New WireGuard guide for Mikrotik

src/content/en/pages/setup/router/mikrotik-wireguard.md

@@ -0,0 +1,96 @@
+---
+title: Mikrotik WireGuard Setup Guide
+listItem: Mikrotik WireGuard
+url: /setup/router/mikrotik-wireguard/
+section: Router Setup
+platform: router
+layout: setup-article
+weight: 63
+---
+## Mikrotik WireGuard Setup Guide
+
+<div markdown="1" class="notice notice--warning">
+This guide was produced using RouterOS 7.15.3.<br>
+A MikroTik router with RouterOS v7 or later is required. WireGuard is not available in earlier versions.
+</div>
+
+### Generating WireGuard config file
+
+1. Navigate to our WireGuard [config file generator](/account/wireguard-config) page.
+
+2. Click on the `Generate key` button, choose the VPN server with the preferred settings.
+
+3. Download and extract the zip archive.
+<div markdown="1" class="notice notice--info">
+WireGuard config file generator is only available for accounts that were created after November 2020 (account ID format: i-XXXX-XXXX-XXXX). If you have an IVPN subscription created before this date (account ID format: ivpnXXXXXXXX) and wish to make use of the feature, contact our customer service to help you make the switch.
+</div>
+
+### Configuring WireGuard interface and peer
+
+1. Log in to your router's web interface.
+
+2. Navigate to `Files`, click the `Upload` button and select extracted previously WireGuard config file.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-01.png)
+
+3. In the `WireGuard` area, click on the `WG Import` and select the uploaded config file.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-011.png)
+
+4. In the `Peers` tab, double-click on the added Peer and enter the following configuration:
+
+    * Name - give it any name, e.g. **IVPN_Ukraine**
+    * Interface - the name of your WireGuard interface, **wg1** by default
+    * Endpoint - the IP address of the VPN server (located in the generated WG config file, `Endpoint` field)
+    * Port - the `Endpoint's` port, e.g. **2049**
+    * Allowed Address - **0.0.0.0/0** and **::/0** below
+    * Persistent Keepalive - **25**
+    * Client DNS - enter the WireGuard's regular DNS server IP address **172.16.0.1** or the one associated with the preferred [AntiTracker](/knowledgebase/troubleshooting/what-is-the-ip-address-of-your-dns-servers/) list
+
+5. Hit `Apply` and `Okay`.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-02.png)
+
+6. Navigate to `IP` - `Addresses`, click `+` and enter the following:
+
+    * Address - the assigned WireGuard interface IP address (found in the generated WG config file, `Address` field)
+    * Interface - **wg1**
+
+7. Hit `Apply` and `Okay`.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-03.png)
+
+### Configuring Routing and Firewall
+
+1. Navigate to `Routing` - `Tables`, click `+` to create a new table. Give it any name, e.g. `WG-Table`, check the `FIB` option and `Apply` the changes.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-04.png)
+
+2. In `Routing` - `Rules`, click `+` to add a new rule and fill in the following fields:
+
+    * Src. Address - the IP address of your local network, e.g. **10.0.0.0/24**
+    * Action - **Lookup only in table**
+    * Table - **WG-Table**
+
+3. Hit `Apply` and `Okay`.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-05.png)
+
+4. In `IP` - `Routes`, click `+` to create a new route with the following configuration:
+
+    * Dst.Address - **0.0.0.0/0**
+    * Gateway - **wg1**
+    * Routing Table - **WG-Table**
+
+5. Hit `Apply` and `Okay`.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-06.png)
+
+6. In `IP` - `Firewall` - `NAT` tab, click `+` and fill in the following:
+
+    * Chain - **srcnat**
+    * Src. Address - the IP address of your local network, specified in step #2 (e.g. **10.0.0.0/24**)
+    * Out. Interface - **wg1**
+    * Action tab Action - **Masquerade**
+
+7. Hit `Apply` and `Okay`.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-07.png)
+
+### Configuring DNS
+
+1. In `IP` - `DNS`, enter the WireGuard's regular DNS server IP address (172.16.0.1) or the one associated with the preferred [AntiTracker](/knowledgebase/troubleshooting/what-is-the-ip-address-of-your-dns-servers/) list into the `Servers` field and apply the changes.
+
+2. In `IP` - `DHCP Server`, double-click on your local network and enter the same DNS IP address into the `DNS Servers` field.
+
+3. `Apply` the changes.<br></br>![](/images-static/uploads/install-wireguard-mikrotik-08.png)
+
+### Final Steps
+
+1. Restart the router.
+
+2. Check the conenction status and the assigned public IP address on our website and run a DNS leak test at [https://www.dnsleaktest.com](https://www.dnsleaktest.com) from one of the devices connected to your Mikrotik router.