Blauberg EcoVent VENTO Expert A50/80/100 V.2 Fans

Home Assistant Integration. Integration for newest Fans with api version 2

Tested on:

• Blauberg VENTO Expert A50-1 W V.2

Currently supported:

• UI integration setup
• turn_on/turn_off
• Preset modes:
  • low
  • medium
  • high
  • manual
• In manual mode speed percentage
• Oscillating
  • When on, Fans are in 'heat_recovery' airflow
• Direction
  • "forward" means 'ventilation' airflow
  • "reverse" means 'air_supply' airflow

Changelog

version 0.0.5:

• Added sensors:

  • Humidity
  • Fan1 speed
  • Fan2 speed
  • Airflow

• Changed

  • Update method to DataUpdateCoordinator for reduced request to FAN device

version 0.1.0:

• Added sensors:
  • battery_voltage
  • timer_counter
  • humidity_treshold
  • filter_timer_countdown
  • boost_time
  • machine_hours
  • analogV
  • analogV_treshold

All sensors are categorised and some are disabled by default.

version 0.2.0:

• Added binary sensors:
  • boost_status
  • timer_mode
  • humidity_sensor_state
  • relay_sensor_state
  • relay_status
  • filter_replacement_status
  • alarm_status
  • cloud_server_state
  • humidity_status
  • analogV_status

All sensors are categorised and some are disabled by default.

• Changed:
  • Removed default IP address from config input field Host
  • Added some icon defintions to sensors
  • Battery percent caluclation

version 0.2.0:

• Added services
  • filter_timer_reset (Reset air filter timer)
  • reset_alarms (Reset fan Vento alarms)
• Changed:
  • From binary sensor to switch:
    • humidity_sensor_state
    • relay_sensor_state
    • analogV_sensor_state

version 0.4.0

• Added broadcast devices search
  • hack, that searches on network, if string: is entered instead of IP address
  • this is not yer proper HomaAssistant Auto Discovery, but it seems to work on my network

version 0.5.0

• Mainly fixes from autmated checks and hopefuly some latency improvements
  • Removed await coordinator in turn_on/turn_off and other interactive functions
  • Some cleanup in config_flow
  • Removed deprecated set_speed functions
  • Fix error if _battery_voltage is None

version 0.6.0

• Timeout Loop bailout

version 0.7.0

• Fix manifest, to require correct pyEcovent version (0.9.14)

version 0.8.0

• Removed calling blocking sleep in event loop

version 0.9.0

• Cleanup some definitions for HA checks

version 0.9.1

• replaced hass.config_entries.async_setup_platforms with await hass.config_entries.async_forward_entry_setups
• thanks to @berndulum for issue report

version 0.9.2

• fix name of sensor leaking to device name (hopefuly)

version 0.9.3

• bump requirements to pyEcoventV2==0.9.16 (fixed boost_status reading)

version 0.9.5

• Merged pull request for file "protocol.md" by @Styx85.

version 0.9.6

• Fix: Humidy Threshold creates errors trouble in newest HA #21
• humidity_treshold, analogV_treshold, boost_timer changed from sensor to number. Now they can be configured via HomeAssistant.

Version 0.9.7

• Updatet README.md

Version 0.9.8

• Fix number entities names.

Version 0.9.9

• more entities names fixes.

Version 1.0.0

• some more name fixes
• fix code to be more compliant with latest HA
• some code cleanup

Version 1.0.1

• Values for humidity_threshold, analogV_threshold and boost ime read from device on initialization.