This document was written for those who want to learn Bash without diving in too deeply.
You can install this handbook using npm. Just run:
$ npm install -g bash-handbook
You should be able to run bash-handbook at the command line now. This will open the manual in your selected $PAGER. Otherwise, you may continue reading on here.
- Introduction
- Shells and modes
- Comments
- Variables
- Arrays
- Shell expansions
- Streams, pipes and lists
- Conditional statements
- Loops
- Functions
- Debugging
- Afterwords
- License
If you are a developer, then you know the value of time. Optimizing your work process is one of the most important aspects of the job.
In that path towards efficiency and productivity, we are often posed with actions that must be repeated over and over again, like taking a screenshot and uploading them to a server, processing text that may come in many shapes and forms, converting files between different formats, parsing a program's output and the list goes on. Enter bash, our savior.
Bash is a Unix shell written by Brian Fox for the GNU Project as a free software replacement for the Bourne shell. It was released in 1989 and has been distributed as the Linux and OS X default shell for a long time.
So why do we need to learn something that was written more than 30 years ago? The answer is simple: this something is today one of the most powerful and portable tools for writing efficient scripts for all Unix-based systems. And that's why you should learn bash. Period.
In this handbook, I'm going to describe the most important concepts in bash with examples. I hope this compendium will be helpful to you.
The user bash shell can work in two modes - interactive and non-interactive.
If you are working on Ubuntu, you can open the shell using the Ctrl-Alt-F1 keybinding. After that, the familiar GUI will disappear and one of the seven virtual terminals available in Ubuntu will be shown.
If you see something like this, then you are working in interactive mode:
user@host:~$
Here you can enter a variety of Unix commands, such as ls, grep, cd, mkdir, rm and see the result of their execution.
We call this shell interactive because it interacts directly with the user.
The desktop environment takes place in the seventh virtual terminal, so you can return to friendly GUI using the Ctrl-Alt-F7 keybinding.
Using a virtual terminal it's not really convenient. For example, if you want to edit a document and execute another command at the same you are better off using a virtual terminal emulators like:
In non-interactive mode, the shell reads commands from a file or a pipe and executes them. When the interpreter reaches the end of the file, the shell process terminates the session and returns to the parent process.
Use the following commands for running the shell in non-interactive mode:
sh /path/to/script.sh
bash /path/to/script.sh
In the example above, script.sh is just a regular text file that consists of commands the shell interpreter can evaluate and sh or bash is the shell's interpreter program. You can create script.sh using your preferred text editor (e.g. vim, nano, Sublime Text, Atom, etc).
You can also simplify invoking the script by making it an executable file using the chmod command:
chmod +x /path/to/script.sh
Additionally, the first line in the script must indicate the system which program it should use to run the file, like so:
#!/bin/bash
echo "Hello, world!"Or if you prefer to use sh instead of bash, change #!/bin/bash to #!/bin/sh. This #! character sequence is known as the shebang. Now you can run script like this:
/path/to/script.sh
Another handy thing we learned above is using the echo to print something to the terminal screen.
Every command returns an exit code (return status or exit status). A successful command always returns 0 (zero-code), and a command that has failed returns non-zero value (error code). Failure codes must be positive integers between 1 and 255.
Another handy command we can use when writing a script is exit. This command is used to terminate the current execution and deliver an exit code to the shell. Running exit code without any arguments, will terminate the running script and return the exit code of the last command executed before exit.
When a program terminates, the shell assigns its exit code to the #? environment variable. The #? variable is how we usually test whether a script has a succeeded or not in its execution.
In the same way we can use exit to terminate a script, we can use the return command to exit a function and return an exit code to the caller. You can use exit inside a function too and this will exit the function and terminate the program.
Scripts may contain comments. Comments are special statements ignored by the shell interpreter. They begin with a # symbol and continue on to the end of the line.
For example:
#!/bin/bash
# This script will print your username.
whoamiTip: Use comments to explain what your script does and why.
Like in most programming languages, you can also create variables in bash.
Bash knows no data types. Variables can contain only numbers or a string of one or more characters. There are three kinds of variables you can create: local variables, environment variables and variables as positional arguments.
Local variables are variables that exist only within a single script. They are inaccessible to other programs and scripts.
A local variable can be declared using = sign (as a rule, there should not be any spaces between a variable's name, = and its value) and its value can be retrieved using the $ sign. For example:
username="denysdovhan" # declare variable
echo $username # display value
unset username # delete variableWe can also declare a variable local to a single function using the local keyword. Doing so causes the variable to dissapoear when the function exits.
local local_var="I'm a local value"Environment variables are variables accessible to any program or script running in current shell session. They are created just like local variables, but using the keyword export instead.
export GLOBAL_VAR="I'm a global variable"There are a lot of global variables in bash. You will meet these variables fairly often, so here is a quick lookup table with the most practical ones:
| Variable | Description |
|---|---|
$HOME |
The current user's home directory. |
$PATH |
A colon-separated list of directories in which the shell looks for commands. |
$PWD |
The current working directory. |
$RANDOM |
Random integer between 0 and 32767. |
$UID |
The numeric, real user ID of the current user. |
$PS1 |
The primary prompt string. |
$PS2 |
The secondary prompt string. |
Follow this link to see an extended list of environment variables in Bash.
Positional arguments are variables allocated when a function is evaluated and are given positionally. The following table lists positional argument variables and other special variables and their meanings when you are inside a function.
| Parameter | Description |
|---|---|
$0 |
Script's name. |
$1 … $9 |
The argument list elements from 1 to 9. |
${10} … ${N} |
The argument list elements from 10 to N. |
$* or $@ |
All positional parameters except $0. |
$# |
The number of arguments, not counting $0. |
$FUNCNAME |
The function name (has a value only inside a function). |
In the example below, the positional arguments will be $0='./script.sh', $1='foo' and $2='bar':
./script.sh foo bar
Variables may also have default values. We can define as such using the following syntax:
# if variables are empty, assign then default values
: ${VAR:='default'}
: ${$1:='first'}Like in other programming languages, an array in bash is a variable that allows you to refer to multiple values. In bash, arrays are also zero-based, this is, the first element in an array has index 0.
When dealing with arrays, we should be aware of the special environment variable IFS. IFS or Input Field Separator — is the character that separates elements in an array. The default value is an empty space IFS=' '.
In bash you create an array by simply assigning a value to an index in the array variable:
fruits[0]=Apple
fruits[1]=Pear
fruits[2]=Plum
echo ${fruits[*]} # echo ${fruits[@]} may be used as wellArray variables can also be created using compound assignments such as:
fruits=(Apple Pear Plum)Besides, we can extract a slice of array using the slice operators:
echo ${fruits[*]:0:2} # Apple PearIn the example above, fruits[*] returns the entire contents of the array, and :0:2 extracts the slice of length 2, that starts at index 0.
Adding elements into an array is quite simple too. Compound assignments are specially useful in this case. We can use them like this:
fruits=(Orange ${fruits[*]} Banana Cherry)
echo ${fruits[*]} # Orange Apple Pear Plum Banana CherryThe example above, fruits[*] the entire contents of the array and substitutes it into the compound assignment, then assigns the new value into the fruits array mutating its original value.
To delete an element from an array, use the unset command:
unset fruits[0]
echo ${fruits[*]} # Apple Pear Plum Banana CherryExpansions are performed on the command line after it has been split into tokens. In other words, these expansions are mechanism to calculate arithmetical operations, to save results of command's executions and so on.
If you are interested, you can read more about shell expasions.
Brace expansion allow us to generate arbitrary strings. It's similar to filename expansion. For example:
echo beg{i,a,u}n # begin began begunAlso brace expansions may be used for creating ranges, which are iterated over in loops.
echo {0..5} # 0 1 2 3 4 5
echo {00..8..2} # 00 02 04 06 08Command substitution allow us to evaluate a command and substitute its value into another command or variable assignment. Command substitution is performed when a command is enclosed by `` in `` or $(). For example, we can use it as follows:
now=`date +%T`
# or
now=$(date +%T)
echo now # 19:08:26In bash we are free to do any arithmetical operations. But the expression must enclosed by $(( )) The format for arithmetic expansions is:
result=$(( ((10 + 5*3) - 7) / 2 ))
echo $result # 9There is an important difference between double and single quotes. Inside double quotes variables or command substitutions are expanded. Inside single quotes they are not. For example:
echo "Your home: $HOME" # Your home: /Users/<username>
echo 'Your home: $HOME' # Your home: $HOMEBash has powerful tools for working with other programs and their outputs. Using streams we can send the output of a program into another program or file and thereby write logs or whatever we want.
Pipes give us opportunity to create conveyors and control the execution of commands.
It is paramount we understand how to use this powerful and sophisticated tool.
Bash receives input and sends output as sequences or streams of characters. These streams may be redirected into files or one into another.
There are three descriptors:
| Code | Descriptor | Description |
|---|---|---|
0 |
stdin |
The standard input. |
1 |
stdout |
The standard output. |
2 |
stderr |
The errors output. |
Redirection makes it possible to control where the output of a command goes to, and where the input of a command comes from. For redirecting streams these operators are used:
| Operator | Description |
|---|---|
> |
Redirecting output |
&> |
Redirecting output and error output |
&>> |
Appending redirected output and error output |
< |
Redirecting input |
< |
Redirecting input |
<< |
Here documents syntax |
<<< |
Here strings |
Here are few examples of using redirections:
# output of ls will be written to list.txt
ls -l > list.txt
# append output to list.txt
ls -a >> list.txt
# all errors will be written to errors.txt
grep da * 2> errors.txt
# read from errors.txt
less < errors.txtWe could redirect standard streams not only in files, but also to other programs. Pipes let us use the output of a program as the input of another.
In the example below, command1 sends its output to command2, which then passes it on to the input of command3:
command1 | command2 | command3
Constructions like this are called pipelines.
In practice, this can be used to process data through several programs. For example, here the output of ls -l is sent to the grep program, which prints only files with a .md extension, and this output is finally sent to the less program:
ls -l | grep .md$ | less
A list of commands is a sequence of one or more pipelines separated by ;, &, && or || operator.
If a command is terminated by the control operator &, the shell executes the command asynchronously in a subshell. In other words, this command will be executing in the background.
Commands separated by a ; are executed sequentially: one after another. The shell waits for finish of each command.
# command2 will be executed after command1
command1 ; command2
# which is the same as
command1
command2Lists separated by && and || are called AND and OR lists, respectively.
The AND-list looks like this:
# command2 will be executed if, and only if, command1 finishes successfully (returns 0 exit status)
command1 && command2The OR-list has the form:
# command2 will be executed if, and only if, command finishes unsuccessfully (returns code of error)
command1 || command2The return code of AND and OR lists is the exit status of the last executed command.
Like in other languages, Bash conditionals let us decide to perform an action or not, depend on result by evaluating an expression, which should be enclosed in [[ ]].
Conditional expression may contain && and || operator, which are AND and OR accordingly. Beside this, there many other handy expression.
There are two different conditional statements: if statement and case statement.
Expressions enclosed inside [[ ]] are called test commands or primaries. These expressions help us to indicate result of an conditional.
Working with file system:
| Primary | Meaning |
|---|---|
[ -e FILE ] |
True if FILE exists and is a directory or regular file. |
[ -f FILE ] |
True if FILE exists and is a regular file. |
[ -d FILE ] |
True if FILE exists and is a directory. |
[ -s FILE ] |
True if FILE exists and not empty (size more than 0). |
[ -r FILE ] |
True if FILE exists and is readable. |
[ -w FILE ] |
True if FILE exists and is writable. |
[ -x FILE ] |
True if FILE exists and is executable. |
[ -L FILE ] |
True if FILE exists and is symbolic link. |
[ FILE1 -nt FILE2 ] |
FILE1 is newer than FILE2. |
[ FILE1 -ot FILE2 ] |
FILE1 is older than FILE2. |
Working with strings:
| Primary | Meaning |
|---|---|
[ -z STR ] |
STR is empty (the length is zero). |
[ -n STR ] |
STR is not empty (the length is non-zero). |
[ STR1 == STR2 ] |
STR1 and STR2 are equal. |
[ STR1 != STR2 ] |
STR1 and STR2 are not equal. |
Arithmetic binary operators:
| Primary | Meaning |
|---|---|
[ ARG1 -eq ARG2 ] |
ARG1 is equal to ARG2. |
[ ARG1 -ne ARG2 ] |
ARG1 is not equal to ARG2. |
[ ARG1 -lt ARG2 ] |
ARG1 is less than ARG2. |
[ ARG1 -le ARG2 ] |
ARG1 is less than or equal to ARG2. |
[ ARG1 -gt ARG2 ] |
ARG1 is greater than ARG2. |
[ ARG1 -ge ARG2 ] |
ARG1 is greater or equal to ARG2. |
Conditions may be combined using these combining expressions:
| Operation | Effect |
|---|---|
[ ! EXPR ] |
True if EXPR is false. |
[ (EXPR) ] |
Returns the value of EXPR. |
[ EXPR1 -a EXPR2 ] |
Logical AND. True if EXPR1 and EXPR2 are true. |
[ EXPR1 -o EXPR2 ] |
Logical OR. True if EXPR1 or EXPR2 are true. |
Sure, there is more useful primaries and you can easily find it in Bash man pages.
if statement works completely at the same way as it works in other programming languages. If the expression within braces is true, the code between then and fi, which indicates the end of the conditionally executed code.
# Single-line
if [[ 1 -eq 1 ]]; then echo "true"; fi;
# Multi-line
if [[ 1 -eq 1 ]]; then
echo "true";
fi;Likewise, we could use if..else statement such as:
# Single-line
if [[ 2 -ne 1 ]]; then echo "true"; else echo "false"; fi;
# Multi-line
if [[ 2 -ne 1 ]]; then
echo "true";
else
echo "false";
fi;Sometimes if..else statements are not enough to do what we want to do. In this case we shouldn't forget about the existence of if..elif..else statements, which always come in handy.
Look at the example below:
if [[ `uname` == "Adam" ]]; then
echo "Do not eat an apple!";
elif [[ `uname` == "Eva" ]]; then
echo "Do not take an apple!";
else
echo "Apples are delicious!";
fi;If you are confronted with a couple of different possible actions to take, then using of case statement may more useful than nested if statement. For more complex conditions use case like below:
case "$extension" in
"jpg"|"jpeg")
echo "It's image with jpeg extension."
;;
"png")
echo "It's image with png extension."
;;
"gif")
echo "Oh, it's a giphy!"
;;
*)
echo "Woops! It's not image!"
;;
esac;Each case is an expression matching a pattern. The | sign is used for separating multiple patterns, and the ) operator terminates a pattern list. The commands for the first match are executed. * it's pattern for anything else, than doesn't match with defined patterns. Each block of command should be divided with ;; operator.
Here we won't be surprised. As in any programming language, a loop in bash is a block of code that iterates as long as the control conditional is true.
There are three types of loops in Bash: for, while, until and select.
The for is very similar to its sibling in C. It looks like this:
for arg in elem1 elem2 ... elemN
do
# statements
doneDuring each pass through the loop, arg takes on the value from elem1 to elemN. Instead of these value may be wildcards or brace expansion.
Also, we can write for loop in one line, but in this case there needs to be semicolon before do, like below:
for i in {1..5}; do echo $i; doneBy the way, if for..in..do seems a little bit weird for you, as well you can write for in C-like style such as:
for (( i = 0; i < 10; i++ )); do
echo $i
donefor is handy when we want to do the same operation over each file in directory. For example, if we need to move all .bash files into script folder and then give them execute permissions, our script would look like this:
#!/bin/bash
for FILE in $HOME/*.bash; do
mv $FILE ${HOME}/scripts
chmod +x ${HOME}/scripts/${FILE}
doneThe while loop tests a condition and loops a sequence of commands until that condition is true. A condition is nothing more than primary is used in if..then conditions. So while loop looks like this:
while [[ condition ]]
do
# statements
doneJust like in the case of the for loop, if we want to write do and condition in the same line, then we must use a semicolon before do.
A working example might look like this:
#!/bin/bash
# Squares of numbers from 1 to 10
x=0
while [[ $x -lt 10 ]]; do # value of x is less than 10
echo $(($x*$x))
x=`expr $x + 1` # increase x
doneThe until loop is the exact opposite of the while loop. Like a while it checks a test condition, but it keeps looping as long as this condition is false:
until [[ conditions ]]; do
#statements
doneThe select loop help us to organize a user menu. It has almost the same syntax as for loop:
select answer in elem1 elem2 ... elemN
do
# statements
doneThe select prints all elem1..elemN on the screen with their sequence numbers, after that it prompts the user. Usually it looks like #? (PS3 variable). The answer will save in answer. If answer is the number between 1..N, then statements will execute and select will go to the next iteration — that's because we should use break statement.
A working example might look like this:
#!/bin/bash
PS3="Choose the package manager: "
select ITEM in bower npm gem pip
do
echo -n "Enter the package name: " && read PACKAGE
case $ITEM in
bower) bower install $PACKAGE ;;
npm) npm install $PACKAGE ;;
gem) gem install $PACKAGE ;;
pip) pip install $PACKAGE ;;
esac;
break # avoid infinite loop
doneThis example, asks the user what package manager {s,he} would like to use. Then, it will ask what package we want to install and finally proceeed to install it.
If we run this, we will get:
$ ./my_script
1) bower
2) npm
3) gem
4) pip
Choose the package manager: 2
Enter the package name: bash-handbook
<installing bash-handbook>
There are situation when we need to stop a loop before its normal ending or step over iteration. In cases like those, we can use the shell built-in break and continue statements. Both of these work with every kind of loop.
The break statement is used to exit the current loop before its ending. We have already met with it.
The continue statement steps over one iteration. We can use it such as:
for (( i = 0; i < 10; i++ )); do
if [[ $(($i % 2)) == 0 ]]; then continue; fi;
echo $i
doneIf we run example above, it will print all odd numbers from 0 to 10.
In scripts we have ability to define and call functions. As in any programming language, functions in bash are chunks of code, but there are other differences.
In bash, functions are a sequence of commands grouped under a single name, that is the name of the function. Calling a function is the same as calling any other program, you just write the name and the function will be invoked.
We can declare our own function this way:
my_func () {
# statements
}
my_func # call my_funcWe must declare functions before we can execute them.
Functions can take on arguments and return a result — exit code. Arguments, within functions, are treated in the same manner as arguments given to the script in non-interactive mode — using positional parameters. A result code can be returned using the return command.
Below is a function that takes a name and returns 0, indicating successful execution.
# function with params
greeting () {
if [[ -n $1 ]]; then
echo "Hello, $1!"
else
echo "Hello, unknown!"
fi
return 0
}
greeting Denys # Hello, Denys!
greeting # Hello, unknown!We already discussed exit codes. The return command returns the exit code of the last executed command. Above, return 0 will return a successful exit code. 0.
The shell give us tools for debugging scripts. If we want to run script in debug mode, we use a special option in our script's shebang:
#!/bin/bash optionsThese options are settings that change shell behavior. The following table is a list of options which might be useful for you:
| Short | Name | Description |
|---|---|---|
-f |
noglob | Disable filename expansion (globbing). |
-i |
interactive | Script runs in interactive mode. |
-n |
noexec | Read command, but don't execute them (syntax check). |
-t |
— | Exit after first command. |
-v |
verbose | Print each command to stdout before executing it. |
-x |
xtrace | Print each command to stdout before executing it and expands commands. |
For example, we have script with -x option such as:
#!/bin/bash -x
for (( i = 0; i < 3; i++ )); do
echo $i
doneThis will print the value of the variables to stdout along with other useful information:
$ ./my_script
+ (( i = 0 ))
+ (( i < 3 ))
+ echo 0
0
+ (( i++ ))
+ (( i < 3 ))
+ echo 1
1
+ (( i++ ))
+ (( i < 3 ))
+ echo 2
2
+ (( i++ ))
+ (( i < 3 ))
Sometimes we need to debug a part of a script. In this case using the set is convenient. This command can enable and disable options. Options are turned on using - and turned off using +:
#!/bin/bash
echo "xtrace is turned off"
set -x
echo "xtrace is enabled"
set +x
echo "xtrace is turned off again"I hope this small handbook was interesting and helpful. To be honest, I wrote this handbook for myself so as to not forget the bash basics. I tried to write concisely but meaningfully, and I hope you will appreciate that.
This handbook narrates my own experience with Bash. It does not purport to be comprehensive, so if you still want more, please run man bash and start there.
Contributions are absolutely welcome and I will be grateful for any corrections or questions you can send my way. For all of that create a new issue.
Thanks for reading this handbook!