENT |
| 0xA0 | 2 | Temperature |
| 0xA1 | 2 | Humidity |
| 0xA2 | 2 | Pressure |
| 0xA5 | 4 | Lux |
| 0xA6 | 2 | UV-Index |
| 0xA7 | 4 | IR |
| 0xB0 | ?? | PM2.5 |
| 0xB1 | ?? | PM10 |
| 0xC0 | 2 | Voltage |
| 0xC1 | 2 | Ampere |
| 0xC2 | 2 | Power (W/VA) |
| 0xD0 | 1 | Generic % (Valve, etc) |
| 0xD1 | 2 | Generic ‰ |
| 0xD2 | 2 | Parts per million |
| 0xD5 | 2 | something per year |
| 0xD6 | 2 | something per month |
| 0xD7 | 2 | something per day |
| 0xD8 | 2 | something per hour |
| 0xD9 | 2 | something per minute |
| 0xDA | 2 | something per second |