fix(deps): update module go.opentelemetry.io/collector/pdata to v1.20.0 (main)

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
go.opentelemetry.io/collector/pdata	v1.15.0 -> v1.20.0

---

Release Notes

open-telemetry/opentelemetry-collector (go.opentelemetry.io/collector/pdata)

v1.20.0

💡 Enhancements 💡

• cmd/builder: Allow for replacing of local Providers and Converters when building custom collector with ocb. (#​11649)
  Use the property path under gomod to replace an go module with a local folder in
  builder-config.yaml. Ex:
  providers:
  - gomod: module.url/my/custom/provider v1.2.3
  path: /path/to/local/provider

• cmd/builder: Allow configuring confmap.Converter components in ocb. (#​11582)
  If no converters are specified, there will be no converters added.
  Currently, the only published converter is expandconverter which is
  deprecated as of v0.107.0, but can still be added for testing purposes.

  To configure a custom converter, make sure your converter implements the converter
  interface and is published as a go module (or replaced locally if not published).
  You may then use the converters key in your OCB build manifest with a list of
  Go modules (and replaces as necessary) to include your converter.

  Please note that converters are order-dependent. The confmap will apply converters
  in order of which they are listed in your manifest if there is more than one.

• all: shorten time period before removing an unmaintained component from 6 months to 3 months (#​11664)

🧰 Bug fixes 🧰

• all: Updates dialer timeout section documentation in confignet README (#​11685)
• scraperhelper: If the scraper shuts down, do not scrape first. (#​11632)
  When the scraper is shutting down, it currently will scrape at least once.
  With this change, upon receiving a shutdown order, the receiver's scraperhelper will exit immediately.

v1.19.0

🛑 Breaking changes 🛑

• internal/fanoutconsumer: Extract internal/fanoutconsumer as a separate go module (#​11441)
• builder: Remove builder support to build old version, and the otelcol_version config (#​11405)
  User should remove this property from their config, to build older versions use older builders.
• receiver: Make receivertest into its own module (#​11462)
• builder: Remove deprecated flags from Builder (#​11576)
  Here is the list of flags | --name, --description, --version, --otelcol-version, --go, --module
• internal/sharedcomponent: Extract internal/sharedcomponent as a separate go module (#​11442)

💡 Enhancements 💡

• mdatagen: Add otlp as supported distribution (#​11527)
• batchprocessor: Move single shard batcher creation to the constructor (#​11594)
• service: add support for using the otelzap bridge and emit logs using the OTel Go SDK (#​10544)

🧰 Bug fixes 🧰

• service: ensure traces and logs emitted by the otel go SDK use the same resource information (#​11578)
• config/configgrpc: Patch for bug in the grpc-go NewClient that makes the way the hostname is resolved incompatible with the way proxy setting are applied. (#​11537)
• builder: Update builder default providers to lastest stable releases (#​11566)

v1.18.0

🛑 Breaking changes 🛑

• consumer/consumererror: Extract consumer/consumererror as a separate go module (#​11440)
• exporter/expotertest: Put expotertest into its own module (#​11461)
• service: Remove stable gate component.UseLocalHostAsDefaultHost (#​11412)

🚩 Deprecations 🚩

• processortest: Deprecated 'NewUnhealthyProcessorCreateSettings'. Use NewNopSettings instead. (#​11307)

💡 Enhancements 💡

• mdatagen: Added generated_package_name config field to support custom generated package name. (#​11231)
• mdatagen: Generate documentation for components with resource attributes only (#​10705)
• confighttp: Adding support for lz4 compression into the project (#​9128)
• service: Hide profiles support behind a feature gate while it remains alpha. (#​11477)
• exporterhelper: Retry sender will fail fast when the context timeout is shorter than the next retry interval. (#​11183)

🧰 Bug fixes 🧰

• cmd/builder: Fix default configuration for builder for httpprovider, httpsprovider, and yamlprovider. (#​11357)
• processorhelper: Fix issue where in/out parameters were not recorded when error was returned from consumer. (#​11351)

v1.17.0

🛑 Breaking changes 🛑

• service/telemetry: Change default metrics address to "localhost:8888" instead of ":8888" (#​11251)
  This behavior can be disabled by disabling the feature gate 'telemetry.UseLocalHostAsDefaultMetricsAddress'.
• loggingexporter: Removed the deprecated logging exporter. Use the debug exporter instead. (#​11037)

🚩 Deprecations 🚩

• service/telemetry: Deprecate service::telemetry::metrics::address in favor of service::telemetry::metrics::readers. (#​11205)
• processorhelper: Deprecate BuildProcessorMetricName as it's no longer needed since introduction of mdatagen (#​11302)

💡 Enhancements 💡

• ocb: create docker images for OCB, per https://github.com/open-telemetry/opentelemetry-collector-releases/pull/671 (#​5712)
  Adds standard Docker images for OCB to Dockerhub and GitHub, see hub.docker.com/r/otel/opentelemetry-collector-builder
• confighttp: Snappy compression to lazy read for memory efficiency (#​11177)
• httpsprovider: Mark the httpsprovider as stable. (#​11191)
• httpprovider: Mark the httpprovider as stable. (#​11191)
• yamlprovider: Mark the yamlprovider as stable. (#​11192)
• confmap: Allow using any YAML structure as a string when loading configuration including time.Time formats (#​10659)
  Previously, fields with time.Time formats could not be used as strings in configurations

🧰 Bug fixes 🧰

• processorhelper: Fix data race condition, concurrent writes to the err variable, causes UB (Undefined Behavior) (#​11350)
• cmd/builder: re-adds function to properly set and view version number of OpenTelemetry Collector Builder (ocb) binaries (#​11208)
• pdata: Unmarshal Span and SpanLink flags from JSON (#​11267)

v1.16.0

🛑 Breaking changes 🛑

• processorhelper: Update incoming/outgoing metrics to a single metric with a otel.signal attributes. (#​11144)
  The following metrics were added in the previous version
  • otelcol_processor_incoming_spans
  • otelcol_processor_outgoing_spans
  • otelcol_processor_incoming_metric_points
  • otelcol_processor_outgoing_metric_points
  • otelcol_processor_incoming_log_records
  • otelcol_processor_outgoing_log_records
    They are being replaced with the following to more closely align with OTEP 259:
  • otelcol_processor_incoming_items
  • otelcol_processor_outgoing_items
• processorhelper: Remove deprecated [Traces|Metrics|Logs]Inserted funcs (#​11151)
• config: Mark UseLocalHostAsDefaultHostfeatureGate as stable (#​11235)

🚩 Deprecations 🚩

• processorhelper: deprecate accepted/refused/dropped metrics (#​11201)
  The following metrics are being deprecated as they were only used in a single
  processor:
  • otelcol_processor_accepted_log_records
  • otelcol_processor_accepted_metric_points
  • otelcol_processor_accepted_spans
  • otelcol_processor_dropped_log_records
  • otelcol_processor_dropped_metric_points
  • otelcol_processor_dropped_spans
  • otelcol_processor_refused_log_records
  • otelcol_processor_refused_metric_points
  • otelcol_processor_refused_spans

💡 Enhancements 💡

• pdata: Add support to MoveTo for Map, allow avoiding copies (#​11175)
• mdatagen: Add stability field to telemetry metrics, allowing the generated description to include a stability string. (#​11160)
• confignet: Mark module as Stable. (#​9801)
• confmap/provider/envprovider: Support default values when env var is empty (#​5228)
• mdatagen: mdatagen validateMetrics() support validate metrics in telemetry.metric (#​10925)
• service/telemetry: Mark useOtelWithSDKConfigurationForInternalTelemetry as stable (#​7532)
• mdatagen: Use cobra for the command, add version flag (#​11196)

🧰 Bug fixes 🧰

• service: Ensure process telemetry is registered when internal telemetry is configured with readers instead of an address. (#​11093)

• mdatagen: Fix incorrect generation of metric tests with boolean attributes. (#​11169)

• otelcol: Fix the Windows Event Log configuration when running the Collector as a Windows service. (#​5297, #​11051)

• builder: Honor build_tags in config (#​11156)

• builder: Fix version for providers in the default config (#​11123)

• cmd/builder: Temporarily disable strict versioning checks (#​11129, #​11152)
  The strict versioning check may be enabled by default in a future version once all configuration providers are stabilized.

• confmap: Fix loading config of a component from a different source. (#​11154)
  This issue only affected loading the whole component config, loading parts of a component config from a different source was working correctly.

---

Configuration

📅 Schedule: Branch creation - "before 9am on Monday" (UTC), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.