Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
### Breaking changes · [Migration guide](https://zwave-js.github.io/node-zwave-js/#/getting-started/migrating-to-v6) * Logging can now be configured through driver options. However, the environment variables for logging are no longer evaluated lazily, so they now need to be set before requiring `zwave-js`. * The second (string) parameter of the `"interview failed"` event handler was removed * The type `ValueMetadataBase` has been renamed to `ValueMetadataAny`. The old type `ValueMetadataAny` was merged into `ValueMetadataBase`. * The retry strategy for sending commands to nodes has been revised. By default, a message is no longer re-transmitted when the node has acknowledged its receipt, since it is unlikely that the retransmission will change anything. The old behavior can be restored by setting the `attempts.retryAfterTransmitReport` driver option to `true`. To compensate for the change and give the response enough time to reach the controller, the default for `timeouts.response` has been increased from `1600` to `10000`. * The driver now distinguishes between stateful and event values. The latter are now exclusively exposed through the `"value notification"` event. * The deprecated `nodeInterviewAttempts` option was removed * The options `fs` and `cacheDir` have been renamed to `storage.driver` and `storage.cacheDir`. * Loggers are now managed on a per-driver basis. This means you can use zwave-js to talk to different controllers and have separate logs for each. * The `lookupXYZ` methods are no longer exposed by `@zwave-js/config`. Use the `configManager` property of your driver instance instead. ### Config file changes * The index file was removed from the repo and is now generated on demand * Several improvements for GE dimmers and switches * Added missing config parameters to IDLock 150 * Added Innovelli LZW36 and First Alert ZCOMBO-G * Added Technisat Dimmer and series switch * Added Lifeline association to Danfoss MT 2649 * Added product id/type to NAS-WR01ZE * Added Inovelli LZW31 Black Series Dimmer * Added Aeotec ZW187 Recessed Door Sensor 7 * Added checks for partial parameters * Added Aeotec ZWA009 aerQ Temperature and Humidity Sensor * Added Honeywell 39348/ZW4008 * Added Zooz zst10-700 z-wave usb stick * Added Fibaro Smart Switch FGS-214 and FGS-224 * Added Fortrezz fts05p * Added an additional product type to Aeotec Range Extender 7 * Added a compat option `skipConfigurationInfoQuery` to work around a firmware issue in `Heat-It Z-TRM2fx` * Renamed config param zwave-js#11 in Q-Light Puck * New versions of `@zwave-js/config` are now automatically released every night if **only** config files were changed since the last release. You can run `npm update @zwave-js/config` in the `zwave-js` install dir to pull the latest config files. For now, a driver restart is required afterwards. ### Features * Added basic support for 700-series controllers * Added a compatibility option to disable the `Basic CC` mapping * An option was added to enable logging to the console, even if it is not a TTY * An option was added to control the filesystem access throttling * Improved the `label` for `Level low` property in `BatteryCC` * Unimplemented CCs may now be sent * The version of `zwave-js` is now exported as `libVersion` from the main entry point * Implemented `Battery CC V3` * Added support for `Hail CC` * ValueIDs that use a `Duration` instance as the value now have the metadata type `"duration"` * Added a workaround for devices that return an invalid response when finding the first configuration param ### Bugfixes * Fixed an off-by-one error in the `Binary Sensor Supported Report` bitmask. **Note:** If your devices are affected by this bug, re-interview them to remove corrupted values. * Expire nonces for `keepS0NonceUntilNext` devices until **after** the next nonce was received by the device * The interview is no longer aborted when a device does not respond to the Wakeup Capability query * Fixed a crash that could happen when compressing the value DB with an existing backup file. * Fixed a wrong value ID for `Multilevel Switch CC` `targetValue` * The driver no longer assumes that a sleeping node falls asleep after a certain time ### Changes under the hood * Test releases for PRs can now be created with a command * PRs titles are now enforced to comply with conventional commits * Config json files are now automatically formatted in VSCode and linted * While editing device config files, supporting IDEs can now use a JSON schema to help you * We've added @zwave-js-bot to help us manage the repo and to help you contribute
- Loading branch information
